journal article·2021-04

Characterization of acceleration zone shifting in an anode-layer-type Hall thruster RAIJIN66

Yushi Hamada, Rei Kawashima, Junhwi Bak, Kimiya Komurasaki, Hiroyuki Koizumi

Vacuum· Volume 186
Publisher page

Abstract

Abstract The location of the ion acceleration zone has been known to affect the performance and lifetime of a Hall thruster. Herein, the magnetic field in the anode-layer-type Hall thruster RAIJIN66 was designed to shift the acceleration zone downstream beyond the discharge channel exit. To examine the effectiveness of the design concept, plasma diagnosis using an emissive probe was conducted to obtain a one-dimensional plasma profile on the channel centerline. In addition, a two-dimensional potential profile was obtained to observe the effects of the presheath on the shifted potential structure. The results proved that the acceleration zone was pushed downstream along with the shifted magnetic field. With increasing discharge voltage, the axial length of the acceleration zone contracted at around the peak of the radial magnetic flux density. The ion current density lost to the guard-ring was estimated to be 9.9 mA/cm2, which is comparable to the current density from the magnetically shielded stationary plasma thrusters. Furthermore, the measured two-dimensional potential distribution revealed the existence of a structure that attracted ions to the wall.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Diagnostics and Applications · Electrohydrodynamics and Fluid Dynamics · Cryptographic Implementations and Security

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Performance characterization of a low-power magnetically shielded Hall thruster with an internally-mounted hollow cathode10.1088/1361-6595/ab47de ↗
2. The 12.5 kW Hall effect rocket with magnetic shielding (HERMeS) for the asteroid redirect robotic mission
3. Semi-empirical method of Hall thrusters lifetime prediction
4. Magnetic shielding of a laboratory Hall thruster. I. Theory and validation10.1063/1.4862313 ↗
5. Magnetic shielding of a laboratory Hall thruster. II. Experiments10.1063/1.4862314 ↗
6. Optimization of a wall-less Hall thruster10.1063/1.4932196 ↗
7. External discharge plasma thruster10.2514/1.B36900 ↗
8. Fundamental difference between the two Hall thruster variants10.1063/1.1409344 ↗
9. Garner · 1994
10. Measurement of erosion rate by absorption spectro-scopy in a Hall thruster10.1063/1.2001630 ↗
11. Developments of robust anode-layer intelligent thruster for Japan IN-space propulsion system
12. Two-dimensional numerical model of plasma flow in a Hall thruster10.2514/3.23974 ↗
13. Discharge current oscillation in Hall thrusters10.2514/1.12759 ↗
14. Magnetic topology to stabilize ionization oscillation in anode-layer-type Hall thruster
15. Particle simulation of plasma dynamics inside an anode-layer Hall thruster
16. Particle simulation of plume flows from an anode-layer Hall thruster10.2514/1.28384 ↗
17. Feasibility of high power multi-mode EPS development based on the thruster with anode layer
18. Hall thruster development for Japanese space propulsion programs10.2322/tjsass.60.320 ↗
19. Endurance test facility and test status of microwave discharge ion thruster
20. Determining parameter sets for low-frequency-oscillation-free operation of Hall thruster Determining parameter sets for low-frequency-oscillation-free operation of Hall thruster10.1063/1.2771039 ↗
21. Recommended practice for use of emissive probes in electric propulsion testing10.2514/1.B35697 ↗
22. Plasma formation and cross-field electron transport induced by azimuthal neutral inhomogeneity in an anode layer Hall thruster10.1063/1.5090931 ↗
23. Goebel · 2008
24. Laser-induced fluorescence measurements of acceleration zone scaling in the 12.5 kW HERMeS Hall thruster10.1063/1.5040388 ↗
25. Physics of closed drift thrusters10.1088/0963-0252/8/1/021 ↗
26. Internal plasma potential measurements of a Hall thruster using plasma lens focusing