journal article·2019-10

The intermetallic formation in the extruded AlSi20/8009 aluminum alloy during annealing treatment

Haibin Liu, Hui Zhang, Fulin Jiang, Dingfa Fu

Vacuum· Volume 168
Publisher page

Abstract

Abstract In order to evaluate the role of external Si addition in the intermetallic formation of 8009 aluminum alloy, the mixed powders of AlSi20 alloy and rapidly solidified 8009 aluminum alloy were extruded and annealed under various annealing conditions. The employed characterization techniques included scanning electron microscope, energy dispersive spectroscopy, X-ray diffraction and transmission electron microscope. The results showed that the formation of Al4.5FeSi phase was enhanced while the contents of Al12(Fe, V)3Si dispersion in 8009 aluminum alloy matrix and Si phase were decreased in the annealed AlSi20/8009 aluminum alloy with increasing annealing temperature (480 °C–540 °C) and annealing time (15 min–60 min at 540 °C). A novel nano-sized phase containing 5.58–6.98Al, 64.14–66.89Si, 25.59–26.20V and 1.91–2.65Fe (at. %) was observed at annealing temperature of 540 °C, which occupied a slice stacking morphology and had many sharp edges and corners. By comparing with the annealed 8009 aluminum alloys, the external Si addition was found to be responsible for the formation of Al4.5FeSi and the nano-sized phases in the annealed AlSi20/8009 aluminum alloys. The intermetallic formation mechanism and the role of external Si addition were also discussed based on experimental observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Ambient temperature mechanical properties of Al-8.5Fe-1.3V-1.7Si/SiCp composite10.1016/j.msea.2007.02.105 ↗
2. Effect of melt spinning variables on the structure and properties of a dispersion strengthened Al-Fe-V-Si alloy10.1016/0956-716X(95)00117-E ↗
3. Preparation of Al-Fe-V-Si alloy by spray co-deposition with added its over-sprayed powders10.1016/j.jallcom.2006.08.233 ↗
4. High temperature deformation behavior and mechanism of spray deposited Al-Fe-V-Si alloy10.1016/S1003-6326(07)60245-3 ↗
5. High temperature deformation behaviour of Al-Fe-V-Si alloys10.1179/mst.1998.14.4.322 ↗
6. Dispersion strengthened Al-Fe-V-Si alloys10.1016/0036-9748(86)90456-4 ↗
7. Microstructure and mechanical properties of Al-Fe-V-Si aluminum alloy produced by electron beam melting10.1016/j.msea.2016.02.053 ↗
8. Characterization of inertia-friction welds in a high-temperature RSPM Al-8.5Fe-1.3V-1.7Si alloy (AA8009)10.1016/1044-5803(91)90046-7 ↗
9. Hot workability of PM 8009Al/Al2O3 particle-reinforced composite characterized using processing maps10.1016/j.vacuum.2018.01.001 ↗
10. Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy10.1016/j.jnoncrysol.2003.11.007 ↗
11. An investigation on the microstructure and mechanical properties of spray-deposited Al-8.5Fe-1.1V-1.9Si alloy10.1016/j.jmatprotec.2006.10.033 ↗
12. Dry sliding wear behaviour of Al-Fe-Si-V alloys at elevated temperatures10.1016/j.wear.2014.10.016 ↗
13. Texture stability of a rapidly solidified dispersion strengthened Al-Fe-V-Si material10.1016/S1359-6462(98)00039-6 ↗
14. Thermostability of monolithic and reinforced Al-Fe-V-Si materials10.1163/156855109X434775 ↗
15. The microstructure of CO2 laser welds in an Al-Fe-V-Si alloy10.1016/0921-5093(94)09720-8 ↗
16. Crystal structure of β-Al4.5FeSi10.1107/S0108768193013096 ↗
17. β-Al4.5FeSi: a combined synchrotron powder diffraction, electron diffraction, high-resolution electron microscopy and single-crystal X-ray diffraction study of a faulted structure10.1107/S0108768197017047 ↗
18. Electron microscope study of Al-Fe-Si intermetallics in 6201 aluminum alloy10.1007/BF02649760 ↗
19. As-cast morphology of iron-intermetallics in Al-Si foundry alloys10.1016/j.scriptamat.2005.06.028 ↗
20. Intermetallic compound formation in Fe-Al-Si ternary system: Part I10.1016/S1044-5803(03)00006-8 ↗
21. Effect of iron content on the formation of β-Al5FeSi and porosity in Al-Si eutectic alloys10.1016/j.jmatprotec.2008.02.073 ↗
22. Mondolfo · 1990
23. Effect of Fe, Si and cooling rate on the formation of Fe- and Mn-rich intermetallics in Al-5Mg-0.8Mn alloy10.1016/j.jmst.2015.10.010 ↗
24. The dependence of the β-AlFeSi to α-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements10.1016/j.msea.2004.09.073 ↗
25. Addition of iron for the removal of the â-AlFeSi intermetallic by refining of á-AlFeSi phase in an Al-7.5Si-3.6Cu alloy10.1016/j.mseb.2010.03.032 ↗
26. Bonding interfacial characterization of SiCp/8009Al composite and A356 aluminum alloy using compound casting10.1016/j.jmatprotec.2018.08.007 ↗
27. On the reaction scheme and liquidus surface in the ternary system Al-Fe-Si10.1007/s11661-007-9182-x ↗
28. Phase equilibria and structural investigations in the system Al-Fe-Si10.1016/j.intermet.2011.05.003 ↗
29. Thermodynamic assessment of the Al-Fe-Si system
30. A thermodynamic description of the Al-Fe-Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments10.1016/j.intermet.2008.01.003 ↗
31. Solid-state intermetallic phase transformations in 3XXX aluminum alloys10.1016/S1359-6454(02)00085-X ↗
32. Shewmon · 1969
33. Porter · 1992
34. Christian · 2002