Experimental investigation of hydrogen absorption by commercial high alloyed Ti2AlNb-based alloy in cast and rapidly solidified state
Source abstract
Abstract
Abstract The possibility of hydrogenating a high alloyed intermetallic alloy based on Ti2AlNb compound with high hydrogen concentration at low pressure of about 0.1 MPa with hydride formation has been studied for the first time. The study is carried out using alloys fabricated by vacuum arc remelting (cast alloy) and pendent drop melt extraction (the rapidly solidified alloy). It is found that rapidly solidified alloy with β-phase can absorb more than 2.0 wt % H. The high absorbing ability of the rapidly solidified alloy (fiber) is associated with a fine-dispersed microstructure and a high specific surface area. The cast alloy of a similar chemical composition with a coarse-grained microstructure and low specific surface area has low absorption ability in various phase compositions with maximum hydrogen absorption degree of 0.44 wt % H in quenched β-phase state.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Hydrogen Storage and Materials · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Microstructures with martensitic features induced by absorption of a large amount of hydrogen in a B2 single-phase Ti-22Al-27Nb alloy10.1016/S1359-6454(02)00469-X ↗
2. Hydrogen absorption and desorption in a B2 single-phase Ti-22Al-27Nb alloy before and after deformation10.1016/S1359-6454(00)00400-6 ↗
3. Hydrogen absorption/desorption behavior of Ti–22Al–27Nb alloys with β single-phase and β/O two-phase microstructures10.1016/S0921-5093(01)01600-8 ↗
4. Multiphase and microstructure effects on the hydrogen absorption/desorption behavior of a Ti-22Al-27Nb alloy10.1016/S1359-6454(00)00402-X ↗
5. Hydrogen absorption in as-cast bcc single - phase Ti-Al-Nb alloys10.1016/j.jallcom.2010.06.026 ↗
6. Dissimilar diffusion bonding behavior of hydrogenated Ti2AlNb–based and Ti–6Al–4V alloys10.1016/j.matdes.2018.08.034 ↗
7. Effect of hydrogen on the structure of quenched orthorhombic titanium aluminide-based alloy and phase transformations during subsequent heating10.1134/S0031918X13060070 ↗
8. Formation of the structure and properties upon the aging of a quenched alloy based on orthorhombic titanium aluminide Ti2AlNb alloyed with hydrogen10.1134/S0031918X18040051 ↗
9. Embrittlement of an orthorhombic Ti2AlNb-based titanium alloy in a hydrogenated state10.1134/S0036029519010130 ↗
10. Effect of additional hydrogen alloying on the structure and the phase composition of a VTI-4 intermetallic alloy10.1134/S0036029519110107 ↗
11. Obtainment of fibers and porous materials from Ti2AlNb-based alloy10.1016/j.matlet.2017.05.110 ↗
12. Fabrication of intermetallic titanium alloy based on Ti2AlNb by rapid quenching of melt10.1007/s11041-017-0172-3 ↗
13. Phase transformation and microstructure control of Ti2AlNb-based alloys: a review10.1016/j.jmst.2020.11.022 ↗
14. Y. Zong, J. Wang, B. Shao, W. Tang, D. Shan, Mechanism and morphology evolution of the O phase transformation in Ti-22Al-25Nb alloy, J. Mater. Sci. Technol., 1, 89, (202) 97–106. https://doi.org/10.1016/j.jmst.2021.01.087.10.1016/j.jmst.2021.01.087 ↗
15. Hydrogenation process in multiphase alloys of Ti-Zr-Mn-V system on the example of Ti42.75Zr27Mn20.25V10 alloy10.1016/j.ijhydene.2020.11.283 ↗
16. Hydrogen desorption/absorption properties of the extensively cold rolled β Ti–40Nb alloy10.1016/j.ijhydene.2019.05.211 ↗
17. Effect of microstructure on the phase composition and hydrogen absorption–desorption behaviour of melt-spun Mg–20Ni–8Mm alloys10.1016/j.ijhydene.2011.09.126 ↗
18. Hydrogenation reaction of Mg-Based alloys fabricated by rapid solidification10.1007/s12540-013-2027-9 ↗
19. Effect of rapid solidification on hydrogen solubility in Mg-rich Mg-Ni alloys10.1016/j.ijhydene.2011.01.133 ↗
20. Hydrogen permeation in rapidly quenched amorphous and crystallized Nb20Ti40Ni40 alloy ribbons10.1016/j.ijhydene.2010.10.095 ↗
21. First hydrogenation of mechanically processed TiFe-based alloy synthesized by gas atomization10.1016/j.ijhydene.2020.11.237 ↗
22. Microstructural optimization of LaMg12 alloy for hydrogen storage10.1016/j.jallcom.2010.09.172 ↗
23. Evaluation of hydrogen storage performance of ZrTiVNiCrFe in electrochemical and gas-solid reactions10.1016/j.ijhydene.2019.06.157 ↗