Design and regularity research of MOCVD heating plate based on experiments and simulations
Source abstract
Abstract
Abstract Metal organic chemical vapor deposition (MOCVD) is the key technique used in developing thin film materials, such as GaAs, InP, and ZnO. The heating system design plays an important role in the overall design of the complete MOCVD system. In this study, the structure of the MB-600D MOCVD resistance heater developed by us was considered as the research object. The distribution of current and temperature in the heating plate can be determined through thermoelectric simulation. Supported by the theory of thermodynamics and thermoelectricity, it can be used for the improved design and regularity research of the heating plate. On this basis, it was found that higher surface emissivity of the heater correlated to greater thermal radiation, stronger heating effect of the graphite disc, and higher overall temperature. A direct correlation was observed between the rotational speed of the graphite disc and the upper surface temperature distribution uniformity; the optimal vertical distance between the graphite disc and heater was also determined. These results provide a theoretical basis to improve the MOCVD heating plates and a solution for high-quality epitaxial growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · nanoparticles nucleation surface interactions · GaN-based semiconductor devices and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Rent management and policy learning in green technology development: the case of solar energy in India
2. Photovoltaic solar energy: conceptual framework10.1016/j.rser.2017.02.081 ↗
3. Quantum design of photosynthesis for bio-inspired solar-energy conversion10.1038/nature22012 ↗
4. Thermal emission in type-II GaSb/GaAs quantum dots and prospects for intermediate band solar energy conversion10.1063/1.3703467 ↗
5. The realistic energy yield potential of GaAs-on-Si tandem solar cells: a theoretical case study10.1364/OE.23.00A382 ↗
6. Kurtz · 2005
7. High-performance inverted in 0.53Ga 0.47As MOSHEMTs on a GaAs substrate with regrown source/drain by MOCVD10.1109/LED.2012.2204431 ↗
8. Chengyuan. Droplet-induced dot, dot-in-hole, and hole structures in GaGe thin films grown by MOCVD on GaAs substrates10.1039/C6CE00778C ↗
9. Monolithically integrated InGaAs/GaAs/AlGaAs quantum well laser grown by MOCVD on exact Ge/Si(001) substrate10.1063/1.4961059 ↗
10. Stability of the tungsten diselenide and silicon carbide heterostructure against high energy proton exposure10.1063/1.4993931 ↗
11. Boosting the photoluminescence of monolayer MoS2 on high‐density nanodimer arrays with sub-10 nm gap
12. Towards high efficiency inverted Sb2Se3 thin film solar cells
13. Nonlinear refractory plasmonics with titanium nitride nanoantennas10.1021/acs.nanolett.6b02376 ↗
14. Remaining useful life prediction for supercapacitor based on long short-term memory neural network
15. Growth of MgxZn1 xO film by MOCVD equipped laser heating system10.1016/j.mseb.2009.12.012 ↗
16. Simulation and analysis of temperature modulate curve in MOCVD with the chipped infrared heating system
17. Development of a new laser heating system for thin film growth by chemical vapor deposition10.1063/1.4748126 ↗
18. Epitaxial growth and characterization of high quality In2O3 films on a-plane sapphire substrates by MOCVD10.1016/j.vacuum.2019.05.035 ↗
19. Enhancement of UV photoluminescence in ZnO tubes grown by metal organic chemical vapour deposition (MOCVD)10.1016/j.vacuum.2018.06.035 ↗
20. MOCVD Pd–Cu alloy films from single source heterometallic precursors10.1016/j.vacuum.2019.05.021 ↗
21. Effect of pressure and time on the self-catalyzed growth of epitaxial GaAs nanostructures by MOCVD10.1016/j.vacuum.2019.03.046 ↗
22. Enhanced performance of solar-blind ultraviolet photo detector based on Mg doped amorphous gallium oxide film10.1016/j.vacuum.2018.10.025 ↗
23. Influencing factors of GaN growth uniformity through orthogonal test analysis10.1016/j.applthermaleng.2015.08.007 ↗
24. Competitive adsorption and two-site occupation effects in metal-organic chemical vapor deposition of ZnO10.1063/1.2731529 ↗
25. Atmospheric pressure chemical vapor deposition of ZnO: process modeling and experiments10.1016/j.tsf.2013.08.009 ↗
26. In situ observation of two-step growth of AlN on sapphire using high-temperature metal–organic chemical vapour deposition10.1039/c3ce40755a ↗
27. Influence of the growth temperature of AlN nucleation layer on AlN template grown by high-temperature MOCVD10.1016/j.matlet.2013.09.096 ↗
28. Temperature uniformity of wafer on a large-sized susceptor for a nitride vertical MOCVD reactor10.1088/0256-307X/29/3/030701 ↗
29. A susceptor with partial-torus groove in vertical MOCVD reactor by induction heating10.1016/j.ijheatmasstransfer.2014.03.088 ↗
30. A susceptor heating structure in MOVPE reactor by induction heating[J]10.1016/j.applthermaleng.2014.03.066 ↗
31. A kinetics model for MOCVD deposition of AlN film based on Grove theory10.1016/j.jcrysgro.2017.08.012 ↗
32. Effect of embedding a porous medium on the deposition rate in a vertical rotating MOCVD reactor based on CFD modeling10.1016/j.icheatmasstransfer.2009.03.019 ↗
33. Stability and process parameter optimization for a vertical rotating ZnO-MOCVD reaction chamber10.1016/j.vacuum.2017.12.008 ↗
34. Chemical reaction-transport model of diethylzinc hydrolysis in a vertical MOCVD reactor10.1016/j.applthermaleng.2018.02.069 ↗
35. Numerical simulation and analysis of process parameters of GaN-MOCVD reactor10.1016/j.icheatmasstransfer.2017.11.011 ↗
36. Numerical simulation of nanostructured thermoelectric generator considering surface to surrounding convection10.1016/j.icheatmasstransfer.2014.06.006 ↗
37. Benchmark study of thermal behavior, surface topography, and dendritic microstructure in selective laser melting of inconel 62510.1007/s40192-019-00130-x ↗
38. Experimentally validated predictions of thermal history and microhardness in laser-deposited Inconel 718 on carbon steel
39. Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron10.1016/j.ijheatmasstransfer.2017.04.055 ↗