journal article·2019-11

Microproperties and interface behavior of the BAg25TS brazed joint

Liangliang Zhang, Hua Yu, Jia Ma, Sujuan Zhong, Yongtao Jiu, Shizhong Wei, Weimin Long, Alex A. Volinsky

Vacuum· Volume 169
Publisher page

Abstract

Abstract A joint with a Q235A steel Bundy tube as the base metal induction brazed with a new type of BAg25TS flux-cored solder, and a butt joint and lap brazing test were carried out. The temperature range of the solid-liquid phase line of the brazed joint, wettability on the base metal, microstructure, element distribution and diffusion of the joint, and mechanical properties of the joint were studied using a differential scanning calorimeter, thermal balance, field emission scanning electron microscope, energy dispersive spectroscopy, tensile testing and microhardness measurements. The solid-liquid line range of the flux-core solder is 775.7–801.4 °C and the spread area of the solder on the base metal is the largest at 850 °C. Additionally, the joint brazed with this flux-core solder has no microcracks, and a secondary phase appears, which is mainly composed of an interface Cu-rich and Ag-rich phases. The Ag element in the joint is distributed along the grain boundaries through intergranular infiltration of the Fe. Furthermore, the pinning effect optimizes the tensile and shear strength of the joint, and the fracture surface of the joint indicates a ductile fracture. In addition, the microhardness of the brazed joint is high on the left side, while it is low on the right side due to the difference in the element distribution between the interfaces of the Cu-rich phase. Remarkably, the inhomogeneous distribution was caused by the different degree of undercooling between the two sides of the joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Effect of gallium addition on microstructure and properties of Ag-Cu-Zn-Sn alloys
2. Corrosion behaviors of 316LN stainless steel joints brazed with Sn-plated silver filler metals10.1142/S0217979218501989 ↗
3. Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding10.1016/j.ijhydene.2017.07.225 ↗
4. Microstructural evolution and thermal stress relaxation of Al 2 O 3/1Cr18Ni9Ti brazed joints with nickel foam
5. Research on the corrosion resistance of Cu-Al joints brazed with flux-cored Zn-2Al filler metal10.1088/2053-1591/ab057c ↗
6. Effects of brazing temperature on microstructure and properties of interface between cBN and Co-based active filler metals10.1016/j.vacuum.2017.08.021 ↗
7. Development of Ag based brazing filler metal with low melting point10.1179/1362171811Y.0000000037 ↗
8. Effect of silver content on microstructure and properties of brass/steel induction brazing joint using Ag-Cu-Zn-Sn filler metal10.1016/S1005-0302(11)60077-7 ↗
9. Microstructure, residual stress and mechanical properties of Al2O3/Nb joints vacuum-brazed with two Ag-based active fillers10.1016/j.vacuum.2018.09.028 ↗
10. Study on novel Ag-Cu-Zn-Sn brazing filler metal bearing Ga10.1016/j.jallcom.2016.07.255 ↗
11. Development of Ag-Cu-Zn-Sn brazing filler metals with a 10 weight-% reduction of silver and same liquidus temperature
12. Interdiffusion and microstructure evolution during brazing of austenitic martensitic stainless steel and aluminum-bronze with Ag-Cu-Zn based brazing filler material10.1016/j.jallcom.2018.01.043 ↗
13. Graphene-enhanced Cu composite interlayer for contact reaction brazing aluminum alloy 606110.1016/j.vacuum.2016.11.032 ↗
14. Characteristics and properties of Bi-11Ag solder10.1108/09540911311309022 ↗
15. Study on novel Ag-Cu-Zn-Sn brazing filler metal bearing Ga10.1016/j.jallcom.2016.07.255 ↗
16. Butt laser welding-brazing of AZ31Mg alloy to Cu coated Ti-6AL-4V with AZ92 Mg based filler10.1016/j.optlastec.2019.04.024 ↗
17. Experimental investigation of microstructure and phase transitions in Ag-Cu-Zn brazing alloys10.1007/s11665-018-3258-1 ↗
18. Development of low silver AgCuZnSn filler metal for Cu/steel dissimilar metal joining10.3390/met9020198 ↗
19. Beyond atomic sizes and hume-rothery rules: understanding and predicting high-entropy alloys
20. Study on microstructure and property of brazed joint of AgCuZn-x(Ga, Sn, in, Ni) brazing alloy10.1016/S1875-5372(10)60087-2 ↗
21. Comparison of allergen-specific IgE levels between Immulite 2000 and ImmunoCAP systems against six inhalant allergens and ten food allergens
22. Thermal fatigue damage and residual mechanical properties of W-Cu/Ag-Cu/1Cr18Ni9 brazed joint10.1016/j.jallcom.2018.01.151 ↗
23. Effect of Ce addition on the microstructure and properties of Ag17CuZnSn filler metal10.1007/s11665-017-2761-0 ↗
24. Brazing of CBN grains with Ag-Cu-Ti/TiX composite filler—Part I: effect of TiX particles on microstructure and strength of bonding layer10.1016/j.matdes.2016.03.033 ↗