journal article·2020-06

XPS measurements of air-exposed Cd(Zn)1xFexTe1ySey surfaces revisited

M. Medić Ilić, N. Bundaleski, N. Ivanović, O.M.N.D. Teodoro, Z. Rakočević, D. Minić, N. Romčević, I. Radisavljević

Vacuum· Volume 176
Publisher page

Abstract

Abstract Recently introduced model for quantitative analysis of in-depth non-uniform surfaces is applied to reexamine the X-ray Photoelectron Spectroscopy (XPS) data of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 crystalline samples. Special attention is paid to the precise identification of phases which form the bulk-like near-surface region and the surface overlayers (the oxide layer and the layer of organic impurities), as well as the influence of surface morphology on the measurements. The obtained results fully support earlier qualitative estimations, but also provide new quantitative insight into the composition of the three investigated regions. The near-surface region of Cd0.99Fe0.01Te0.97Se0.03 and Zn0.98Fe0.02Te0.91Se0.09 samples is slightly electropositive, with cation/anion ratio 52:48 and 53:47, respectively. Model surface structures, which are fully compatible with the experimental results, comprise 0.76 nm thick CdTeO3 layer at the surface of Cd0.99Fe0.01Te0.97Se0.03 and 0.33 nm thick mixed ZnO/TeO2 oxide layer on Zn0.98Fe0.02Te0.91Se0.09. In both samples the oxide layer is only a few atomic layers thick, implying that it suppresses further rapid migration of oxygen into the bulk.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Electronic and Structural Properties of Oxides · Surface and Thin Film Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Watts · 2003
2. Dynamics of native oxide growth on CdTe and CdZnTe X-ray and gamma-ray detectors10.1080/14686996.2016.1250105 ↗
3. Improvement to thin film CdTe solar cells with controlled back surface oxidation10.1016/j.solmat.2014.10.044 ↗
4. Study of the x-ray photoelectron spectrum of tungsten-tungsten oxide as a function of thickness of the surface oxide layer10.1016/0368-2048(72)80029-X ↗
5. Surface analysis and angular distributions in x-ray photoelectron spectroscopy10.1016/0368-2048(74)90001-2 ↗
6. An ESCA method for determining the oxide thickness on aluminium alloys10.1002/sia.740150109 ↗
7. Quantification of oxide film thickness at the surface of aluminium using XPS10.1002/sia.1344 ↗
8. A consistent method for quantitative XPS peak analysis of thin oxide films on clean polycrystalline iron surfaces10.1016/S0169-4332(97)00167-0 ↗
9. Ultrathin SiO2 on Si II. Issues in quantification of the oxide thickness10.1002/sia.1433 ↗
10. Overlayer thickness determination by XPS using the multiline approach10.1002/sia.3005 ↗
11. An XPS study of the surfaces on Fe-Cr, Fe-Co and Fe-Ni alloys after mechanical polishing10.1016/0010-938X(84)90039-8 ↗
12. XPS analytical characterization of amorphous alloys: Fe70Cr10P13C710.1002/sia.740151106 ↗
13. XPS analysis of passive films on the amorphous alloy Fe70Cr10Pl3C7: effect of the applied potential10.1002/sia.740180708 ↗
14. Multilayer approach to the quantitative analysis of X-ray photoelectron spectroscopy results: applications to ultrathin SiO2 on Si and to self-assembled monolayers on gold10.1116/1.2008274 ↗
15. Angle-resolved XPS and AES: depth-resolution limits and a general comparison of properties of depth-profile reconstruction methods10.1016/0368-2048(94)02270-4 ↗
16. Simulation of electron spectra for surface analysis (SESSA): a novel software tool for quantitative Auger-electron spectroscopy and X-ray photoelectron spectroscopy10.1002/sia.2097 ↗
17. XPS MultiQuant: multimodel XPS quantification software10.1002/sia.1775 ↗
18. Calculation of layer thickness on rough surfaces by polyhedral model10.1002/sia.2751 ↗
19. Calculation of layer thickness on nanotube surfaces from XPS intensity data10.1002/sia.4864 ↗
20. Improved ARXPS data interpretation using near-surface measuring angles10.1002/sia.4863 ↗
21. Non-destructive determination of ultra-thin GaN cap layer thickness in AlGaN/GaN HEMT structure by angle resolved X-ray photoelectron spectroscopy (ARXPS)10.1063/1.5011801 ↗
22. Local, electronic and surface structure of multi-component Fe-doped CdTe(S) systems10.1016/j.susc.2018.11.007 ↗
23. Local structures in Pb1−xMnxTe systems10.1002/xrs.955 ↗
24. XAFS studies of nickel-doped lead telluride10.1016/j.physb.2009.08.209 ↗
25. Structural aspects of changes induced in PbTe by doping with Mn, in and Ga10.1007/s10853-013-7621-1 ↗
26. Structural stability and local electronic properties of some EC synthesized magnetite nanopowders10.1016/j.jallcom.2016.11.090 ↗
27. Comprehensive studies of structural, electronic and magnetic properties of Zn0.95Co0.05O nanopowders10.1016/j.materresbull.2015.10.014 ↗
28. Electronic aspects of formation and properties of local structures around Mn in Cd1−xMnxTe1−ySey10.1016/j.matchemphys.2015.10.038 ↗
29. Survey of electronic properties and local structures around Fe in selected multinary chalcogenides10.1016/j.jallcom.2018.12.167 ↗
30. XAFS and XPS analysis of Zn0.98Fe0.02Te0.91Se0.09 semiconductor10.1016/j.jallcom.2015.01.169 ↗
31. Surface composition of Cd1-xFe(Mn)xTe1-ySey systems exposed to air10.1016/j.matchemphys.2016.12.029 ↗
32. Powell · 2011
33. Calculations of electron inelastic mean free paths, V. Data for 14 organic compounds over the 50-2000 eV range10.1002/sia.740210302 ↗
34. Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV10.1016/0368-2048(76)80015-1 ↗
35. Atomic subshell photoionization cross sections and asymmetry parameters: 1 ≤ Z ≤ 10310.1016/0092-640X(85)90016-6 ↗
36. Multitechnique surface analysis system: apparatus description10.1016/0042-207X(95)00142-5 ↗
37. Naumkin
38. SRIM – the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
39. C 1s peak of adventitious carbon aligns to the vacuum level: dire consequences for material's bonding assignment by photoelectron spectroscopy10.1002/cphc.201700126 ↗
40. Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample work function referencing to adventitious carbon: resolving the myth of apparent constant binding energy of the C 1s peak10.1016/j.apsusc.2018.04.226 ↗
41. X-Ray photoelectron spectroscopy study of CdTe oxide films grown by rf sputtering with an Ar - NH3 plasma10.1016/S0257-8972(02)00028-2 ↗
42. Moulder · 1992
43. X-ray photoelectron spectroscopy of CdSe nanocrystals with applications to studies of the nanocrystal surface10.1021/j100066a034 ↗
44. Beamson · 1992
45. “Surface states on the Cd1−xFex Te surfaces10.1016/S0042-207X(01)00194-4 ↗
46. Error sources in atomic force microscopy for dimensional measurements: taxonomy and modelling
47. Quantitative AES. VIII: analysis of auger electron intensities from elemental data in a digital auger database10.1002/(SICI)1096-9918(199811)26:12<908::AID-SIA438>3.0.CO;2-H ↗
48. Native oxide formation on CdTe10.1116/1.584278 ↗
49. X-ray structural phase analysis of CdTe semiconductor annealed in air10.1002/crat.200310061 ↗
50. Thermodynamic properties of the native oxide-Hg1-xZnxTe interface10.1088/0268-1242/9/12/015 ↗
51. Batchelor · 2010
52. Diffusion in semiconductors