journal article·2012-07

Effects of screen-grid bias voltage on the microstructure and properties of the ultrahigh molecular weight polyethylene (UHMWPE) modified by oxygen plasma

Yanan Pei, Dong Xie, Yongxiang Leng, Linmao Qian, Hong Sun, Nan Huang

Vacuum· Volume 86· Issue 12
Publisher page

Abstract

Abstract The specimens of ultrahigh molecular weight polyethylene (UHMWPE) were treated by oxygen plasma using a pulse-biased screen-grid technique under different negative bias conditions. The screen-grid was used to provide an electric field to accelerate the oxygen ions towards the UHMWPE substrate during the plasma treatment process. The effects of the screen-grid voltage on the surface microstructure, wettability, mechanical properties and wear resistance of UHMWPE were investigated. It was found that the degree of crosslinking, oxidation, wettability and surface roughness of UHMWPE can be increased with the increasing of the screen-grid voltage. Owing to the increase of the degree of crosslinking, the hardened layer formed on the surface of the UHMWPE samples was also strengthened greatly with the increase of the grid voltage. However, the wear results indicated that the UHMWPE sample modified at higher bias voltage exhibits poor wear performance, which could be mainly related to the embrittlement resulted from the aggravation of oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Friction and wear properties of UHMWPE composites reinforced with carbon fiber10.1016/j.matlet.2004.09.011 ↗
2. Biological reactions to wear debris in total joint replacement10.1243/0954411001535219 ↗
3. Loh IH. Plasma surface modification in biomedical applications. AST Technical journal, http://www.astp.com.
4. Ion beam application for improved polymer surface properties10.1016/0168-583X(93)95070-L ↗
5. Improved surface properties of polymer materials by multiple ion beam treatment10.1557/JMR.1991.0610 ↗
6. Hardness measurements of Ar+-beam treated polyimide by depth-sensing nanoindentation10.1557/JMR.1993.0377 ↗
7. The mechanical properties of the ultra-high molecular weight polyethylene (UHMWPE) modified by oxygen plasma10.1016/j.surfcoat.2010.08.120 ↗
8. Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma10.1016/j.apsusc.2010.01.054 ↗
9. Control of ion energy using a screen-grid in an electron cyclotron resonance chemical vapour deposition system10.1016/S0925-9635(98)00335-5 ↗
10. DC bias effects in the deposition of a-C: H films using the screen-grid method in electron cyclotron resonance chemical vapour deposition10.1016/S0925-9635(98)00180-0 ↗
11. Amorphous carbon films deposition using a DC-biased screen-grid in an electron cyclotron resonance plasma10.1016/S0042-207X(98)00192-4 ↗
12. Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty10.1016/S0142-9612(99)00053-8 ↗
13. A comparison of the effects of gamma radiation and low temperature hydrogen peroxide gas plasma sterilization on the molecular structure, fatigue resistance and wear behavior of ultra high molecular weight polyethylene10.1002/(SICI)1097-4636(19980605)40:3<378::AID-JBM6>3.0.CO;2-C ↗
14. Activation of polymer polyethylene terephthalate (PET) by exposure to CO2 and O2 plasma
15. Plasma surface modification of polyethylene10.1016/S0927-7757(03)00242-5 ↗
16. Investigating the effect of power/time in the wettability of Ar and O2 gas plasma-treated low-density polyethylene10.1016/j.porgcoat.2008.08.011 ↗
17. Scratch deformation of methanol plasticized poly(methylmethacrylate) surfaces10.1016/S0032-3861(97)00493-X ↗
18. Hardening and embrittlement of polyimides by ion implantation10.1016/0168-583X(94)95342-2 ↗
19. State of the art overview: ion beam surface modification of polymers towards improving tribological properties10.1016/S0257-8972(98)00698-7 ↗
20. Effects of simultaneous boron and nitrogen implantation on microhardness and fatigue properties of Fe–13Cr–15Ni alloys10.1007/BF02646687 ↗
21. Properties of crosslinked ultra-high-molecular-weight polyethylene10.1016/S0142-9612(00)00195-2 ↗
22. Ion-beam-induced hydrogen release from a-C: H: a bulk molecular recombination model10.1063/1.344116 ↗
23. Sliding wear behaviour of ion implanted ultra high molecular weight polyethylene against a surface modified titanium alloy Ti–6Al–4V10.1016/0301-679X(95)00116-L ↗
24. Bicinchoninic acid (BCA) assay in low volume10.1016/j.ab.2010.11.015 ↗
25. A study of biotribological behavior of DLC coatings and its influence to human serum albumin10.1016/j.diamond.2009.11.008 ↗