journal article·2021-01

Construction and simulation of novel asymmetrical scroll wraps for scroll vacuum pumps

Jun Wang, Lining Dong, Zhoujin XI, Chenyan Cao, Zengli Wang

Vacuum· Volume 183
Publisher page

Abstract

Abstract The existing asynchronous suction scroll vacuum pump with only one suction port has higher area utilization ratio than that of the existing synchronous suction scroll vacuum pump with two suction ports, but its built-in volume ratios of two groups of working chambers are not equal, which leads to the gas mixing at different pressures at the end of the compression process, and creates irreversible losses. In order to solve this problem, an asymmetrical twin-circular arc modified method was proposed in this study; and then a new type of asymmetrical twin-circular arc modified wrap (ACMW) with only one suction port, whose built-in volume ratios of two groups of working chambers are equal, was constructed. In addition, influences of its geometric parameters on the working performance of the scroll vacuum pump were studied, and 3D numerical simulations of its working process were conducted and compared. The study results demonstrate that wrap of the proposed orbiting scroll becomes thicker while wrap of the proposed fixed scroll is gradually thinner, as offset distance δ increases. The novel ACMW will play an important role in improving the working performance of the scroll vacuum pumps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Refrigeration and Air Conditioning Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Rotating scroll vacuum pump
2. On the profile design of a scroll compressor10.1016/0140-7007(95)00013-2 ↗
3. Variable wall thickness scroll geometry modeling with use of a control volume approach[J]10.1016/j.ijrefrig.2013.08.003 ↗
4. Update on scroll compressor chamber geometry[C]
5. Suefuji · 1990
6. Park Inwon, Choi Seheon, Lee Byeongchul, Yoo Byungkil. Scroll Compressor [P], US Patent: US 2014/0363325 A1, 2014-12-11..
7. Parametric representation of scroll geometry with variable wall thickness
8. Qiao · 1994
9. Park Inwon, Choi Seheon, Lee Byeongchul, et al. Scroll compressor with an arcuate and a logarithmic spiral sections[P]. US Patent: US 9605675 B2, 2017-03-28..
10. Choi Se heon, et al. Asymmetrical Scroll Compressor[P], US Patent: US 2001/0006604 A1, 2001-5-7..
11. The Development of Parametric Design System for Oil-free Scroll Vacuum Pump. Order No. 10467878
12. Parameter Modeling and Temperature Field Analyzing of the Oil-free Scroll Vacuum Pump. Order No. 10447901
13. Ryusuke Muto, et al. SCROLL VACUUM PUMP[P], US Patent: US 0069553330 B1, 2005-10-11..
14. Geometric modeling and analysis of a novel modified wrap for scroll compressors10.1016/j.ijrefrig.2019.02.027 ↗
15. Design methodology and geometric modeling of complete meshing profiles for scroll compressors [J]10.1016/j.ijrefrig.2018.05.011 ↗
16. Novel structured dynamic mesh generation for CFD analysis of scroll vacuum pumps[J]10.1177/0957650915601927 ↗