NEG coating deposition and characterisation of narrow-gap insertion devices and small-diameter chambers for light sources and particle accelerators
Source abstract
Abstract
Abstract NEG-coating technology is becoming very popular in the particle accelerator community, as it provides a very effective mean to reduce the surface outgassing while significantly increasing the pumping efficiency of the beam pipes. An extensive use of NEG coatings is especially suitable in view of next-generation machines, for which long and small-aperture tubes (i.e., down to 4 mm) are envisaged in order to reach even higher luminosities and lower emittances. Such stringent requirements should be carefully addressed, as a number of technical issues arise—both in terms of coating deposition and characterisation—when dealing with narrow-gap beam pipes of this kind. The use of NEG coating for narrow-gap insertion devices has steadily grown over the past ten years; a review of both current R&D activities and future perspectives in this field is presented, together with an overview of the analytical techniques employed for the characterisation of the film deposited on small-section chambers. These include SEM morphological inspections, chemical composition analyses and thickness profiling made by EDS and measurements of the getter film's sorption capacity for CO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Particle accelerators and beam dynamics · Particle Accelerators and Free-Electron Lasers · Plasma Diagnostics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Nonevaporable getter films for ultrahigh vacuum applications10.1116/1.580963 ↗
2. A novel route to extreme vacua: the non-evaporable getter thin film coatings10.1016/S0042-207X(98)00377-7 ↗
3. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
4. Ti-Zr-V non-evaporable getter films: from development to large scale production for the Large Hadron Collider10.1016/j.tsf.2005.12.218 ↗
5. Decreasing surface outgassing by thin film getter coatings10.1016/S0042-207X(98)00017-7 ↗
6. The secondary electron yield of TiZr and TiZrV non-evaporable getter thin film coatings10.1016/S0169-4332(00)00838-2 ↗
7. Synchrotron radiation-induced desorption from a NEG-coated vacuum chamber10.1016/S0042-207X(00)00247-5 ↗
8. Comparative study of photodesorption from TiZrV coated and uncoated stainless steel vacuum chambers10.1016/j.vacuum.2004.01.080 ↗
9. Electron stimulated desorption from bare and nonevaporable getter coated stainless steels10.1116/1.3478672 ↗
10. Effect of coating morphology on the electron stimulated desorption from Ti-Zr-Hf-V nonevaporable-getter-coated stainless steel10.1016/j.vacuum.2012.04.033 ↗
11. Design of the vacuum system for Diamond, the UK third generation light source10.1016/j.vacuum.2003.12.019 ↗
12. Bregliozzi · 2008 · 3685
13. Herbeaux · 2008 · 3711
14. Vacuum stability and residual gas density estimation for the vacuum chamber upgrade of the ATLAS interaction region of the Large Hadron Collider10.1016/j.vacuum.2012.03.041 ↗
15. Bregliozzi · 2013 · 3397
16. Manini · 2006 · 1435
17. Bonucci · 2007 · 209
18. Calatroni · 2013 · 3385
19. Seraphim · 2015 · 2744
20. Comparison of Ti-Zr-V nonevaporable getter films deposited using alloy or twisted wire sputter-targets10.1116/1.3504600 ↗
21. Cox · 2008 · 1995
22. Performance of the insertion device NEG-coated aluminum vacuum chamber at ELETTRA10.1080/08940880208602953 ↗
23. Bonucci · 2005 · 93
24. A simple, high-yield, apparatus for NEG coating of vacuum beamline elements10.1088/1748-0221/5/12/P12007 ↗
25. Recommended procedure for measuring pumping speeds10.1116/1.574420 ↗
26. ASTM, F798-97 · 2002
27. A. Bonucci, A. Conte, P. Manini, S. Raimondi, The transmission factor method: in-situ characterization of getter coated pipes, Synchrotron Radiation Instrumentation; Part One (AIP Conference Proceedings) 879 (2007) 432–435.
28. Test Particle Monte-Carlo modelling of installations for NEG film pumping properties evaluation10.1016/j.vacuum.2008.11.008 ↗
29. Porcelli · 2012 · 2525