journal article·2019-03

Improved thermoelectric performances of nanocrystalline Sb2Te3/Cr bilayers by reducing thermal conductivity in the grain boundaries and heterostructure interface

Ryotaro Mori, Takuya Kurokawa, Kazuki Yamauchi, Saburo Tanaka, Masayuki Takashiri

Vacuum· Volume 161
Publisher page

Abstract

Abstract Nanocrystalline Sb2Te3/Cr bilayers with varying Cr layer thicknesses were prepared with the aim of improving thermoelectric performances. Prior to the deposition of Sb2Te3 films, Cr layers with thicknesses ranging from 0 to 116 nm were deposited on glass substrates. The cross-sectional morphologies of the Sb2Te3/Cr bilayers showed that the Cr layer was tightly connected to both the Sb2Te3 film and the substrate. The highest power factor of 9.1 μW/(cm·K2) was obtained for the single Sb2Te3 film, while the lowest thermal conductivity (measured using the 3ω method) of 0.75 W/(m·K) was recorded for the Sb2Te3/Cr bilayer with a Cr layer thickness of 73 nm. This was attributed to combined phonon scattering on the grain boundaries of the nanocrystalline Sb2Te3 films and the heterostructure interface between the Sb2Te3 film and the Cr layer. The highest figure-of-merit (ZT = 0.28) was achieved for the Sb2Te3/Cr bilayer (Cr = 73 nm), while the single Sb2Te3 film gave a ZT of 0.11. We conclude that the thermoelectric performance of the nanocrystalline Sb2Te3/Cr bilayers could be improved by introducing a Cr layer of an appropriate thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Flexible thermoelectric generator for ambient assisted living wearable biometric sensors10.1016/j.jpowsour.2010.11.081 ↗
2. Thermoelectric converters of human warmth for self-powered wireless sensor nodes10.1109/JSEN.2007.894917 ↗
3. Energy harvesting from hybrid indoor ambient light and thermal energy sources for enhanced performance of wireless sensor nodes10.1109/TIE.2010.2102321 ↗
4. Efficiency determination and general characterization of thermoelectric generators using an absolute measurement of the heat flow10.1088/0957-0233/16/5/002 ↗
5. Power density optimization for micro thermoelectric generators10.1016/j.energy.2015.10.032 ↗
6. Fabrication and characterization of bismuth-telluride-based alloy thin film thermoelectric generators by a flash evaporation method10.1016/j.sna.2007.05.030 ↗
7. Multi-layered-stack thermoelectric generators using p-type Sb2Te3 and n-type Bi2Te3 thin films by radio-frequency magnetron sputtering10.1016/j.vacuum.2017.07.030 ↗
8. Thin-film thermoelectric devices with high room-temperature figures of merit10.1038/35098012 ↗
9. Dual-bath electrodeposition of n-type Bi-Te/Bi-Se multilayer thin films10.1016/j.jallcom.2015.07.166 ↗
10. Enhancement in thermoelectric properties of Te-embedded Bi2Te3 by preferential phonon scattering in heterostructure interface10.1016/j.nanoen.2018.03.009 ↗
11. Enhanced thermoelectric properties of phase-separating bismuth selenium telluride thin films via a two-step method10.1063/1.4928311 ↗
12. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
13. Comparison of crystal growth and thermoelectric properties of n-type Bi-Se-Te and p-type Bi-Sb-Te nanocrystalline thin films: effects of homogeneous irradiation with an electron beam10.1063/1.4881676 ↗
14. Thermoelectric properties of nanocrystalline Bi3Se2Te thin films grown using pulsed laser deposition10.1016/j.jallcom.2016.03.006 ↗
15. Structural, optical, and transport properties of nanocrystalline bismuth telluride thin films treated with homogeneous electron beam irradiation and thermal annealing10.1088/0957-4484/27/33/335703 ↗
16. Enhanced thermoelectric properties of electropolymerized poly (3,4-ethylenedioxythiophene) thin films by optimizing electrolyte temperature and thermal annealing temperature10.1016/j.orgel.2018.01.028 ↗
17. Combined effect of nanoscale grain size and porosity on lattice thermal conductivity of bismuth-telluride-based bulk alloys10.1063/1.4759326 ↗
18. Fabrication of a flexible bismuth telluride power generation module using microporous polyimide films as substrates10.1007/s11664-013-2852-0 ↗
19. Precise control of thermal conductivity at the nanoscale through individual phonon-scattering barriers10.1038/nmat2752 ↗
20. Thermal conductivity and heat transfer in superlattices10.1063/1.120126 ↗
21. The effect of Cr buffer layer thickness on voltage generation of thin-film thermoelectric modules
22. Combination of electrodeposition and transfer processes for flexible thin-film thermoelectric generators10.3390/coatings8010022 ↗
23. Effects of Cr interlayer thickness on adhesive, structural, and thermoelectric properties of antimony telluride thin films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2016.10.069 ↗
24. Scherrer · 1995 · 211
25. Effect of thermal annealing on the structural and thermoelectric properties of electrodeposited antimony telluride thin films10.1016/j.jallcom.2016.05.268 ↗
26. Thermal conductivity of a-Si:H thin films10.1103/PhysRevB.50.6077 ↗
27. Anisotropic analysis of nanocrystalline bismuth telluride thin films treated by homogeneous electron beam irradiation10.2320/matertrans.M2016295 ↗
28. Development of a thermal conductivity measurement system using the 3ω method and application to thermoelectric particles10.1007/s11664-014-2993-9 ↗
29. Structural and thermoelectric properties of nanocrystalline bismuth telluride thin films under compressive and tensile strain10.1007/s11664-014-3496-4 ↗
30. Combined infrared spectroscopy and first-principles calculation analysis of electronic transport properties in nanocrystalline Bi2Te3 thin films with controlled strain10.1016/j.jallcom.2017.01.194 ↗
31. Topotactical reactions with ferrimagnetic oxides having hexagonal crystal structures—I10.1016/0022-1902(59)80070-1 ↗
32. Cullity · 2001
33. Thermoelectric properties of n-Type nanocrystalline bismuth-telluride based thin films deposited by flash evaporation10.1063/1.2717867 ↗
34. Cross-plane thermal conductivity of highly oriented nanocrystalline bismuth antimony telluride thin films10.1016/j.jallcom.2009.10.117 ↗
35. Glancing angle deposition to modify microstructure and properties of sputter deposited chromium thin films10.1016/S0257-8972(03)00413-4 ↗
36. Characteristics of nanostructured bismuth telluride thin films fabricated by oblique deposition10.1016/j.vacuum.2017.11.035 ↗
37. Effect of grain size on thermoelectric properties of n-type nanocrystalline bismuth-telluride based thin films10.1063/1.2990774 ↗
38. Effect of grain size on thermal transport in post-annealed antimony telluride thin films10.1186/s11671-015-0733-6 ↗
39. Low intrinsic c-axis thermal conductivity in PVD grown epitaxial Sb2Te3 films10.1063/1.5025491 ↗
40. Flexible porous bismuth telluride thin films with enhanced figure of merit using micro-phase separation of block copolymer
41. Thermal conductivity of nanocrystalline silicon: importance of grain size and frequency-dependent mean free paths10.1021/nl1045395 ↗
42. Strain and grain size effects on thermal transport in highly-oriented nanocrystalline bismuth antimony telluride thin films10.1016/j.ijheatmasstransfer.2014.04.048 ↗
43. Chemical synthesis of anisotropic nanocrystalline Sb2Te3 and low thermal conductivity of the compacted dense bulk10.1166/jnn.2008.062 ↗
44. Measurement of thermal boundary conductance of a series of metal-dielectric interfaces by the transient thermoreflectance technique10.1115/1.1857944 ↗