The influence of sintering temperature and pressure on microstructure and mechanical properties of carbonyl iron powder materials fabricated by electric current activated sintering
Source abstract
Abstract
Abstract In this paper, we studied the microstructure and mechanical properties of carbonyl iron powder materials fabricated by electric current activated sintering at temperatures of 650–800 °C under pressures of 20–50 MPa. All sintered samples consist of fine ferrite and spheroidized particles. The average density, average hardness and bending strength increase with an increase in either temperature or pressure. In particular, non-uniform distributions of density and hardness within the sintered samples were discussed, and a three-zone model was also proposed for simulation. Experimental and simulation results reveal that (1) the temperature distribution is homogeneous during sintering. (2) the inhomogeneous axial stress distribution, which is caused by a unidirectional load, is responsible for a poor sintering uniformity. In order to obtain homogenous sintering, more attention should be paid to axial stress distribution rather than to temperature distribution in electric current activated sintering of high thermal conductivity conductive powders like carbonyl iron powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Crystallization kinetics and spark plasma sintering of amorphous Ni53Nb20Ti10Zr8Co6Ta3 powders prepared by mechanical alloying10.1016/j.vacuum.2015.01.002 ↗
2. Spark-plasma sintering of W-5.6 Ni-1.4 Fe heavy alloys: densification and grain growth10.1007/s11661-012-1454-4 ↗
3. Transmitting, emitting and controlling light: processing of transparent ceramics using current-activated pressure-assisted densification10.1016/j.scriptamat.2013.02.013 ↗
4. Mechanical behaviors of porous Ti with high porosity and large pore size prepared by one-step spark plasma sintering technique10.1016/j.vacuum.2015.09.024 ↗
5. Continuous in situ functionally graded silicon nitride materials10.1016/j.actamat.2009.01.043 ↗
6. Effect of the addition of nano-Al2O3 on the microstructure and mechanical properties of twinned Al0.4FeCrCoNi1.2Ti0.3 alloys10.1016/j.vacuum.2016.05.019 ↗
7. Electric current activated/assisted sintering (ECAS): a review of patents 1906–200810.1088/1468-6996/10/5/053001 ↗
8. Electric current activation of sintering: a review of the pulsed electric current sintering process10.1111/j.1551-2916.2010.04210.x ↗
9. The influence of premolding load on the electrical behavior in the initial stage of electric current activated sintering of carbonyl iron powders10.1063/1.4808339 ↗
10. Examination of electrical conduction of carbonyl iron powder compacts10.2320/matertrans.M2014311 ↗
11. K. Inoue, U.S. Patent 3,508,029, April (1970).10.1136/bmj.3.5721.508 ↗
12. Influence of premolding pressure in electric-discharge sintering on the physicomechanical properties of a copper-tin-abrasive composite10.1007/BF00805559 ↗
13. Pressure effect on the homogeneity of spark plasma-sintered tungsten carbide powder10.1111/j.1551-2916.2009.03211.x ↗
14. Effects of pressure application method on transparency of spark plasma sintered alumina10.1111/j.1551-2916.2010.04274.x ↗
15. Finite element modeling of electric current-activated sintering: the effect of coupled electrical potential, temperature and stress
16. Multi-phenomena simulation of electric field assisted sintering10.1007/s10853-008-2744-5 ↗
17. Spark plasma sintering: possibilities and limitations10.4028/www.scientific.net/KEM.264-268.719 ↗
18. Microstructure and properties of carbonyl iron powder10.1007/BF03258115 ↗
19. Thermomagnetometry and thermogravimetric analysis of carbonyl iron powder10.1016/0040-6031(89)85455-3 ↗
20. Mechanical properties, and phase stability of mechanically alloyed Fe-N powder compositions10.2355/isijinternational.36.947 ↗
21. The effects of wall friction in powder compaction, Colloid. Surface. A: physicochem. Eng
22. Neck formation and self-adjusting mechanism Of neck growth of conducting powders in spark plasma sintering10.1111/j.1551-2916.2005.00777.x ↗
23. Electrical resistivity of metal powder aggregates10.1007/s11663-007-9097-3 ↗
24. Finite element simulation to influence of compacting mode on PM product properties
25. Wright · 2010
26. A multi-field coupled FEM model for one-step-forming process of spark plasma sintering considering local densification of powder material10.1007/s10853-011-5515-7 ↗
27. Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions10.1016/j.msea.2004.11.019 ↗
28. McWilliams · 2008
29. Simulation of thermal and electric field evolution during spark plasma sintering10.1016/j.ceramint.2008.02.013 ↗