Optical properties and thermal stability of Ag/TiAlONM/TiAlOND/AlON spectral selective coating
Source abstract
Abstract
Abstract A new spectral selective coating using Ag as metal reflector has been optimized based on the optical properties of TiAlON and AlON single layer. The absorptance is 95.32% and the emittance is 9.65% at 550 °C calculated by integrating spectral reflectance in the spectral region of 2.5–25 μm wavelength. The microstructure and thermal stability of Ag/TiAlONM/TiAlOND/AlON spectral selective coating was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and high-resolution transmission electron microscopy (HRTEM), respectively. It shows that the thickness of TiAlONM, TiAlOND, and AlON layer is 68 nm, 27 nm and 35 nm, respectively. The solar absorptance has reduced by 2.9% and the thermal emittance has increased by 3.2% after annealed at 600 °C for 168 h. TiAlON which is stable up to 700 °C in vacuum, could act as a barrier layer for inhabiting diffusion of Ag element into absorb layer. Unlike the single layer, spectral selective coating gets crystallized after annealed, which is attributed to the internal stress of the coating. Thus, Ag/TiAlONM/TiAlOND/AlON spectral selective coating can be excellent candidate for high temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Thermal Radiation and Cooling Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Kennedy · 2002
2. Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering10.1116/1.2699425 ↗
3. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
4. Effects of substrates, film thickness and temperature on thermal emittance of Mo/substrate deposited by magnetron sputtering10.1016/j.vacuum.2016.03.008 ↗
5. Infrared reflectance and emittance of silver and gold evaporated in ultrahigh vacuum10.1364/AO.4.000221 ↗
6. Infrared reflectance of Aluminum evaporated in ultra-high vacuum10.1364/JOSA.53.001089 ↗
7. Adhesion and structural stability enhancement for Ag layers deposited on steel in selective solar coating technology10.1016/j.surfcoat.2014.02.045 ↗
8. Optimization procedure and fabrication of highly efficient and thermally stable solar coating for receiver operating at high temperature10.1016/j.solmat.2016.06.047 ↗
9. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
10. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectirc coatings: a critical revie10.1016/j.rser.2017.05.062 ↗
11. Spectral properties and thermal stability of solar selective absorbing AlNi-Al2O3 cermet coating10.1016/j.solener.2013.07.012 ↗
12. Enhanced thermal stability of W-Ni-Al2O3 cermet-based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
13. High-temperature tolerance in WTi-Al2O3 cermet-based solar selective absorbing coatings with low thermal emissivity10.1016/j.nanoen.2017.05.036 ↗
14. Silver nanoparticles with an armor layer embedded in the alumina matrix to form nanocermet thin films with sound thermal stability [J]10.1021/am502254s ↗
15. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
16. Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications10.1016/j.solmat.2011.01.006 ↗
17. Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications10.1016/j.apsusc.2007.07.109 ↗
18. Silica-carbon nanocomposites: a new concept for the design of solar absorbers10.1002/1616-3028(200203)12:3<197::AID-ADFM197>3.0.CO;2-A ↗
19. A novel design in composites of various materials for solar selective coatings10.1016/S0927-0248(01)00108-8 ↗
20. 2003
21. 2010
22. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
23. Silver diffusion and high-temperature lubrication mechanisms of YSZ–Ag–Mo based nanocomposite coatings10.1016/j.compscitech.2006.09.008 ↗
24. Microstructure and mechanical properties of (Al, Ti)(O, N) coatings prepared by reactive sputtering10.1016/j.ijrmhm.2006.07.003 ↗
25. Thermal stability test and ageing mechanisms study of different solar selective absorbing coatings10.1016/j.surfcoat.2016.08.092 ↗