journal article·2012-07

Microstructure and shear strength of Mo–Cu/Cr18-Ni8 brazing joint in vacuum

Juan Wang, Yajiang Li, Deshuang Zheng

Vacuum· Volume 86· Issue 12
Publisher page

Abstract

Abstract High density Mo–Cu composite and Cr18-Ni8 stainless steel were brazed with Ag–Cu filler metal in vacuum of 10 −5 Pa. The microstructure characteristics of Mo–Cu/Cr18-Ni8 brazed joint were investigated by field-emission scanning electron microscope (FESEM) with energy dispersive spectrometer (EDS) and shear strength was measured by shearing test. The results indicated that a Mo–Cu/Cr18-Ni8 joint with shear strength of 125 MPa was obtained at 940 °C for 20 min. There were Ag–Cu eutectic and Cu-rich phase without brittle intermetallic compounds formed in the joint. The shear fracture exhibited plastic feature with shear dimple and fracture located at the interface between braze seam and Cr18-Ni8 stainless steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Study of a Mo-Cu pseudo-alloy obtained from mechanically activated charge10.1007/s11041-007-0084-8 ↗
2. Study and methods of analysis of mechanically alloyed Cu–Mo powders10.1016/j.msea.2007.02.017 ↗
3. Laser rapid prototyping process of Mo-Cu composites part
4. Weldable ductile molybdenum alloy development10.1016/j.jnucmat.2008.08.021 ↗
5. Analysis of influence factors in welding of molybdenum alloys
6. Weldability of molybdenum and its alloy sheet
7. Sealing technique of Mo-Cu alloy and 95% aluminum oxide ceramics
8. Microstructure and mechansical property analysis of AlN ceramic with Mo-Ni-Cu alloy active brazed joints