Optimization of AlCrO-based absorber with Mo infrared reflector for solar selective applications
Source abstract
Abstract
Abstract Preparation and optimization of AlCrO-based solar selective absorber is reported in this paper. The AlCrOx thin films were prepared on silicon and quartz substrates by cathodic arc ion plating. The chemical composition and structure of the thin films were measured by RBS, XRD and TEM. And the optical constants were obtained by modeling of the reflectance and transmittance spectra of the thin films on quartz substrates. A three-layered stack absorber was then designed using the optical constants. The effects of composition and thickness of individual layers in the stack on the reflectance spectra was systematically investigated, and an optimized absorptance of 0.942 was obtained. The optimized stack with Mo infrared reflective layer was deposited on silicon substrate, and very similar reflective behavior between the measured and simulated spectra was observed. The experimental absorptance and thermal emittance of the stack were 0.927 and 0.094, and the measured thicknesses by TEM of each layer were very close to the calculated thicknesses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Microstructural, optical properties and thermal stability of MgO/Zr/MgO multilayered selective solar absorber coatings10.1016/j.solener.2014.11.009 ↗
2. Optimization of TiAlN/TiAlON/Si 3N4 solar absorber coatings10.1016/j.solener.2015.05.042 ↗
3. The spectral selective absorbing characteristics and thermal stability of SS/TiAlN/TiAlSiN/Si3N4 tandem absorber prepared by magnetron sputtering10.1016/j.solener.2014.11.005 ↗
4. Tandem structured spectrally selective coating layer of copper oxide nano-wires combined with cobalt oxide nanoparticles10.1016/j.nanoen.2014.10.018 ↗
5. Enhanced thermal stability of W-Ni-Al2O3 cermet-based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
6. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
7. Very low-emittance solar selective surfaces using new film structures10.1063/1.351510 ↗
8. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
9. Optical characterization of industrially sputtered nickel-nickel oxide solar selective surface10.1016/S0038-092X(00)00023-2 ↗
10. Microstructure and spectral selectivity of Mo-Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
11. Structure and optical properties of Ag-Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
12. Optimization of solar absorbing three-layer coatings10.1016/j.solmat.2005.03.009 ↗
13. Long-term thermal stability of CrAlO-based solar selective absorbing coating in elevated temperature air10.1016/j.solmat.2014.12.009 ↗
14. Theiss · 2012
15. Determination of optical constants from intensity measurements at normal incidence10.1364/AO.7.000435 ↗
16. Classical propagation
17. Intraband and interband processes in the infrared spectrum of metallic aluminum10.1103/PhysRevB.34.5191 ↗
18. Modeling the optical dielectric function of semiconductors: extension of the critical-point parabolic-band approximation10.1103/PhysRevB.45.11749 ↗
19. The relationship between the distribution of electronic states and the optical absorption spectrum of an amorphous semiconductor: an empirical analysis10.1063/1.365643 ↗
20. Advanced characterization tools for thin films in low-E systems10.1016/S0040-6090(99)00306-5 ↗
21. Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiOy layers10.1016/j.apsusc.2015.07.193 ↗
22. Edward · 1998 · 303
23. Thermal aging test of AlCrNO-based solar selective absorbing coatings prepared by cathodic arc plating10.1016/j.solmat.2015.01.015 ↗
24. Functional multi-layer nitride coatings for high temperature solar selective applications10.1016/j.solmat.2013.10.024 ↗