journal article·2018-07

AFM study on the surface morphologies of TiN films prepared by magnetron sputtering and Al 2 O 3 films prepared by atomic layer deposition

Li Du, Hei Wong, Shurong Dong, Wai-Shing Lau, V. Filip

Vacuum· Volume 153
Publisher page

Abstract

Abstract This paper reports the results of a comprehensive study conducted on the effect of surface morphology of titanium nitride (TiN) electrodes deposited by magnetron sputtering and the possibility of improving metal/insulator/metal (MIM) capacitor characteristics with Al2O3 dielectric obtained by atomic layer deposition (ALD). From the atomic force microscopy (AFM) study, we found that the bottom TiN layer is rougher for thicker films. Post metallization annealing can slightly reduce the roughness. In the case of the Al2O3 dielectric layer deposition, low-temperature ALD is preferred in order to obtain smaller surface roughness. Deposition of a dielectric layer at higher temperatures results in rougher surface because of poor chemisorption of precursors on the rough surface and the forming of crystalline phases. Electrical measurements show that the barrier at the top electrode is much larger than that at the bottom electrode due to the smaller roughness of the Al2O3 surface. Trade-off is required for depositions of both the bottom electrode and the dielectric layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Characterization and comparison of PECVD silicon nitride and silicon oxynitride dielectrics for MIM capacitors10.1109/LED.2003.815154 ↗
2. A high performance MIM capacitor using HfO2 dielectrics10.1109/LED.2002.802602 ↗
3. Electrical characterisation and reliability of HfO2 and Al2O3-HfO2 MIM capacitors10.1016/S0026-2714(03)00181-1 ↗
4. Ultrahigh capacitance density for multiple ALD-grown MIM capacitor stacks in 3-D silicon10.1109/LED.2008.923205 ↗
5. Surface smoothing effect of an amorphous thin film deposited by atomic layer deposition on a surface with nano-sized roughness10.1063/1.4866988 ↗
6. The application of a selective etch to conclusively show the surface smoothing effect of an amorphous thin film deposited by atomic layer deposition10.1149/2.0061708jss ↗
7. Surface-roughness effect on capacitance and leakage current of an insulating film10.1103/PhysRevB.60.9157 ↗
8. Anisotropy of the electronic work function of metals10.1103/PhysRev.60.661 ↗
9. Impact of electrode roughness on metal-insulator-metal tunnel diodes with atomic layer deposited Al2O3 tunnel barriers10.1116/1.3658380 ↗
10. Fabrication of metal-insulator-metal capacitors with SiNx thin films deposited by plasma-enhanced chemical vapor deposition10.4313/TEEM.2009.10.5.147 ↗
11. Wong · 2011
12. Bruker NanoScope Analysis, ftp://Release:Z3Analysis91@sboftp.bruker-nano.com.
13. Schwierz · 2010
14. Low-temperature Al2O3 atomic layer deposition10.1021/cm0304546 ↗
15. Electronic structure of α-Al2O3: Ab initio simulations and comparison with experiment10.1134/S0021364007030071 ↗
16. Subthreshold parameters of radio-frequency multi-finger nanometer MOS transistors10.1016/j.microrel.2009.01.004 ↗
17. Conduction mechanisms in MOS gate dielectric films10.1016/j.microrel.2004.01.013 ↗
18. Reliability improvements of TiN/Al2O3/TiN for linear high voltage metal–insulator–metal capacitors using an optimized thermal treatment
19. Study of grain boundary tunneling in barium-titanate ceramic films