Microstructures and mechanical properties of Ti Cr N/Al Ti Cr based coatings prepared by plasma nitriding 5083 Al alloys co-deposited with Ti Cr films
Source abstract
Abstract
Abstract A duplex treatment involving sputtering Ti Cr film followed with plasma nitriding was employed to in-situ fabricate multilayer coatings on the surface of 5083 Al alloys. Ti Cr films with different Cr addition were firstly sputtered on 5083 Al alloys by using magnetron sputtering, then nitrided at 460 °C under the N2 H2 gas condition. Results showed that the as-obtained coatings were composed of the outside (Ti, Cr)N0.3 or (Ti,Cr)N layer and the inside Al18(Ti,Cr)2Mg3 layer. With increasing Cr content in the Ti Cr film, (Ti,Cr)N phase was inclined to form in the outside layer and the Al18(Ti,Cr)2Mg3 layer increased the thickness. Meanwhile, the surface hardness of multilayer coatings was enhanced and reached the maximum value of ∼1020 HV. Specimens with outside (Ti,Cr)N layer showed better wear resistance than specimens with outside (Ti,Cr)N0.3 layer. The nitrided specimens exhibited mainly adhesive wear and abrasive wear accompanied with oxidation wear.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Microstructure and tribological properties of Ti (Cr) SiCN coating deposited by plasma enhanced magnetron sputtering10.1016/j.vacuum.2012.03.053 ↗
2. Effect of the modulation ratio on the interface structure of TiAlN/TiN and TiAlN/ZrN multilayers: first-principles and experimental investigations10.1016/j.actamat.2017.03.053 ↗
3. Thick CrN/TiN multilayers deposited by arc ion plating10.1016/j.vacuum.2011.12.004 ↗
4. Improvement on hardness and corrosion resistance of ferritic stainless steel via PVD-(Ti, Cr) N coatings10.1016/j.surfcoat.2012.05.095 ↗
5. Contact mechanics of coating-substrate systems: monolayer and multilayer coatings10.1016/j.acme.2012.07.004 ↗
6. Improvement of the corrosion resistance of PVD hard coating–substrate systems10.1016/S0257-8972(99)00551-4 ↗
7. Microstructure, mechanical and tribological characterization of CrN/DLC/Cr-DLC multilayer coating with improved adhesive wear resistance10.1016/j.apsusc.2017.12.266 ↗
8. Fracture and deformation mechanism of Ti (C, N)/TiAlSiN multilayer coating: FE modeling and experiments10.1016/j.ceramint.2016.10.141 ↗
9. Wear resistant super-hard multilayer transition metal-nitride coatings10.1016/j.surfin.2017.03.001 ↗
10. Structure and properties of NbN/Mon nano-multilayer coatings deposited by magnetron sputtering, J. Alloy10.1016/j.jallcom.2017.09.218 ↗
11. Microstructure and properties of metal/ceramic and ceramic/ceramic multilayer coatings on titanium alloy Ti6Al4V10.1016/j.surfcoat.2016.11.003 ↗
12. Wear behaviour and rolling contact fatigue life of Ti/TiN/DLC multilayer films fabricated on bearing steel by PIIID10.1016/j.vacuum.2011.02.015 ↗
13. Multilayer design of CrN/Mon protective coatings for enhanced hardness and toughness10.1016/j.jallcom.2017.07.010 ↗
14. Structure and thermal properties of TiAlN/CrN multilayered coatings with various modulation ratios10.1016/j.surfcoat.2016.07.055 ↗
15. Structural, mechanical and corrosion resistance properties of Ti/TiN bilayers deposited by magnetron sputtering on AISI 316L10.1016/j.surfcoat.2017.05.075 ↗
16. Influence of ion bombardment on structure and properties of TiZrN thin film10.1016/j.apsusc.2015.02.190 ↗
17. Self-lubricating CrAlN/VN multilayer coatings at room temperature10.1016/j.apsusc.2013.04.068 ↗
18. Structure and mechanical properties of graded Cr/CrN/CrTiN coatings synthesized by close field unbalanced magnetron sputtering10.1016/j.surfcoat.2016.10.087 ↗
19. Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings10.1016/j.ceramint.2014.07.067 ↗
20. Corrosion protection of magnetron sputtered TiN coatings deposited on high strength aluminium alloys10.1016/j.surfcoat.2003.09.015 ↗
21. Effect of negatively charged ions on the formation of microarc oxidation coating on 2024 aluminium alloy10.1016/S1005-0302(12)60119-4 ↗
22. Wear of plasma-nitrided aluminum alloys10.1016/j.wear.2005.02.119 ↗
23. Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloy10.1016/j.wear.2011.12.005 ↗
24. Microstructure evolution and wear resistance of nitride/aluminide coatings on the surface of Ti-coated 2024 Al alloy during plasma nitriding10.1016/j.ceramint.2017.05.109 ↗
25. Microstructure and mechanical properties of multiphase coating produced by plasma nitriding Ti coated GB-5083 aluminum alloy10.1016/j.surfcoat.2014.05.055 ↗
26. Microstructure and mechanical properties of multiphase layer formed during depositing Ti film followed by plasma nitriding on 2024 aluminum alloy10.1016/j.apsusc.2014.02.091 ↗
27. Microstructure and nanomechanical properties of magnetron sputtered Ti-Nb films10.1016/j.surfcoat.2016.06.014 ↗
28. The phase, morphology and surface characterization of Ti–Mo alloy films prepared by magnetron sputtering10.1039/C7RA10510J ↗
29. Study on the active screen plasma nitriding and its nitriding mechanism10.1016/j.surfcoat.2006.03.045 ↗
30. A new model for growth mechanism of nitride layers in plasma nitriding of AISI H11 hot work tool steel10.1016/j.vacuum.2017.03.032 ↗
31. Microstructure and nanomechanical properties of co-deposited Ti-Cr films prepared by magnetron sputtering10.1016/j.surfcoat.2017.07.005 ↗
32. Characterization of titanium chromium nitride nanocomposite protective coatings10.1016/j.apsusc.2004.02.019 ↗
33. Characterization of TiCr(C, N)/amorphous carbon coatings synthesized by a cathodic arc deposition process10.1016/j.tsf.2006.11.028 ↗
34. TEM study on oxidized TiCrN coatings ion-plated on a steel substrate10.1016/S0257-8972(03)00519-X ↗
35. Properties of (Ti, Cr) N and (Al, Cr) N thin films prepared by ion beam assisted deposition10.1016/j.vacuum.2009.01.059 ↗
36. Structure and properties of Ti films deposited by dc magnetron sputtering, pulsed dc magnetron sputtering and cathodic arc evaporation10.1016/j.surfcoat.2016.06.083 ↗
37. Deposition of Cr films by hot target magnetron sputtering on biased substrates10.1016/j.surfcoat.2018.07.047 ↗
38. In-situ fabrication of novel (Ti, Cr)-N/aluminide multilayer coatings by plasma nitriding Ti-Cr coated Al alloy10.1016/j.ceramint.2018.01.182 ↗