Performance characterization on a novel intermetallic layer produced by interdiffusion between Ti film and 5083 Al alloy
Source abstract
Abstract
Abstract By means of magnetron sputtering method, pure Ti film with thickness of 1.25 μm was deposited on the surface of 5083 Al alloy specimens. The specimens were heated by ion bombardment in a plasma nitriding unit employing a mixed gas of N2 and H2 at 460 °C for 16 h. The treated surface layers of specimens were characterized by using SEM equipped with EDS, TEM, XRD analysis and nanoindentation as well as potentiodynamic polarization tests. The results show that the Al18Ti2Mg3 layer with a thickness of 6.3 μm can be formed on the surface of the specimens during interdiffusing of Ti, Mg and Al across the interface between Ti film and the substrate alloy. The interdiffusion layer possesses much higher Young's modulus (131 GPa), the nanohardness (8.97 GPa) and corrosion potential (−0.75VSCE) than those of 5083 Al–Mg alloy. Additionally, the Al18Ti2Mg3 phase layer has an excellent plastic deformation ability resulting mainly from its plasticity deformation power dissipation ratio (ηp) up to 87%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Miller · Mater Sci Eng A · 2000 · 280 · 3710.1016/S0921-5093(99)00653-X ↗
2. Man · Mater Lett · 2007 · 61 · 405810.1016/j.matlet.2007.01.016 ↗
3. Diesselberg · Surf Coat Technol · 2004 · 177–178 · 39910.1016/j.surfcoat.2003.09.015 ↗
4. Visuttipitukul · Mater Trans · 2003 · 44 · 141210.2320/matertrans.44.1412 ↗
5. Xin · Surf Coat Technol · 2005 · 199 · 18410.1016/j.surfcoat.2004.11.044 ↗
6. Figueroa · Wear · 2012 · 276-277 · 5310.1016/j.wear.2011.12.005 ↗
7. Ghosh · Acta Mater · 2005 · 53 · 322510.1016/j.actamat.2005.03.028 ↗
8. Laser processing: surface treatment and film deposition
9. Almeida · Mater Sci Eng A · 2001 · 303 · 27310.1016/S0921-5093(00)01838-4 ↗
10. Stambekova · Appl Surf Sci · 2012 · 258 · 448310.1016/j.apsusc.2012.01.013 ↗
11. Fu · Surface · 1998 · 99 · 287
12. Rajan · J Alloys Compd · 2008 · 453 · L410.1016/j.jallcom.2006.11.181 ↗
13. Uenishi · Intermetallics · 1999 · 7 · 55310.1016/S0966-9795(98)00071-5 ↗
14. Matsubara · Intermetallics · 2000 · 8 · 81510.1016/S0966-9795(00)00014-5 ↗
15. Yu · J Alloys Compd · 2008 · 457 · 40410.1016/j.jallcom.2007.02.125 ↗
16. Reza Gordani · Opt Lasers Eng · 2008 · 46 · 55010.1016/j.optlaseng.2008.02.002 ↗
17. Molina · Mater Sci Eng A · 2004 · 283 · 29910.1016/j.msea.2004.03.016 ↗
18. Dubois · Chem Soc Rev · 2012 · 41 · 676010.1039/c2cs35110b ↗
19. Yao · Mater Lett · 2008 · 62 · 283610.1016/j.matlet.2008.01.058 ↗
20. Lee · Metall Mater Trans A · 2004 · 25 · 2005
21. Gao · Scr Mater · 2012 · 67 · 19310.1016/j.scriptamat.2012.04.015 ↗
22. Wu · Vacuum · 2011 · 86 · 110.1016/j.vacuum.2011.04.021 ↗
23. Ni · Appl Phys Lett · 2004 · 85 · 402810.1063/1.1811377 ↗
24. Li · Intermetallics · 2007 · 15 · 70610.1016/j.intermet.2006.10.010 ↗
25. Goken · Acta Mater · 2001 · 49 · 90310.1016/S1359-6454(00)00375-X ↗
26. Dub · J Mater Sci Lett · 2001 · 20 · 104310.1023/A:1010968626384 ↗
27. Achanta · Intermetallics · 2010 · 18 · 209610.1016/j.intermet.2010.06.016 ↗