journal article·2019-11

Design and parameter optimization of contactless vertical inductive angle sensor

Zhipeng Li, Chao Zhang, Songzhuo Shi, Xu Meng, Bonan Wang

Vacuum· Volume 169
Publisher page

Abstract

Abstract Contactless inductive angle sensors are widely used in the industrial field. To date, the contactless inductive angle sensor is a planar structure, and its physical structure limits the number of turns of the excitation coil, resulting in a small eddy current on the rotor, which increases the measurement accuracy error of the sensor. Therefore, in view of reducing the sensor volume and reducing the sensor measurement accuracy error, a contactless vertical inductive angle sensor is designed. Through modeling and simulation, when the position of the rotor and stator changes, the induced voltage in the receiving coil changes sinusoidally. The structural parameters that have the greatest influence on the measurement accuracy error of the sensor are obtained by simulation. Because of the complex electromagnetic structure of the sensor, the linearly-decrease inertia weight particle swarm optimization (LIWPSO) and finite element method (FEM) are used to optimize the sensor measurement accuracy error. In the simulation, the measurement accuracy error of the optimized sensor is 0.778% in the angle range of 0°–40°. The sensor is manufactured and tested for the optimized parameters, and the observed experimental measurement accuracy error is 0.981% in the angle range of 0°–40°.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Field Sensors Techniques · Advanced Measurement and Metrology Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Development of a steering angle and torque sensor of contact-type
2. Integrated optical sensor in a digital microfluidic platform
3. A contactless capacitive angular-position sensor10.1109/JSEN.2003.817182 ↗
4. A new position sensor based on the MDL technique10.1016/j.sna.2006.04.015 ↗
5. Contactless position sensor using magnetic saturation10.1016/S0924-4247(03)00154-7 ↗
6. Eddy current sensors on printed circuit board for compact mechatronic application
7. Development of a respiratory inductive plethysmography module supporting multiple sensors for wearable systems10.3390/s121013167 ↗
8. Electromagnetic finite element analysis for designing high frequency inductive position sensors10.1109/20.952694 ↗
9. Advances in inductive position sensor technology10.1108/02602281011022742 ↗
10. Mechatronics and drive-by-wire systems advanced non-contacting position sensors10.1016/S0967-0661(02)00146-6 ↗
11. Darran Kreit, Mark Anthony Howard. Inductive Position Sensor, US 8020 453 B2, (September 20), 2011.
12. A novel absolute angular position sensor based on electromagnetism10.1016/j.sna.2013.01.040 ↗
13. Ely, D.T.F.; Dames, A.N. Position sensor having compact arrangement of coils. U.S. Patent 6,522,128, 18 February 2003.
14. Study of eddy current power loss in an RCS vacuum chamber10.1088/1674-1137/36/2/011 ↗
15. A comparison of cover coat methods for electronic flexible printed circuit (E-FPC) based on peeling strength10.4028/www.scientific.net/AMR.421.489 ↗
16. Development and testing of a new thrust stand for micro-thrust measurement in vacuum conditions10.1016/j.vacuum.2012.10.013 ↗
17. Rahmat-Samii · 1999
18. Particle swarm optimization in electromagentics10.1109/TAP.2004.823969 ↗
19. Nonlinearity analysis and parameters optimization for an inductive angle sensor10.3390/s140304111 ↗
20. Empirical study of particle swarm optimization
21. Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy10.1016/j.vacuum.2018.09.050 ↗
22. A modified particle swarm optimizer
23. A Triaxial accelerometer calibration method using a mathematical model10.1109/TIM.2009.2031849 ↗
24. Direct and indirect strain measurement of flexible printed circuit boards – fPCBs10.4028/www.scientific.net/AMR.655-657.88 ↗
25. Ultra-thin piezoelectric strain sensor array integrated on flexible printed circuit for structural health monitoring
26. Effect of inductive coil shape on sensing performance of linear displacement sensor using thin inductive coil and pattern guide10.3390/s111110522 ↗
27. A simple forward direct problem solver for eddy current non-destructive inspection of aluminum plates using uniform field probes10.1016/j.measurement.2011.03.029 ↗
28. Magnetic field-based Eddy-Current Modeling for multilayered specimens10.1109/TMAG.2007.904930 ↗
29. Resonant enhancement of a passive coil-capacitance loop in eddy current sensing path10.1016/j.measurement.2011.12.006 ↗
30. Optimization of inductive angle sensor using response surface methodology and finite element method10.1016/j.measurement.2013.11.017 ↗
31. Karan · 1992 · 263
32. Simulation and optimization of asynchronous AC motor control by particle swarm optimization (PSO) and emperor algorithm
33. Rotor study of inductive angle sensor
34. A compact inductive position sensor made by inkjet printing technology on a flexible substrate10.3390/s120201288 ↗
35. Development of a new angular displacement sensor based on principle of vernier caliper. C
36. Design of reliable interface system for eddy current displacement sensors in vacuum environments1
37. A novel eddy current angle sensor for electrohydraulic rotary valves10.1088/0957-0233/19/1/015205 ↗
38. Modification of the Maxwell-Wien Bridge for accurate measurement of a process variable by an inductive transducer10.1109/TIM.2009.2032962 ↗