journal article·2019-09

Adhesion of hydrogenated amorphous carbon films on ferrous alloy by intermediate nitrogen plasma treatment in silicon-containing interlayers

Carla D. Boeira, Leonardo M. Leidens, Ângela E. Crespi, Marcelo E.H. Maia da Costa, Carlos A. Figueroa, Alexandre F. Michels

Vacuum· Volume 167
Publisher page

Abstract

Abstract Hydrogenated amorphous carbon (a-C:H) thin films show low adhesion on ferrous alloys. The addition of a silicon-containing interlayer could minimize the problem but traditionally high deposition temperatures are still needed (at least 300 °C). However, recently, plasma modifications of interlayers deposited under lower temperatures could promote similar results. In order to investigate if nitrogen plasma treatment could also be responsible for better interaction of interfaces and, consequently, better adhesion, different times of this treatment were performed on the outermost interface of silicon-containing interlayers deposited at 150 °C on AISI 52100 steel prior to a-C:H films deposition. The results show that nitrogen plasma modifies the chemical bonding and composition of the interlayer in function of time but without thickness changes. An finest treatment time was found in 20 min, promoting better adhesion of a-C:H when compared with the same conditions without N2 treatment. Finally, a chemical mechanism due to nitrogen plasma treatment is proposed, where a-C:H coatings adhesion is maximized in high N/O and low Si/C ratios.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Protective double-layer coatings prepared by plasma enhanced chemical vapor deposition on tool steel10.1016/j.surfcoat.2015.04.002 ↗
2. Nitrogen incorporation into hard amorphous carbon films obtained by RF plasma decomposition of CH4-N2 gas mixtures10.1002/pssb.2221920218 ↗
3. Effect of film thickness and interlayer on the adhesion strength of diamond like carbon films on different substrates10.1016/j.diamond.2007.02.003 ↗
4. Mechanical stability of DLC films on metallic substrates Part II — interfacial toughness, debonding and blistering10.1016/S0040-6090(97)00703-7 ↗
5. DLC films grown on steel using an innovator active screen system for PECVD technique10.1590/1980-5373-MR-2015-0456 ↗
6. Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel10.1016/j.ijmachtools.2007.09.007 ↗
7. A comprehensive study on different silicon-containing interlayers for a-C:H adhesion on ferrous alloys10.1016/j.tsf.2017.10.043 ↗
8. Understanding the hydrogen and oxygen gas pressure dependence of the tribological properties of silicon oxide-doped hydrogenated amorphous carbon coatings10.1016/j.carbon.2015.06.004 ↗
9. Solid lubricants : a review
10. Tribological properties and high-speed drilling performance of Zr – C : H : N x % coatings with different amounts of nitrogen addition10.1007/s10853-009-3467-y ↗
11. Cavitation erosion behavior of nanocrystalline diamond thin films on silicon substrates
12. XPS study of the a-C:H/Ti and a-C:H/a-Si interfaces10.1016/j.vacuum.2006.01.008 ↗
13. Identification of the chemical bonding prompting adhesion of aC: H thin films on ferrous alloy intermediated by a SiC x: H buffer layer10.1021/acsami.5b03554 ↗
14. In fl uence of chemical bonding on the variability of diamond-like carbon nanoscale adhesion10.1016/j.carbon.2017.11.040 ↗
15. a-SiCx:H flms deposited by plasma-enhanced chemical vapor deposition at low temperature used for moisture and corrosion resistant applications10.1016/S0040-6090(99)00363-6 ↗
16. Improvement of the properties and the adherence of DLC coatings deposited using a modified pulsed-DC PECVD technique and an additional cathode10.1016/j.surfcoat.2016.08.096 ↗
17. Adherent amorphous hydrogenated carbon films on metals deposited by plasma enhanced chemical vapor deposition10.1016/j.tsf.2007.08.007 ↗
18. Mechanical properties of a-C:H/Si-containing a-C:H multilayered coatings grown by LF-PECVD10.1016/j.surfcoat.2008.08.008 ↗
19. Comparison of a-C : N : H layers grown at the anode and cathode in RF- PACVD processing10.1016/j.vacuum.2017.09.025 ↗
20. Argon plasma treatment on metal substrates and effects on diamond‐like carbon (DLC) coating properties
21. Tribology of diamond-like carbon films: recent progress and future prospects10.1088/0022-3727/39/18/R01 ↗
22. H thin films for applications in solar cells as passivation and antireflective coatings
23. Hydrogenated silicon carbon nitride films obtained by HWCVD, PA-HWCVD and PECVD techniques10.1016/j.jnoncrysol.2006.02.025 ↗
24. Comparative study of the tribological behavior under hybrid lubrication of diamond-like carbon films with different adhesion interfaces10.1016/j.apsusc.2013.08.105 ↗
25. Hydrogen plasma etching mechanism at the a-C:H/a-SiC x :H interface: a key factor for a-C:H adhesion10.1016/j.apsusc.2018.05.203 ↗
26. Surface & Coatings Technology Evaluation of the mechanical behaviour of a DLC fi lm on plasma nitrided AISI 420 with different surface fi nishing10.1016/j.surfcoat.2013.08.059 ↗
27. Moreno-Barcenas · 2018
28. Oxygen effects in plasma nitriding of ferrous alloys10.1002/ppap.200731807 ↗
29. Characterization of hard amorphous carbon films implanted with nitrogen ions10.1016/0168-583X(93)90821-M ↗
30. Chemical structure of silicon-, oxygen- and nitrogen-containing a-C:H films prepared by RF plasma beam CVD10.1016/j.tsf.2004.11.136 ↗
31. Enhancing the adhesion of diamond-like carbon films to steel substrates using silicon-containing interlayers10.1016/j.surfcoat.2018.06.055 ↗
32. Nanomechanical properties of silicon-, oxygen- and nitrogen-containing a-C:H films prepared by RF plasma beam CVD10.1016/j.tsf.2004.11.168 ↗
33. Haynes · 2016
34. Gallo · 2011
35. Effects of annealing temperature on the optical, bonding, structural and electrical properties of nitrogenated amorphous carbon thin films grown by surface wave microwave plasma chemical vapor deposition10.1007/s10853-005-2635-y ↗
36. On the hydrogenated silicon carbide (SiCx:H) interlayer properties prompting adhesion of hydrogenated amorphous carbon (a-C:H) deposited on steel10.1016/j.vacuum.2014.07.015 ↗
37. Adhesion studies of diamond-like carbon films on 202 stainless steel substrate with a silicon interlayer
38. Physicochemical structure of SiCx:H to improve DLC adhesion on steel10.1080/02670844.2016.1159277 ↗
39. Effect of H2 and O2 plasma etching treatment on the surface of diamond-like carbon thin film10.1016/j.apsusc.2008.03.170 ↗
40. Structure of low dielectric constant to extreme low dielectric constant SiCOH films: Fourier transform infrared spectroscopy characterization10.1063/1.1618358 ↗
41. Synthesis of PECVD a-SiCXNY:H membranes as molecular sieves for small gas separation10.1016/j.memsci.2008.12.028 ↗