journal article·2018-08

Effects of reheating temperature and isothermal holding time on the morphology and thixo-formability of SiC particles reinforced AZ91 magnesium matrix composite

Yu-Shi Yi, Rong-Fei Li, Zong-Yao Xie, Yi Meng, Sumio Sugiyama

Vacuum· Volume 154
Publisher page

Abstract

Abstract SiC particles (SiCp) reinforced AZ91 magnesium (Mg) matrix composite manufactured by stir casting and hot extrusion was as starting material in a series of reheating-isothermal holding experiments and thixo-compression tests. Semisolid slurries composed of α-Mg grains and SiCp surrounded by liquid phase were obtained by heating the starting material to its semisolid temperature. Coalescence of α-Mg grains and coarsening of liquid phase occurred during further isothermal holding. α-Mg, SiCp, and liquid phase exhibited different forming behaviors in thixo-compressions. More and wider paths for outflow of liquid were formed in the semisolid slurry held at higher reheating temperature isothermally for a longer time. SiCp flowed outward together with the liquid phase through these paths during compression and resulted in segregations of liquid phase and SiCp in the compressed specimen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Magnesium: properties – applications – potential10.1016/S0921-5093(00)01351-4 ↗
2. Hot tensile behavior of an extruded Al–Zn–Mg–Cu alloy in the solid and in the semi-solid state10.1016/j.matdes.2013.08.010 ↗
3. Ageing behavior of as-cast SiCp/AZ91 Mg matrix composites10.1016/j.msea.2016.11.072 ↗
4. High strength SiCp/AZ91 composite assisted by dynamic precipitated Mg17Al12 phase10.1016/j.jallcom.2017.10.164 ↗
5. Damping capacities and tensile properties in Grp/AZ91 and SiCp/Grp/AZ91 magnesium matrix composites
6. Fabrication and properties of magnesium matrix composite reinforced by urchin-like carbon nanotube-alumina in situ composite structure10.1016/j.jallcom.2018.02.273 ↗
7. In situ synthesis of a gamma-Al2O3 whisker reinforced aluminium matrix composite by cold pressing and sintering10.1016/j.msea.2017.10.063 ↗
8. Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)10.1016/j.matchar.2016.10.003 ↗
9. Microstructure evolutions for SiCp/AZ91 Mg Matrix composites during hot compression10.1016/j.msea.2012.08.054 ↗
10. Behavior of metal alloys in the semisolid state10.1007/BF02661090 ↗
11. Effects of SiC particle pretreatment and stirring parameters on the microstructure and mechanical properties of SiCp/Al–6.8Mg composites fabricated by semi-solid stirring technique10.1016/j.msea.2010.09.046 ↗
12. Mushy/semi-solid metal forming technology – present and future10.1016/S0007-8506(07)61705-3 ↗
13. Effects of processing parameters on the microstructure of ECAE-formed AZ91D magnesium alloy in the semi-solid state10.1016/j.jallcom.2008.10.101 ↗
14. Application of the combined neuro-computing, fuzzy logic and swarm intelligence for optimization of compocast nanocomposites10.1177/0021998314538871 ↗
15. Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques10.1007/s00521-014-1724-8 ↗
16. Optimization of the EMS process parameters in compocasting of high-wear-resistant Al-nano-TiC composites10.1007/s00339-016-9840-1 ↗
17. Wear properties of rheo-squeeze cast aluminum matrix reinforced with nano particulates10.1134/S2070205116030266 ↗
18. Squeeze casting of electromagnetically stirred aluminum matrix nanocomposites in semi-solid condition using hybrid algorithm optimized parameters10.4149/km_2017_1_33 ↗
19. Microstructure and mechanical properties of the semisolid slurries and rheoformed component of nano-sized SiC/7075 aluminum matrix composite prepared by ultrasonic-assisted semisolid stirring10.1016/j.msea.2015.04.064 ↗
20. High strength and good ductility at elevated temperature of nano-SiCp/Al2014 composites fabricated by semi-solid stir casting combined with hot extrusion10.1016/j.msea.2014.12.089 ↗
21. Solution treatment: a route towards enhancing tensile ductility of SiCp/6061Al composite via powder thixoforming and comparison of micromechanical strength modeling10.1016/j.msea.2017.04.090 ↗
22. Microstructure evolution of semisolid billet of nano-sized SiC/7075 aluminum matrix composite during partial remelting process10.1016/j.matdes.2016.02.021 ↗
23. Yuanyuan Wan, Microstructure evolution of SiCp/ZM6 (Mg–Nd–Zn) magnesium matrix composite in the semi-solid state10.1016/j.jallcom.2015.09.135 ↗
24. Microstructures, mechanical properties, and wear resistances of thixoextruded SiCp/WE43 magnesium matrix composites10.1007/s11661-017-4104-z ↗
25. K.P. Young, C.P. Kyonka, J.A. Courtois, Fine grained metal composition. US Patent (1983) 4,415,374.
26. D.H. Kirkwood, C.M. Sellars, L.G. Eliasboyed, Fine grained metal composition. US Patent (1991) 5,037,498.
27. Recrystallisation in the semi-solid state in 7075 aluminium alloy10.1016/j.msea.2008.01.057 ↗
28. Partial melting behavior and thixoforming properties of extruded magnesium alloy AZ91 with and without addition of SiC particles with a volume fraction of 15%
29. Effect of SiC nanoparticle concentration on the properties of oxide films formed on Ti–10V–2Fe–3Al alloy10.1016/j.vacuum.2015.10.005 ↗
30. Constitutive behavior of aluminum alloy in a wide temperature range from warm to semi-solid regions10.1016/j.jallcom.2016.02.254 ↗
31. Microstructural evolution and mechanical properties of Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr alloy prepared via pre-ageing and hot extrusion10.1016/j.msea.2014.11.061 ↗
32. Microstructural evolution and tensile mechanical properties of thixoforged ZK60-Y magnesium alloys produced by two different routes10.1016/j.matdes.2009.10.056 ↗
33. Thixoforming of a high performance HP9/4/30 steel10.1016/j.msea.2004.12.013 ↗
34. Evolutions of microstructure and mechanical properties for SiCp/AZ91 composites with different particle contents during extrusion10.1016/j.msea.2015.03.058 ↗
35. Structure and properties of a hypoeutectic chromium steel processed in the semisolid state10.1016/j.actamat.2006.02.021 ↗
36. An investigation of microstructure evolution of RAP processed ZK60 magnesium alloy10.1016/j.msea.2008.09.059 ↗
37. Effects of reheating and subsequent rapid cooling on microstructural evolution and semisolid forming behaviors of extruded Mg–8.20Gd–4.48Y–3.34Zn–0.36Zr alloy10.1016/j.jmatprotec.2017.04.001 ↗
38. Effect of accumulative plastic deformation on generation of spheroidal structure, thixoformability and mechanical properties of large-size AM60 magnesium alloy10.1016/j.jallcom.2015.01.185 ↗
39. Partial melting behaviors and thixoforming properties of cast and extruded Mg-5.15Y-3.75Gd-3.05Zn-0.75Zr alloys10.1016/j.vacuum.2018.01.041 ↗