Effect of sequential isochronal annealing on the structure and migration behaviour of selenium-ion implanted in glassy carbon
Source abstract
Abstract
Abstract In a view to further study the diffusion properties of glassy carbon for its applicability as a diffusion barrier for fission products found in high-level nuclear waste, glassy carbon samples were implanted with 150 keV Se ions to a fluence of 1 × 1016 ion/cm2 at room temperature. Some of the implanted samples were subjected to sequential isochronal annealing at two temperature regimes (300–700 °C and 1000–1200 °C) for 5 h under vacuum. Raman spectroscopy was used to investigate the structural changes while Rutherford backscattering spectrometry (RBS) was used to monitor the migration of implanted Se. Implantation of Se amorphized glassy carbon resulting in an increase in density (from 1.42 to 2.1 gcm−3). No notable diffusion of Se in the glassy carbon occurred after annealing at the low-temperature regime (300–700 °C). Raman spectroscopy shows that limited recrystallization occurred after annealing at the low-temperature regime. Appreciable recrystallization coupled with some diffusion occurred at the high-temperature regime, 1000–1200 °C. The original structure of glassy carbon was not achieved after annealing at 1200 °C. Diffusion coefficients of 5.9 × 10−20 m2s−1 and 4.79 × 10−20 m2s−1 were obtained for Se in defective glassy carbon at 1000 and 1100 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Nuclear materials and radiation effects · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Ion bombardment of glassy carbon10.1016/j.vacuum.2017.11.006 ↗
2. Fullerene-related structure of commercial glassy carbons10.1080/14786430410001720363 ↗
3. Structural and surface changes in glassy carbon due to strontium implantation and heat treatment10.1016/j.jnucmat.2017.10.018 ↗
4. Use of glassy carbon as a working electrode in controlled potential coulometry10.1016/0039-9140(69)80204-3 ↗
5. Doped glassy carbon: a new material for electrocatalysis10.1039/jm9920200771 ↗
6. Glassy Carbon: a promising material for micro and nanomanufacturing10.3390/ma11101857 ↗
7. Method of moulding glass lenses
8. Glassy carbon: a potential dental implant Material10.1002/jbm.820070318 ↗
9. A comment on glassy carbon
10. A review of glasslike carbons
11. Hochtemperatur-werkstoffe GmbH
12. High-resolution electron microscopy studies of non- graphitizing carbons
13. Structural changes in industrial glassy carbon as a function of heat treatment temperature according to Raman spectroscopy and X-ray diffraction data
14. Migration kinetics of ion-implanted beryllium in glassy carbon10.1016/j.diamond.2008.06.002 ↗
15. Heat treatment of glassy carbon implanted with cesium at room and high temperatures10.1016/j.nimb.2011.07.041 ↗
16. In-situ RBS studies of strontium implanted glassy carbon10.1016/j.vacuum.2016.01.024 ↗
17. High temperature annealing studies of strontium ion implanted glassy carbon10.1016/j.nimb.2015.10.054 ↗
18. Structural modification of indium implanted glassy carbon by thermal annealing and SHI irradiation10.1016/j.vacuum.2017.07.020 ↗
19. Annealing effects on the migration of ion-implanted cadmium in glassy carbon10.1016/j.nimb.2017.01.086 ↗
20. Investigating the effect of heat treatment on the diffusion behaviour of xenon implanted in glassy carbon10.1016/j.vacuum.2017.12.021 ↗
21. Effect of heat treatment on the migration behaviour of Sr and Ag CO-implanted in glassy carbon10.1016/j.vacuum.2019.109027 ↗
22. Interface interaction of tungsten film deposited on glassy carbon under vacuum annealing10.1016/j.vacuum.2017.11.020 ↗
23. Evaluation of diffusion parameters and phase formation between tungsten films and glassy carbon10.1016/j.vacuum.2020.109245 ↗
24. Nichols · 2007 · 1
25. Selenium: radionuclides
26. Nuclear decay data for dosimetric calculations
27. Preparation of radiochemically pure 79Se and highly precise determination of its half-life10.1016/j.apradiso.2010.05.006 ↗
28. Selenium geochemistry and health10.1579/0044-7447(2007)36[94:SGAH]2.0.CO;2 ↗
29. Selenium in agriculture and the environment
30. Peterson · 2005 · 1
31. Hlatshwayo · 2010
32. SRIM - the stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
33. Estimation of the atomic density of amorphous carbon using ion implantation, SIMS and RBS10.1016/S0257-8972(02)00247-5 ↗
34. Threshold displacement energy and damage function in graphite from molecular dynamics10.1016/j.carbon.2015.11.040 ↗
35. Raman spectroscopic investigation of ion-beam-irradiated glassy carbon10.1063/1.346547 ↗
36. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
37. Evolution of glassy carbon under heat treatment: correlation structure–mechanical properties10.1007/s10853-017-1753-7 ↗
38. Studying disorder in graphite-based systems by Raman spectroscopy10.1039/B613962K ↗
39. Raman spectroscopy of graphene and graphite: disorder, electron-phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
40. Raman spectrum of graphite10.1063/1.1674108 ↗
41. Structural phenomena in glassy carbon induced by cobalt ion implantation10.1007/s00339-008-4615-y ↗
42. The growth of crystals and the equilibrium structure of their surfaces
43. The effect of annealing and implantation temperature on the structure of C ion ‐ beam ‐ irradiated glassy carbon10.1063/1.360054 ↗
44. Diffusion of a mono-energetic implanted species with a Gaussian profile10.1016/j.nimb.2017.04.067 ↗