Study of phase transformation and surface microstructure of alumina ceramic under irradiation of intense pulsed ion beam
Source abstract
Abstract
Abstract Intense pulsed ion beam (IPIB), featured with pulsed high-power density, has been widely used in the modification of structural material, especially in high strength materials. The effects of IPIB treatment on phase transformation and surface microstructure of alumina ceramics were investigated in this work. Experiments were carried out on the BIPPAB-450 accelerator with peak accelerating voltage and current density of 360 kV and 170 A/cm2. X-ray diffraction (XRD), scanning electron microscope (SEM) and atomic force microscope (AFM) were used to analyze the phase transformation and cross-section and surface morphology of alumina ceramics under IPIB treatment. The XRD pattern indicated that phase transformation from α-Al2O3 to γ-Al2O3 occurred on the irradiated area due to the combined effect of rapid re-solidification and thermal stress caused by IPIB. The SEM cross-section images indicated that homogeneous modified layer with thickness up to 1.53 μm was produced and cracks inside sample were observed as well after IPIB irradiation. The evolution of cracks on surface of samples with pulse number was investigated in this work. Micro-holes distributed on the net structure of cracks were observed after IPIB irradiation and the evolution of size and number of micro-holes with pulse number was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Pulsed Power Technology Applications · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. High intensity pulsed ion beam sources and their industrial applications10.1016/S0257-8972(99)00058-4 ↗
2. High-power pulsed ion beam modification of the surface properties of alumina ceramics10.1134/1.1398972 ↗
3. The ablation mass of metals by intense pulsed ion beam irradiation10.1016/j.nimb.2015.08.039 ↗
4. Novel microstructures on the surfaces of single crystal silicon irradiated by intense pulsed ion beams10.1016/j.nimb.2015.08.038 ↗
5. Ion processing of zirconium ceramics by high-power pulsed beams10.1134/S1063784215010120 ↗
6. Influence of a high-power pulsed ion beam on the mechanical properties of corundum ceramics10.1088/1757-899X/289/1/012019 ↗
7. The ablation of plastics by intense pulsed ion beam10.1016/j.surfcoat.2020.125338 ↗
8. Effects of high-intensity pulsed ion beam irradiation on the structural thermal stability of Fe 80 Si 7.43 B 12.57 metallic glass10.1016/j.fusengdes.2018.10.012 ↗
9. Structure and phase composition of tungsten alloys modified by compression plasma flows and high-intense pulsed ion beam impacts10.1016/j.apsusc.2019.06.113 ↗
10. Application of high-power ion beams for technology, laser part
11. Numerical analysis of thermodynamical process in the thin metal samples irradiated by IPIB10.1016/S1567-1739(01)00022-0 ↗
12. Structure and performance of YSZ thermal barrier coatings irradiated by high intensity pulsed ion beam10.4028/www.scientific.net/AMR.538-541.2377 ↗
13. Study of metal film/substrate mixing by intense pulsed ion beam10.1016/j.surfcoat.2006.07.028 ↗
14. Preparation of thin films and nanosize powders by intense, pulsed ion beam evaporation10.1143/JJAP.36.4928 ↗
15. The thermodynamical process in metal surface due to the irradiation of intense pulsed ion beam
16. Detection of shocks generated by intense pulsed ion beam irradiation10.1016/j.surfcoat.2006.07.201 ↗
17. Ion processing of alumina ceramics by high-power pulsed beams10.1016/j.nimb.2018.08.037 ↗
18. Damage of Al2O3 ceramics under the action of pulsed ion and plasma fluxes and laser irradiation10.1134/S2075113316030151 ↗
19. Transition alumina phases induced by heat treatment of boehmite: an X-ray diffraction and infrared spectroscopy study10.1016/j.jssc.2009.02.006 ↗
20. Metastable Alumina polymorphs: crystal structures and transition sequences
21. Phase transformations in face centered cubic (Al 0.32Cr 0.68) 2O 3 thin films10.1016/j.surfcoat.2012.01.008 ↗
22. Ab initio study of the physical properties of γ -Al2 O3: lattice dynamics, bulk properties, electronic structure, bonding, optical properties, and ELNES/XANES spectra10.1103/PhysRevB.78.014106 ↗
23. γ-alumina as a support for catalysts: a review of fundamental aspects10.1002/ejic.200500348 ↗
24. Theoretical study of the dehydration process of boehmite to γ-alumina10.1021/jp0038310 ↗
25. Size-dependent catalytic activity of supported metal clusters10.1038/372346a0 ↗
26. Dopants adsorbed as single atoms prevent degradation of catalysts10.1038/nmat1077 ↗
27. Coordination and interface analysis of atomic-layer-deposition Al2O3 on Si(001) using energy-loss near-edge structures10.1063/1.1629397 ↗
28. Topotaxial phase transition induced by ion bombardment in gl-a120310.1080/09500838908206340 ↗
29. Corundum-to-spinel structural phase transformation in alumina10.1016/j.nimb.2015.06.005 ↗
30. Morphology and microstructure of the Ar+-ion sputtered (0001) α-Al2O3 surface10.1016/S0169-4332(00)00376-7 ↗
31. James Ziegler - Srim
32. Ion beam induced epitaxial crystallization of α-Al2O 3 at room temperature10.1016/j.nimb.2013.12.012 ↗
33. Defect production in ceramics10.1016/S0022-3115(97)00224-9 ↗
34. Characterization and analysis of infrared imaging diagnostics for intense pulsed ion and electron beams10.1016/j.vacuum.2014.12.003 ↗
35. γ-Al2O3 formation from pulsed-laser irradiated sapphire10.1063/1.112960 ↗
36. Determination of the structure of γ-alumina from interatomic potential and first-principles calculations: the requirement of significant numbers of nonspinel positions to achieve an accurate structural model10.1103/PhysRevB.71.224115 ↗
37. α- to γ-Al2O3 martensitic transformation induced by pulsed laser irradiation10.1016/j.actamat.2010.03.045 ↗
38. Investigation of phase composition and nanoscale microstructure of high-energy ball-milled MgCu sample10.1186/1556-276X-7-390 ↗
39. N.V. Myung, J. Lim, J. Rohan, Electrochemical synthesis of nanoengineered materials and their applications, (n.d.). https://doi.org/10.3389/978-2-88963-192-6.10.3389/978-2-88963-192-6 ↗
40. Effects of stress wave in metal induced by intense pulsed ion beam
41. Surface exfoliation analysis on single-crystal silicon under compressed plasma flow action, Laser Part
42. Fracture analysis of surface exfoliation on single crystal silicon irradiated by intense pulsed ion beam10.1016/j.nimb.2017.09.031 ↗
43. Thermo-hydrodynamic process simulation of craters formation and evolution on metal surfaces caused by intense pulsed ion beams10.1016/j.vacuum.2015.06.028 ↗
44. The influence of metal surface topography on ablation behavior during intense pulsed ion beam irradiation10.1016/j.surfcoat.2020.125599 ↗
45. Charging effects on SEM/SIM contrast of metal/insulator system in various metallic coating conditions10.2320/matertrans.M2010034 ↗