journal article·2019-12

Microstructure and properties of hot stamping boron steel using heated dies under different holding time

Chenchen Li, Silu Xie

Vacuum· Volume 170
Publisher page

Abstract

Abstract A range of materials with different properties is obtained by hot stamping under different holding time and a constant mold temperature of 500 °C. In this process, a blank is austenitized and quenched in one step. The microstructure, hardness, phase volume fraction and mechanical properties are investigated in this paper. With the holding time increasing, the test results show that the vickers hardness and the martensite volume fraction is reduced. The hardness of materials were between 280 and 455 HV0.1. Combined with SEM and colour tint etched methods, the proportion of martensite was quantification, which was between 89% and 2%. When the holding time is 3 s, the tensile strength of material arrived 1500Mpa. The tensile strength of the material tends to be stable at 780Mpa when the holding time reaches 20s. The plastic properties of the materials are better with the holding time increasing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Advanced high-strength steel and carbon fiber reinforced polymer composite body in white for passenger cars: environmental performance and sustainable return on investment under different propulsion modes10.1021/acssuschemeng.8b05588 ↗
2. Advanced lightweight materials and manufacturing processes for automotive applications10.1557/mrs.2015.268 ↗
3. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
4. Hot stamping of ultra-high strength steel parts, CIRP10.1016/j.cirp.2017.05.007 ↗
5. Effect of hot-stamping process conditions on the changes in material strength[J]10.1007/s12239-015-0063-9 ↗
6. Hot stamping of boron steel sheets with tailored properties: a review10.1016/j.jmatprotec.2015.09.023 ↗
7. Development of a hot stamped channel section with axially tailored properties–experiments and models10.1007/s12289-017-1338-7 ↗
8. Sensitivity of the final properties of tailored hot stamping components to the process and material parameters10.1016/j.jmatprotec.2014.11.033 ↗
9. Testing of a hot stamped axial crush member with tailored properties–Experiments and models10.1016/j.ijimpeng.2017.01.003 ↗
10. A process-performance coupled design method for hot-stamped tailor rolled blank structure10.1016/j.tws.2019.03.037 ↗
11. Research on the effect of boundary pressure on the boundary heat transfer coefficients between hot stamping die and boron steel10.1016/j.ijheatmasstransfer.2015.07.102 ↗
12. Hot forming of boron steels using heated and cooled tooling for tailored properties10.1016/j.jmatprotec.2012.06.028 ↗
13. Tailored die quenching of steel parts having strength distribution using bypass resistance heating in hot stamping10.1016/j.jmatprotec.2012.10.005 ↗
14. Color tint-etching for multiphase steels
15. On the ferrite and bainite transformation in isothermally deformed 22MnB5 steels10.1016/j.msea.2012.04.091 ↗
16. The influence of martensite, bainite and ferrite on the as-quenched constitutive response of simultaneously quenched and deformed boron steel–Experiments and model10.1016/j.matdes.2013.10.014 ↗