journal article·2019-02

One-step in-situ reaction synthesis of TiC/graphene composite thin film for titanium foil surface reinforcement

Bingwei Luo, Haitao Zhou, Dabo Liu, Fei Luo, Ye Tian, Dongsheng Chen, Wei Wei

Vacuum· Volume 160
Publisher page

Abstract

Abstract TiC/graphene composite layer was successfully in-situ grown on the surface of Ti foil by a one-step plasma enhanced chemical vapor deposition (PECVD) method. The as-prepared sample was systematically characterized by X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The results showed the composite layer was uniformly distributed on the surface of Ti foil with strong binding force. The surface hardness values of bare Ti foil and Ti/TiC/graphene composite were 204.84 HV and 641.18 HV, respectively, and the yield strength average values of annealed Ti and Ti/TiC/graphene were 137.3 MPa and 141 Mpa, respectively. The surface hardness of the TiC/graphene layer could be significantly increased twice as that of the bare Ti foil surface while maintained the strength stability. Nanoindentor results showed the significantly improved surface hardness could be attributed to the TiC layers. This study provides a facile strategy for surface reinforcement of Ti and its alloys, showing great potential for future application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB+TiC)/Ti composite10.1016/j.jallcom.2017.09.033 ↗
2. Rapid in-situ reaction synthesis of novel TiC and carbon nanotubes reinforced titanium matrix composites10.1016/j.jmst.2017.07.005 ↗
3. The formation mechanism of TiC reinforcement and improved tensile strength in additive manufactured Ti matrix nanocomposite10.1016/j.vacuum.2017.05.029 ↗
4. In-situ synthesis of TiC/Ti composite coating by high frequency induction cladding10.1016/j.jallcom.2017.01.084 ↗
5. Phase composition and tribological properties of TieAl coatings produced on pure Ti by laser cladding10.1016/j.apsusc.2007.05.056 ↗
6. A study on wear resistance and microcrack of the Ti3Al/TiAl+TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy10.1016/j.apsusc.2010.08.094 ↗
7. In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating10.1016/j.jallcom.2017.12.364 ↗
8. Microstructure and fracture behavior of TiC particles reinforced Inconel 625 composites prepared by laser additive manufacturing10.1016/j.jallcom.2017.10.280 ↗
9. Mechanism of in situ synthesis of TiC in Cu melts and its microstructures10.1016/j.jallcom.2016.12.018 ↗
10. Synthesis of Ni-TiC composite powder electrochemically in molten chlorides10.1016/j.jallcom.2016.08.101 ↗
11. Effect of TiC addition on surface oxidation behavior of SKD11 tool steel composites10.1016/j.apsusc.2016.11.164 ↗
12. Effect of molybdenum on the high-temperature properties of TiC-TiB2 reinforced Fe-based composite laser cladding coatings10.1016/j.jallcom.2018.01.275 ↗
13. Effects of pulse parameters on in-situ Ti-V carbides size and properties of Fe-based laser cladding layers10.1016/j.surfcoat.2018.03.021 ↗
14. Cavitation erosion mechanisms in stainless steels and in composite metaleceramic HVOF coatings10.1016/j.wear.2016.07.015 ↗
15. Optimizing wear resistance of ceramic (TiN, WC and TiC) clad layer by gas tungsten arc welding (GTAW)10.1108/ilt-03-2012-0030 ↗
16. Fabrication and properties of Al2O3-TiB2-TiC/Al metal matrix composite coatings by atmospheric plasma spraying of SHS powders10.1016/j.jallcom.2016.02.116 ↗
17. Metal nitride/graphene nanohybrids: general synthesis and multifunctional titanium nitride/graphene electrocatalyst10.1002/adma.201102772 ↗
18. Nitrogen-enriched core-shell structured Fe/Fe3C-C nanorods as advanced electrocatalysts for oxygen reduction reaction10.1002/adma.201104392 ↗
19. Controllable preparation of vertically standing graphene sheets and their wettability and supercapacitive properties
20. Probing the intrinsic properties of exfoliated graphene: Raman spectroscopy of free-standing monolayers10.1021/nl8031444 ↗
21. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
22. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
23. Raman spectroscopy of graphene and graphite: disorder, electron-phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
24. Controlled synthesis of large-scale, uniform, vertically standing graphene for high-performance field emitters10.1002/adma.201203902 ↗