Microstructure and compressive properties of V–V8C7/Fe core-shell rod-reinforced iron-based composite fabricated via two-step in-situ reaction
Source abstract
Abstract
Abstract To enhance the strength of iron-based alloys, a novel vanadium-vanadium carbide/iron (V–V8C7/Fe) core-shell rod-reinforced iron-based composite is designed and prepared via a two-step in-situ reaction at 1150 °C × 5 min +1100 °C × (4, 6, 8, 10 h). The V–V8C7/Fe core-shell rod consists of a ductile V-core and a gradient-structured V8C7/Fe-shell. The phases of the composite are V, V2C, V8C7, α-Fe, and P-rich phases. When the ratio (K) of the volume of V8C7/Fe-shell to the volume of the V-core is approximately 54, the comprehensive mechanical properties of the composite are optimal. The maximum hardness, maximum compressive strength and strain are about 1296 HV0.2, 1804 MPa and 13.9%, respectively. The high strength and high toughness of the composites are mainly attributed to the synergistic effect between the high toughness of the metal V-core and the gradient-distribution structure of the V8C7/Fe-shell layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Investigation of chromium and vanadium carbide composite coatings on CK45 steel by Thermal Reactive Diffusion10.1016/j.surfcoat.2016.01.048 ↗
2. Metal matrix composites-from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
3. Surface alloying of high-vanadium high-speed steel on ductile iron using plasma transferred arc technique: microstructure and wear properties10.1016/j.matdes.2016.03.114 ↗
4. Fracture toughness of carbides in tool steels evaluated by nanoindentation10.1016/j.actamat.2007.03.028 ↗
5. Strengthening and toughening mechanisms of ceramic nanocomposites10.1111/j.1151-2916.1998.tb02503.x ↗
6. The investigation on the fabrication and microstructure of NbTi-(NbTi)C Fe-based composite10.1016/j.vacuum.2019.108862 ↗
7. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
8. Progress on discontinuously reinforced titanium matrix composites10.1016/j.jallcom.2018.07.100 ↗
9. Effects of shot peening on fatigue behavior in high speed steel and cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructure10.1016/j.msea.2012.10.045 ↗
10. Fabrication methods of particulate reinforced Aluminium metal matrix composite-A review
11. Volume fraction effect of V8C7 particulates on impact toughness and wear performance of V8C7/Fe monolithic composites10.1007/s11665-013-0853-z ↗
12. Evaluation of growth behaviour of vanadium carbides-reinforced iron-based surface compound layer by in-situ reaction10.1016/j.vacuum.2019.04.057 ↗
13. In situ production of vanadium carbide particulates reinforced iron matrix surface composite by cast-sintering10.1016/j.matdes.2006.07.008 ↗
14. In situ synthesis of vanadium carbide-copper nanocomposite by a modified mechanochemical combustion method10.1016/j.ceramint.2016.02.129 ↗
15. Ultra-low temperature fabrication of vanadium carbide reinforced aluminum nano composite through spark plasma sintering10.1016/j.jallcom.2018.04.239 ↗
16. Thermodynamic re-assessment of the V-C system10.1016/j.jallcom.2005.11.033 ↗
17. Microstructural characterization of a V2C and V8C7 ceramic-reinforced Fe substrate surface compound layer by EBSD and TEM10.1016/j.jallcom.2018.02.313 ↗
18. Understanding the mechanical properties of vanadium carbides: nano-indentation measurement and first-principles calculations10.1016/j.jallcom.2012.09.014 ↗
19. Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites10.1016/j.ceramint.2012.06.085 ↗
20. Effect of vanadium carbide on dry sliding wear behavior of powder metallurgy AISI M2 high speed steel processed by concentrated solar energy10.1016/j.matchar.2016.10.001 ↗
21. Microstructure, mechanical and wear properties study of vanadium carbide particles reinforced iron matrix composite10.4028/www.scientific.net/AMR.476-478.686 ↗
22. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding10.1016/j.ijrmhm.2008.10.008 ↗
23. Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC10.1016/j.apsusc.2017.03.137 ↗
24. Reaction synthesis of in situ vanadium carbide particulates-reinforced iron matrix composites by spark plasma sintering10.1007/s10853-010-4295-9 ↗
25. Improving the mechanical properties of tantalum carbide particle-reinforced iron-based composite by varying the TaC contents10.1016/j.jallcom.2017.08.050 ↗
26. Relationship between hardness and fracture toughness in Ti-TiB2 nanocomposite coatings10.1016/j.surfcoat.2012.10.007 ↗
27. Microstructure and impact properties of Ta-TaC core-shell rod-reinforced iron-based composite fabricated by in situ solid-phase diffusion10.1016/j.jallcom.2018.07.267 ↗
28. Self-assembly of TaC@Ta core-shell-like nanocomposite film via solid-state dewetting: toward superior wear and corrosion resistance10.1016/j.actamat.2018.08.055 ↗
29. Effect of laser wavelength on the correlation between plasma temperature and surface hardness of Fe-V-C metallic alloys10.1016/j.sab.2015.09.012 ↗
30. Thermo-reactive deposition processed vanadium carbide coating: growth kinetics model and diffusion mechanism10.1016/j.surfcoat.2012.08.010 ↗
31. Kinetics of niobium carbide reinforced composite coating produced in situ10.1016/j.vacuum.2015.05.035 ↗
32. Kayali · 2012 · vol. 86 · 1428
33. Growth mechanism of in-situ WC grain in Fe-Ni-W-C alloys system10.1016/j.jallcom.2017.11.382 ↗
34. Microstructure and mechanical properties of TiC-Fe surface gradient coating on a pure titanium substrate prepared in situ10.1016/j.jallcom.2018.08.316 ↗
35. Development of a novel lateral force-sensing microindentation technique for determination of interfacial bond strength10.1016/j.actamat.2003.12.047 ↗
36. Microstructural and mechanical properties of in situ WC-Fe/Fe composites10.1007/s11665-015-1742-4 ↗