journal article·2019-06

Effect of DC bias and RF self-bias on the structure and properties of chromium oxide coatings prepared by vacuum cathodic arc deposition

Kai Huang, LiuHe Li, Lei Wang, GuoDong Li, Ye Xu

Vacuum· Volume 164
Publisher page

Abstract

Abstract Cr2O3 coatings were prepared by vacuum cathodic arc deposition (VCAD) on cemented carbide YT15 at different voltages of both direct current (DC) and radio frequency (RF) bias. The structure and properties of the coatings were investigated by scanning electron microscope, X-ray diffraction, and nanoindentation. With both DC and RF bias, coatings deposited at zero and low bias voltage exhibit a columnar structure and a preferred orientation (PO) of (104). As the bias voltage increases, the columnar structure starts to disappear and PO gradually becomes (006). Besides, the crystallite size of the coatings declines as the bias voltage increases. Comparing to DC bias, the RF bias leads to smaller crystallite size by virtue of higher energy and density of ion bombardment. The electrical resistivity of the coatings and saturation ion current density during deposition were measured to explain this effect. The hardness of the coatings was significantly enhanced by the bias voltage, particularly by the RF bias. A nano-hardness of 44.7 GPa was found in the coating deposited under −100 V RF bias, which has not been previously reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Characterization of sputter-deposited chromium oxide thin films10.1016/S0257-8972(99)00384-9 ↗
2. Tribological studies of chromium oxide films for magnetic recording applications10.1016/S0040-6090(97)00453-7 ↗
3. Development of surface coatings for air-lubricated
4. High temperature friction and wear characteristics of various coating materials for steam valve spindle application[J]10.1016/S0043-1648(00)00390-2 ↗
5. Friction and wear characteristics of plasma sprayed Al2O3 40%TiO2 and Cr2O3 coatings on aluminum alloy[J]
6. α-Cr2O3 template-texture effect on α-Al2O3 thin-film growth10.1016/j.tsf.2008.03.038 ↗
7. Phase control of Al2O3 thin films grown at low temperatures10.1016/j.tsf.2006.01.016 ↗
8. Microstructure of alpha-alumina thin films deposited at low temperatures on chromia template layers10.1116/1.1636157 ↗
9. Low temperature deposition of α-Al2O3 thin films by sputtering using a Cr2O3 template10.1116/1.1513641 ↗
10. Study on nanocrystalline Cr2O3 films deposited by arc ion plating: I. composition, morphology, and microstructure analysis10.1016/j.surfcoat.2011.10.058 ↗
11. Texture and microstructure of Cr2O3 and (Cr,Al)2O3 thin films deposited by reactive inductively coupled plasma magnetron sputtering10.1016/j.tsf.2010.01.008 ↗
12. Study on chromium oxide synthesized by unbalanced magnetron sputtering10.1016/S0040-6090(98)01266-8 ↗
13. Microstructures and mechanical properties of chromium oxide films by arc ion plating10.1016/j.matlet.2003.12.029 ↗
14. Plasma enhanced chemical vapor deposition of Cr2O3 thin films using chromium hexacarbonyl (Cr(CO)6) precursor10.1016/j.tsf.2008.02.027 ↗
15. Chromium oxide films fabricated by Cr(CO)6 chemical vapor deposition10.1016/0040-6090(91)90349-3 ↗
16. Tribological behaviour of plasma-sprayed chromium oxide coating10.1016/S0043-1648(98)00390-1 ↗
17. Deposition of α-Al2O3 hard coatings by reactive magnetron sputtering10.1016/j.surfcoat.2003.11.017 ↗
18. Different approaches to superhard coatings and nanocomposites10.1016/j.tsf.2004.10.053 ↗
19. Influence of bias voltage on the hardness and toughness of CrAlN coatings via magnetron sputtering10.1016/j.surfcoat.2012.06.041 ↗
20. Study on nanocrystalline Cr2O3 films deposited by arc ion plating: II. Mechanical and tribological properties10.1016/j.surfcoat.2011.10.026 ↗
21. Study and elaboration of ternary chromium based compounds (Cr, O, N) deposited by vacuum arc evaporation10.1016/S0257-8972(97)00272-7 ↗
22. Role of deposition parameters on microstructure and mechanical properties of chromium oxide coatings10.1016/j.surfcoat.2007.04.066 ↗
23. Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering10.1016/j.apsusc.2008.08.057 ↗
24. Plasma potentials of 13.56-MHz rf argon glow discharges in a planar system10.1063/1.335396 ↗
25. X-ray diffraction analysis of the residual stress state in PVD TiN/CrN multilayer coatings deposited on tool steel10.1016/j.surfcoat.2005.02.081 ↗
26. Evolutionary selection, a principle governing growth orientation in vapour-deposited layers
27. Microstructural evolution during film growth10.1116/1.1601610 ↗
28. Comprehensive perspective on the mechanism of preferred orientation in reactive-sputter-deposited nitrides10.1116/1.1619414 ↗
29. Structural, magnetic, electronic, defect, and diffusion properties of Cr2O3: a DFT+U study10.1021/jp5039943 ↗
30. Ion induced stress generation in arc-evaporated TiN films10.1063/1.360272 ↗
31. Estimation of residual stress and its effects on the mechanical properties of detonation gun sprayed WC–Co coatings10.1016/j.msea.2009.10.009 ↗
32. Correlative plasma-surface model for metastable Cr-Al-N: frenkel pair formation and influence of the stress state on the elastic properties10.1063/1.4985172 ↗
33. Toward hard yet tough ceramic coatings10.1016/j.surfcoat.2014.07.007 ↗