Influence of In content on physical properties of β-type TiNbZrIn powders prepared by mechanical alloying
Source abstract
Abstract
Abstract We report on the influence of indium (abbreviated as In hereafter) content on physical properties of β-type Ti-28Nb-2Zr-xIn (x = 2, 4, 8 and 12 wt%) powders prepared by mechanical alloying and provide fundamental insight into their underlying densification behaviors. Results show that although the In elements can completely be dissolved into the lattice of Ti to form β-type solid solutions, the significant increase in the lattice parameter of β-Ti phase, average particle size, crystalline defects' content and thus exothermic enthalpy, together with the decrease in grain size, are found for the four alloyed powders with the increased In content. Interestingly, this causes the insignificant differences and significant increases in displacement and instantaneous densification rate at the demarcation point of about 500 °C. The results may provide significant insight into the composition design of biomedical β-type titanium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
2. Invited Review - new developments of Ti-based alloys for biomedical applications10.3390/ma7031709 ↗
3. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
4. Effect of thermomechanical processing on microstructure of a Ti–13Nb–13Zr alloy10.1016/S0925-8388(01)01604-8 ↗
5. Phase transformations in Ti- Nb- Ta and Ti-Nb-Ta-Zr alloys10.1023/A:1004792922155 ↗
6. Elastic deformation behaviour of Ti–24Nb–4Zr–7.9Sn for biomedical applications10.1016/j.actbio.2006.11.002 ↗
7. Elastic softening of β-type Ti–Nb alloys by indium (In) additions10.1016/j.jmbbm.2014.07.010 ↗
8. Ultrafine-grained Ti-based composites with high strength and low modulus fabricated by spark plasma sintering10.1016/j.msea.2012.09.047 ↗
9. Biomedical TiNbZrTaSi alloys designed by d-electron alloy design theory10.1016/j.matdes.2015.06.176 ↗
10. Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys10.1016/j.matdes.2015.03.028 ↗
11. Influence of Nb on the β →α″ martensitic phase transformation and properties of the newly designed Ti–Fe–Nb alloys10.1016/j.msec.2015.11.072 ↗
12. Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition10.1016/j.matdes.2016.02.094 ↗
13. Dai · 2009
14. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering10.1016/j.actamat.2017.04.062 ↗
15. Non-isothermal and isothermal crystallization kinetics and their effect on microstructure of sintered and crystallized TiNbZrTaSi bulk alloys10.1016/j.jnoncrysol.2015.11.005 ↗
16. Effect of Fe content on glass-forming ability and crystallization behavior of a (Ti69.7Nb23.7Zr4.9Ta1.7)100-xFex alloy synthesized by mechanical alloying10.1016/j.jallcom.2012.10.154 ↗
17. Influence of powder properties on densification mechanism during spark plasma sintering10.1016/j.scriptamat.2017.06.034 ↗
18. Designing biocompatible Ti-based metallic glasses for implant applications10.1016/j.msec.2012.11.015 ↗
19. Binary titanium alloys as dental implant materials - a review
20. Brandes · 2004 · 15
21. Microstructure and mechanical properties of a spark plasma sintered Fe-11Cr-2.3B-6Al-15Mn alloy10.1016/j.vacuum.2018.01.029 ↗
22. Cullity · 1988 · 102
23. Effect of HA (Hydroxyapatite) content on the microstructure, mechanical and corrosion properties of (Ti-13Nb-13Zr)-xHA biocomposites synthesized by sparkle plasma sintering10.1016/j.vacuum.2016.06.015 ↗
24. Mechanical behaviors of porous Ti with high porosity and large pore size prepared by one-step spark plasma sintering technique10.1016/j.vacuum.2015.09.024 ↗
25. Oxygen-induced amorphization of metallic titanium by ball milling10.1557/jmr.2007.0243 ↗
26. Criterion for predicting the glass-forming ability of alloys10.1063/1.2713867 ↗
27. Microstructure evolution and thermal properties in nanocrystalline Fe during mechanical attrition10.1016/S1359-6454(00)00310-4 ↗
28. Serrated flow behavior of titanium-based composites with different in situ TiC contents10.1002/adem.201500145 ↗
29. Unusual glass-forming ability of bulk amorphous alloys based on ordinary metal copper10.1103/PhysRevLett.92.245504 ↗
30. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
31. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
32. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗