journal article·2018-06Open access

Ln 2 NiO 4+δ (Ln = La, Pr, Nd) coatings deposited by reactive magnetron sputtering as cathode material for intermediate temperature solid oxide fuel cell

J. Fondard, A. Billard, G. Bertrand, P. Briois

Vacuum· Volume 152
Publisher page

Abstract

This work focuses on the comparison of Ln-Ni-O coatings (Ln = La, Nd, Pr) deposited by reactive magnetron sputtering using Plasma Emission Monitoring (PEM) which allows high deposition rate. Each layer is deposited by different steps. The optimal regulation setpoint for oxide rare-earth deposition is determined and then the current dissipated on the nickel target is adjusted to obtain the convenient Ln/Ni ratio and to achieve the K2NiF4 structure. After an appropriate annealing treatment, all coatings exhibit crystalline structures, which depend on the Ln/Ni ratio. Due to the instability of Pr2NiO4 structure at intermediate temperatures, the crystallization step of praseodymium nickelate is performed at higher temperature than the other materials. This further thermal treatment implies a more porous structure. Each coating exhibits interesting properties. Electrical and electrochemical characterizations performed on these deposits prove better properties of the praseodymium nickelate coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Performance of LSCF cathodes in cell tests10.1016/j.jpowsour.2005.08.015 ↗
2. Performance of XSCoF (X= Ba, La and Sm) and LSCrX'(X′= Mn, Fe and Al) perovskite-structure materials on LSGM electrolyte for IT-SOFC10.1016/j.electacta.2006.09.004 ↗
3. A-site deficient (La0.6Sr0.4)1−sFe0.8Co0.2O3−δ perovskites as SOFC cathodes10.1016/j.ssi.2007.07.012 ↗
4. Fabrication and characterization of SDC-SSC composite cathode for anode supported solid oxide fuel cell10.1016/j.jpowsour.2010.12.036 ↗
5. Perovskite and A2MO4-type oxides as new cathode materials for protonic solid oxide fuel cells10.1016/j.electacta.2010.05.034 ↗
6. Low temperature diffusion and oxygen stoichiometry in lanthanum nickelate10.1016/j.ssi.2010.01.016 ↗
7. New cathode materials for ITSOFC: phase stability, oxygen exchange and cathode properties of La2 − xNiO4 + δ10.1016/j.ssi.2008.06.019 ↗
8. Kinetic parameters influencing the performance of IT-SOFC composite electrodes10.1016/S0167-2738(00)00393-3 ↗
9. Recent development of SOFC metallic interconnect10.1016/S1005-0302(10)60049-7 ↗
10. Novel La2NiO4+δ and La4Ni3O10−δ composites for solid oxide fuel cell cathodes10.1016/j.jpowsour.2013.06.106 ↗
11. Development of lanthanum nickelate as a cathode for use in intermediate temperature solid oxide fuel cells10.1016/j.ssi.2010.02.014 ↗
12. Oxygen electrode reaction on Nd2NiO4+δ cathode materials: impedance spectroscopy study10.1016/S0167-2738(02)00689-6 ↗
13. Influence of crystallinity and particle size on the electrochemical properties of spray pyrolyzed Nd2NiO4+δ powders10.1016/j.electacta.2012.07.134 ↗
14. A new anode material for solid oxide electrolyser: the neodymium nickelate Nd2NiO4+δ10.1016/j.jpowsour.2009.08.003 ↗
15. Neodymium-deficient nickelate oxide Nd1.95NiO4+δ as cathode material for anode-supported intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2008.06.072 ↗
16. Electrochemical performance and stability of the cathode for solid oxide fuel cells: V. high performance and stable Pr2NiO4 as the cathode for solid oxide fuel cells10.1016/j.electacta.2012.03.067 ↗
17. Oxygen non-stoichiometry and electrical conductivity of Pr2−xSrxNiO4±δ with x = 0–0.510.1016/j.ssi.2006.05.018 ↗
18. High performance praseodymium nickelate oxide cathode for low temperature solid oxide fuel cell10.1016/j.jpowsour.2010.09.036 ↗
19. Comparative study of electrochemical properties of mixed conducting Ln2NiO4+δ (Ln = La, Pr and Nd) and La0.6Sr0.4Fe0.8Co0.2O310.1016/j.ssi.2013.06.009 ↗
20. Porous La0.6Sr0.4CoO3− δ thin film cathodes for large area micro solid oxide fuel cell power generators10.1016/j.jpowsour.2013.10.038 ↗
21. The potential and challenges of thin-film electrolyte and nanostructured electrode for yttria-stabilized zirconia-base anode-supported solid oxide fuel cells10.1016/j.jpowsour.2013.08.072 ↗
22. Influence of thin films structure of Gd0.5Sr0.5CoO3 cathode on impedance spectroscopy
23. Electrochemical evaluation of La2NiO4+δ as a cathode material for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2014.02.106 ↗
24. Manufacturing and testing of a metal supported Ni-YSZ/YSZ/La2NiO4 IT-SOFC synthesized by physical surface deposition processes10.1016/j.ssi.2017.07.027 ↗
25. A comparison of electrical properties of sputter-deposited electrolyte coatings dedicated to intermediate temperature solid oxide fuel cells10.1016/j.surfcoat.2006.01.061 ↗
26. Protective YSZ-based thin films deposited by RF magnetron sputtering10.1016/j.vacuum.2009.03.020 ↗
27. Characterization of solid oxide fuel cell device having a three-layer film structure grown by RF magnetron sputtering10.1016/S0042-207X(02)00126-4 ↗
28. Ce0.8Gd0.2O2−δ protecting layers manufactured by physical vapor deposition for IT-SOFC10.1016/j.ssi.2007.12.008 ↗
29. Application of PVD methods to solid oxide fuel cells10.1016/j.apsusc.2014.03.163 ↗
30. Pederson · 2006 · vol 80 · 1066
31. Structural and electrical characterisation of lanthanum nickelate reactively sputter-deposited thin films10.1016/j.tsf.2007.08.107 ↗
32. Synthesis and characterization of La2NiO4+δ coatings deposited by reactive magnetron sputtering using plasma emission monitoring10.1016/j.ssi.2014.07.017 ↗
33. Effect of total pressure on La2NiO4 coatings deposited by reactive magnetron sputtering using plasma emission monitoring10.1016/j.surfcoat.2015.11.053 ↗
34. Attempted modelling of thickness and chemical heterogeneity in coatings prepared by d.c. reactive magnetron sputtering10.1016/0257-8972(93)90052-P ↗
35. Reactive high rate D.C. sputtering: deposition rate, stoichiometry and features of TiOx and TiNx films with respect to the target mode10.1016/0040-6090(84)90147-0 ↗
36. An optical emission spectroscopy study of a reactive magnetron sputtering Ar-O2 discharge modulated at low frequency10.1016/S0257-8972(97)00511-2 ↗
37. Reactive co-sputter deposition of YSZ coatings using plasma emission monitoring10.1016/j.surfcoat.2011.02.024 ↗
38. Stability and oxygen transport properties of Pr2NiO4+δ ceramics10.1016/j.jeurceramsoc.2007.02.136 ↗
39. Oxygen exchange in Pr2NiO4+δ at high temperature and direct formation of Pr4Ni3O10−x10.1006/jssc.2000.8786 ↗
40. A comparative study of the Ruddlesden-Popper series, Lan+1NinO3n+1 (n = 1, 2 and 3), for solid-oxide fuel-cell cathode applications10.1016/j.ssi.2006.05.005 ↗
41. Oxygen diffusion and transport properties in non-stoichiometric Ln2-xNiO4+δ oxides10.1016/j.ssi.2005.06.033 ↗
42. Mixed conductivity, oxygen permeability and redox behavior of K2NiF4-type La2Ni0.9Fe0.1O4+δ10.1016/j.jssc.2008.03.019 ↗
43. The impedance of thin dense oxide cathodes10.1016/j.ssi.2010.05.037 ↗
44. Electrocatalysis and inductive effects at the gas Pt/Stabilized Zirconia interface10.1149/1.2100614 ↗
45. Oxygen reduction reaction on Ruddlesden-Popper phases studied by impedance spectroscopy10.1149/1.3511770 ↗
46. A kinetic study of oxygen reduction reaction on La2NiO4 cathodes by means of impedance spectroscopy10.1016/j.jelechem.2007.08.006 ↗