journal article·2018-03Open access

Microwave plasma annealing of sol-gel deposited tantalum oxide and zinc oxide films

Rehab Ramadan, Jean Gabriel Simiz, María Dolores Ynsa, Miguel Manso Silván

Vacuum· Volume 149

Abstract

The sol-gel process allows the high throughput formation of transition metal oxide thin films. Microwave plasma annealing (MwPA) treatments have been performed on thin films of two different transition metal oxides, Ta2O5 and ZnO, selected as representatives of covalently and strongly ionic bonded oxides, respectively. Ta2O5 has been explored as a dielectric barrier for porous silicon structures. The main limitation of the sol-gel spin coating in this case is the surface roughness of the coating, which is highly improved upon Ar MwPA. The treatment leads additionally to a microstructural activation and interface development comparable to a 500ºC thermal annealing. The MwPA of ZnO is a quasi-equivalent process to a 200ºC thermal annealing, preventing grain growth and promoting nanocrystalline phases. This is suggested to have a direct impact on the optical and electronic properties of the ZnO films. The MwPA films show wider optical band gap than thermally annealed ones. An impedance analysis further shows that the MwPA ZnO films present lower equivalent resistance and higher equivalent capacitance than the thermal films. These results are promising for the development of new processing routes for widely demanded transition metal oxide thin films
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Metal oxide semiconductor thin-film transistors for flexible electronics10.1063/1.4953034 ↗
2. ZnO nanostructures for optoelectronics: material properties and device applications10.1016/j.pquantelec.2010.04.001 ↗
3. Metal oxide gas sensors: sensitivity and influencing factors10.3390/s100302088 ↗
4. Titanium nanostructures for biomedical applications10.1088/0957-4484/26/6/062002 ↗
5. Solution processable metal oxide thin film deposition and material growth for electronic and photonic devices10.1002/admi.201600610 ↗
6. Flexible polymer solar cell modules with patterned vanadium suboxide layers deposited by an electro-spray printing method10.1016/j.solmat.2014.07.053 ↗
7. Simulation of reactive sputtering from a concentric dual-source magnetron in roll-to-roll coating processes10.1016/0042-207X(94)90323-9 ↗
8. Optical properties of functional hybrid organic-inorganic nanocomposites10.1002/adma.200300389 ↗
9. Micro-spot, UV and wetting patterning pathways for applications of biofunctional aminosilane-titanate coatings10.1007/s10544-006-9027-1 ↗
10. Sol-gel metal oxide dielectrics for all-solution-processed electronics10.1016/j.mser.2017.01.003 ↗
11. Photocatalytic activity of thin TiO2 films deposited using sol-gel and plasma enhanced chemical vapor deposition methods10.1016/j.ceramint.2012.09.046 ↗
12. Aluminum-doped zinc oxide thin films prepared by sol-gel and RF magnetron sputtering10.12693/APhysPolA.120.149 ↗
13. Functionality of aerosol-gel deposited TiO2 thin films processed at low temperature10.1023/A:1020762625048 ↗
14. Influence of the excitation frequency on CH4/H/H-2 plasmas for diamond film deposition: electron energy distribution function and atomic hydrogen concentration10.1088/0963-0252/10/1/313 ↗
15. Ultra-thin gate dielectrics grown by low-temperature processes for applications to ULSI devices10.1016/0169-4332(95)00227-8 ↗
16. Deposition of thin films using microwave plasmas: present status and trends10.1016/0042-207X(95)00213-8 ↗
17. Low-temperature dry etching10.1116/1.577364 ↗
18. Sterilization and decontamination of medical instruments by low-pressure plasma discharges: application of Ar/O-2/N-2 ternary mixture10.1088/0022-3727/42/8/085207 ↗
19. Effect of microwave annealing on electrical characteristics of TiN/Al/TiN/HfO2/Si MOS capacitors10.1063/1.4991858 ↗
20. Microwave annealing enhances Al-induced lateral crystallization of amorphous silicon thin films10.1016/j.jcrysgro.2004.07.089 ↗
21. Etching effects on ferroelectric capacitors with multilayered electrodes10.1143/JJAP.36.2747 ↗
22. The dry etching of a sol-gel deposited ZnO thin film in a high density BCl3/Ar plasma10.1016/j.tsf.2009.10.144 ↗
23. Photocatalytic performance of TiO2 films produced with combination of oxygen-plasma and rapid thermal annealing10.1016/j.tsf.2011.07.020 ↗
24. Plasma surface modification of TiO2 photocatalysts for improvement of catalytic efficiency10.1016/j.surfcoat.2005.07.097 ↗
25. Room-temperature crystallization of amorphous films by RF plasma treatment10.1016/j.tsf.2008.11.086 ↗
26. Influence of operating parameters on surface properties of RF glow discharge oxygen plasma treated TiO2/PET film for biomedical application10.1016/j.msec.2013.12.018 ↗
27. Superhydrophobic TiO2 surfaces: preparation, photocatalytic wettability conversion, and superhydrophobic-superhydrophilic patterning10.1021/jp0744432 ↗
28. Surface modification of ZnO layers via hydrogen plasma treatment for efficient inverted polymer solar cells10.1021/acsami.5b09533 ↗
29. Mesoporous silica thin films prepared by argon plasma treatment of sol-gel-derived precursor10.1016/j.apsusc.2004.10.049 ↗
30. Surface analysis of plasma-patterned biofunctional hybrid titanate-aminosilane xerogel films10.1016/j.jcis.2004.02.087 ↗
31. Hydrophobic perfluoro-silane functionalization of porous silicon photoluminescent films and particles10.1016/j.apsusc.2016.01.119 ↗
32. Microstructure based optical modeling of ZnO-porous silicon permeated nanocomposites10.1088/0022-3727/48/29/295102 ↗
33. SIMNRA, a simulation program for the analysis of NRA, RBS and ERDA
34. Cross-sections for 170.5-degrees backscattering of he-4 from carbon for he-4 energies between 1.6 and 5.0 Mev10.1016/0168-583X(89)90476-X ↗
35. Synthesis of coral-like tantalum oxide films via anodization in mixed organic-inorganic electrolytes10.1371/journal.pone.0066447 ↗
36. Performance and detection mechanism of a new class of catalyst (Pd, Pt, or Ag)-adsorptive oxide (SnOx or ZnO)-insulator-semiconductor gas sensors10.1016/0925-4005(94)01265-2 ↗