Prediction of the compression ratio of a Holweck-type molecular pump with the presence of multi-component gases using a modified Sickafus method for high-speed rotors
Source abstract
Abstract
Abstract Analyzing behavior inside a gas centrifuge machine can be divided into two parts: modeling and simulating spaces inside and outside of a rotor. Examining the mass percentage of the gas used in the Holweck-type pump is essential in approaching the desired compression ratio. Due to the contact between outside and inside spaces of a rotor with each other, after flow equilibrium, it is possible to predict the gas components outside the rotor by examining the concentration of gas components at the axis of the rotor. For this purpose, Multi Component Concentration-Direct Simulation Monte Carlo (MCC-DSMC) solver has been developed in this paper. By this solver, variations in concentration inside a rotor for a different combination of light gas with heavy gases were examined. Based on the mass percentages of the components formed in the rotor axis, the gas was selected to simulate the Holweck-type molecular pump by the modified Sickafus method in different geometries. The results show that the compression ratios of the modified Sickafus method are in good agreement with the experimental results. Also, the presence of small percentages of a light gas inside the rotor has a significant influence on the compression ratio made by a molecular pump.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Dynamics and Kinetic Theory · Rocket and propulsion systems research · Phase Equilibria and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Onsager's pancake approximation for the fluid dynamics of a gas centrifuge
2. Cohen · 1951 · 103
3. Centrifugation10.1007/3-540-09385-0_18 ↗
4. A convergence proof for Bird's direct simulation Monte Carlo method for the Boltzmann equation10.1007/BF01055714 ↗
5. Bird · 1994 · vols. 2–45 · 218
6. Direct Monte-Carlo simulations in a gas centrifuge
7. Gas mixing in micro channels using the direct simulation Monte Carlo methods10.1016/j.ijheatmasstransfer.2005.10.022 ↗
8. Rarefied gas flow modeling inside rotating circular cylinder10.3844/ajeassp.2008.62.65 ↗
9. Bird · 2013 · 208
10. The generalized Onsager model for the secondary flow in a high-speed rotating cylinder10.1017/jfm.2011.289 ↗
11. The generalized Onsager model and DSMC simulations of high-speed rotating flow in a multiply connected domain
12. Modeling gas-granular flow in molecular using the DSMC method and continuum regions by Onsager's pancake equation with mass sources and sinks in a rotating cylinder10.1007/s10035-019-0920-8 ↗
13. Holweck · Compt.Rend. · 1923 · 177 · 43
14. Free molecular flow in the Holweck pump10.1063/1.1407654 ↗
15. Flow of a rarefied gas in a rectangular channel with a moving plate10.1252/kakoronbunshu.18.911 ↗
16. Geometric study and simulation of an elliptical rotor profile for Roots vacuum pumps10.1016/j.vacuum.2018.04.014 ↗
17. The influence of blade outlet angle on the performance of centrifugal pump with high specific speed10.1016/j.vacuum.2018.10.049 ↗
18. Design characteristics of molecular drag pumps10.1016/S0042-207X(00)00374-2 ↗
19. The effect of startup modes on a vacuum cam pump10.1016/j.vacuum.2019.05.009 ↗
20. Pumping mechanism of helical grooved molecular drag pumps10.1116/1.581728 ↗
21. Sickafus · 1961 · 1
22. BIOVIA\Materials Studio 17.1\share\doc\content\pdfs\ utorials_modules.htm.
23. Multi-isotope separation in a gas centrifuge using Onsager's pancake model10.1080/01496399608006946 ↗
24. Determination of momentum accommodation coefficients and velocity distribution function for noble gas-polymeric surface interactions using molecular dynamics simulation10.1016/j.apsusc.2019.07.033 ↗