journal article·2020-07

Properties of a rapidly solidified Ni–Nb layer prepared using a high-current pulsed electron beam

Pingping Sun, Conglin Zhang, Jie Cai, Peng Lyu, Yunxue Jin, Qingfeng Guan

Vacuum· Volume 177
Publisher page

Abstract

Abstract In this study, the surface of a bulk crystalline Ni–Nb powder metallurgy (PM) sample of a glass-forming composition was investigated using high-current pulsed electron-beam (HCPEB) irradiation, which also improved the surface properties. Unlike the original crystalline sample, X-ray diffraction (XRD) of the surface shows an amorphous phase following HCPEB exposure. Transmission electron microscopy (TEM) reveals that, after the Ni–Nb PM samples were exposed to 20 or 30 pulses of HCPEB irradiation, the re-melted layer contains localized nanocrystalline regions within an amorphous matrix. The scanning electron microscopy (SEM) results indicate that, after 30 pulses, a re-melted layer about 5 μm in thickness forms on the surface of the Ni–Nb PM samples. Meanwhile, a large number of cracks and craters were observed on the re-melted layer. In addition, the micro-hardness tests reveal that the micro-hardness improves significantly after HCPEB irradiation. The microhardness of the sample was the highest after the 30 pulses, which was 1.5 times that of the original sample. Furthermore, potentiodynamic polarization tests indicate that the irradiated samples of corrosion resistance were not enhanced compare to the initial samples, due to the formation of cracks providing a Cl− etching channel that accelerates the corrosion rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pulsed Power Technology Applications · Integrated Circuits and Semiconductor Failure Analysis · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Corrosion of glassy (Ni8Nb5)99.5Sb0.5 alloy and stability of passive film10.1016/S1875-5372(13)60045-4 ↗
2. Amorphization and nanocrystallization of Ni–Nb-Si alloys10.1016/j.msea.2016.11.041 ↗
3. Binary Ni-Nb bulk metallic glasses10.1063/1.2158130 ↗
4. Ni–Ta binary bulk metallic glasses10.1016/j.scriptamat.2010.03.044 ↗
5. Oxidation behaviour of Ni60Nb30Ta10 metallic glass below its glass transition temperature10.1016/j.jallcom.2017.09.040 ↗
6. New ternary Ni-Ta-Sn bulk metallic glasses10.1016/j.intermet.2006.01.042 ↗
7. The effect of Zr addition in glass forming ability of Ni-Nb alloy system
8. Bulk metallic glass formation in Ni-Zr-Nb-Al alloy systems10.1016/j.matlet.2003.07.026 ↗
9. Bulk glass formation in the Ni–Zr–Ti–Nb–Si–Sn alloy system10.1557/JMR.2004.0286 ↗
10. Structure relaxation effect on hardness and shear transformation zone volume of a Ni-Nb metallic glassy film10.1016/j.jnoncrysol.2018.07.050 ↗
11. Deposition of HVAF-sprayed Ni- based amorphous metallic coatings
12. Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy10.1016/j.apsusc.2013.10.140 ↗
13. Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation10.1016/j.apsusc.2013.05.005 ↗
14. Synthesis of amorphous alloys and amorphous-crystalline composites in ternary Ni-Nb-Zr system by ion beam mixing10.1016/j.matchemphys.2013.06.032 ↗
15. Metallic glass formation in the ternary Ni-Nb-Mo system by ion beam mixing
16. Modication of single crystal stainless steel structure (Fe-Cr-Ni-Mn) by high-power ion beam10.1016/S0042-207X(01)00225-1 ↗
17. Surface nanostructure and amorphous state of a low carbon steel induced by high-current pulsed electron beam10.1016/j.surfcoat.2004.08.104 ↗
18. Enhanced corrosion property of W-Al coatings fabricated on aluminum using surface alloying under high-current pulsed electron beam10.1016/j.jallcom.2017.06.189 ↗
19. Composition formulas of Ni-(Nb, Ta) bulk metallic glasses10.1016/j.intermet.2017.02.019 ↗
20. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
21. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
22. Bowie · 1933
23. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
24. Plastic strain-induced grain refinement at the nanometer scale in copper10.1016/j.actamat.2006.07.013 ↗
25. Microstructures and properties of zirconium-702 irradiated by high-current pulsed electron beam10.1016/j.nimb.2015.06.020 ↗
26. Temperature profile and crater formation induced in high-current pulsed electron beam processing10.1116/1.1619417 ↗
27. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗
28. The properties of self-formed diffusion barrier layer in Cu(Cr) alloy10.1016/j.vacuum.2016.01.019 ↗
29. Interpretation of Ni2p XPS spectra of Ni conductors and Ni insulators10.1007/s002690050265 ↗
30. Wanger · 1979
31. XPS study of Nb-doped oxygen sensing TiO2 thin films prepared by sol-gel method10.1016/S0040-6090(98)00534-3 ↗
32. Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam10.1016/j.vacuum.2012.03.061 ↗
33. The microstructure and properties of Cr alloying layer after surface alloying treatment induced by high current pulsed electron beam10.1016/j.jallcom.2017.04.014 ↗
34. Shear Sliding-off fracture of bulk amorphous Zr-Based alloys containing nanoscale compound particles10.2320/matertrans1989.40.1376 ↗
35. High-strength Zr-based bulk amorphous alloys containing nanocrystalline and nanoquasicrystalline particles10.1016/S1468-6996(00)00009-7 ↗
36. Plastic deformation in nanostructured bulk glass composites during nanoindentation10.1016/j.intermet.2008.09.005 ↗
37. Effect of microstructure on the hardness and dry Sliding behavior of electroless Ni-B Coating10.1016/j.mtla.2018.09.004 ↗
38. Effect of heat treatment on the characteristics of electroless Ni-B, Ni-B-W and Ni-B-Mo coatings, mate