Numerical simulation and design methodology of a novel asymmetric cylinder profile for sliding vane vacuum pumps
Source abstract
Abstract
Abstract Large built-in volumetric ratio is the major obstacle to improve the extraction performance of vacuum pumps. In order to achieve larger built-in volumetric ratio of the sliding vane vacuum pump (SVVP), a novel kind of asymmetric cylinder profile, called quadratic spiral, was proposed in this study. A mathematical model of the asymmetric cylinder profile and its general design methodology were presented. Moreover, the whole geometric structures of asymmetric SVVPs with single-chamber, double-chamber, and three-chamber were designed according to the proposed design methodology. Also, the comparisons between asymmetric SVVPs and symmetric SVVPs were conducted in terms of the suction and discharge volumes, and built-in volumetric ratio. The results indicated that the larger built-in volumetric ratio was realized by reducing discharge volume with the suction volume keeping constant. Numerical simulations of internal gas flows of the asymmetric SVVPs and symmetric SVVPs were carried out to compare their working characteristics. The study results showed that the asymmetric SVVPs has better working performance in terms of variational trends of pressure, smaller pressure fluctuation and energy saving.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Refrigeration and Air Conditioning Technologies · Advanced Thermodynamic Systems and Engines · Hydraulic and Pneumatic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Wrap of cylinder and its effect on main features of rotary vane compressor for automobile air conditioning system10.1016/S0140-7007(02)00148-2 ↗
2. A new cylinder profile of double-action sliding vane compressor and its three dimensional model based on SolidWorks
3. Design and analysis of a sliding vane pump for waste heat to power conversion systems using organic fluids10.1016/j.applthermaleng.2017.06.083 ↗
4. Development of a sliding vane rotary pump for engine cooling10.1016/j.egypro.2015.12.083 ↗
5. Development of an internal air cooling sprayed oil injection technique for the energy saving in sliding vane rotary compressors through theoretical and experimental methodologies10.1016/j.ijrefrig.2014.12.020 ↗
6. Theoretical modeling and experimental investigations for the improvement of the mechanical efficiency in sliding vane rotary compressors10.1016/j.apenergy.2014.12.055 ↗
7. Modeling of rotary vane compressor applying artificial neural network
8. Performance evaluation of a novel dual vane rotary compressor
9. Theoretical modeling of sliding vane compressor with leakage10.1016/j.ijrefrig.2009.07.005 ↗
10. Performance investigation of a novel expander coupling organic Rankine cycle: variable expansion ratio rotary vane expander for variable working conditions10.1016/j.applthermaleng.2019.02.103 ↗
11. A study of the complete dynamic balance of the rotor inertial forces in the rotary piston vacuum pump10.1016/S0042-207X(98)00188-2 ↗
12. Influence of the first stage on the final pressure in a two-stage rotary pump10.1016/0042-207X(92)90110-I ↗
13. Study on the driving torque and target pressure time of a rotary vane pump for brake booster10.1007/s12206-017-1129-6 ↗
14. A study on the development of a numerical model for a rotary vane vacuum pump for brake boosters10.1007/s12206-018-0720-9 ↗
15. Compressor efficiency with cylinder slenderness ratio of rotary compressor at various compression ratios10.1016/j.ijrefrig.2016.06.020 ↗
16. Dual intake rotary vane expander technology: experimental and theoretical assessment10.1016/j.enconman.2019.02.026 ↗
17. Experimental investigation on the internal working process of a CO2 rotary vane expander
18. Experimental study of an improved air-source heat pump system with a novel three-cylinder two-stage variable volume ratio rotary compressor
19. Experimental study on a sliding vane expander in the HFC410A refrigeration system for energy recovery10.1016/j.applthermaleng.2013.05.050 ↗
20. Deforming grid generation for numerical simulations of fluid dynamics in sliding vane rotary machines10.1016/j.advengsoft.2017.05.010 ↗
21. Grid generation methodology and CFD simulations in sliding vane compressors and expanders
22. Numerical CFD simulations on a small-scale ORC expander using a customized grid generation methodology10.1016/j.egypro.2017.09.199 ↗
23. CFD simulation on cavitation in a rotary vane energy recovery device10.1016/j.egypro.2019.01.720 ↗
24. Lumped parameter and three-dimensional computational fluid dynamics simulation of a variable displacement vane pump for engine lubrication10.1115/1.4038761 ↗