Characterization and formation mechanisms of the TiC-Fe cermet layer in Ti-TiC-Fe composites
Source abstract
Abstract
Abstract A Ti-TiC-Fe cermet composite with a core-shell structure was fabricated by an in situ reaction at high temperature. The TiC-Fe cermet layer was formed at the interface between Ti and the gray cast iron (GCI). The XRD results indicate that the TiC-Fe cermet layer is composed mainly of α-Fe, Ti, and TiC. The statistical results of the electron backscattering diffraction (EBSD) indicate that the grain sizes are between 2 and 17 μm with the mean value of about 4 μm. The scanning electron microscope (SEM) analysis results demonstrated that the TiC-Fe cermet layer enwrapped the metallic Ti wire. The size of the TiC particles in the TiC-Fe cermet layer diminished gradually, and the tridimensional morphology varied from dense block to cubes or near-spheroids with the distance from interface of Ti/cermet layer to the interface of cermet layer/GCI. Accordingly, the nano-indentation results showed that the hardness of the TiC-Fe cermet layer decreased gradually with distance from interface of Ti/cermet layer to the interface of cermet layer/GCI, and that the highest hardness value of the TiC-Fe cermet layer is nearly 28.0 GPa. The high hardness and volume fraction of TiC-Fe cermet layer will obviously enhance the wear resistance of composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
2. Strong, tough and stiff bioinspired ceramics from brittle constituents10.1038/nmat3915 ↗
3. Mechanical properties of a hybrid cemented carbide composite
4. Novel MMC microstructure with tailored distribution of the reinforcing phase10.1046/j.1365-2818.2001.00780.x ↗
5. Study of fabrication, testing and characterization of Al/TiC metal matrix composites through different processing techniques
6. Formation mechanism and phase evolution of in situ synthesizing TiC-reinforced 316L stainless steel matrix composites by laser melting deposition10.1016/j.matlet.2018.01.097 ↗
7. Strengthening effects of TiC particles and microstructure refinement in in situ TiC-reinforced Ti matrix composites10.1016/j.matchar.2017.02.004 ↗
8. Study of the preparation of Cu-TiC composites by reaction of soluble Ti and ball-milled carbon coating TiC10.1016/j.rinp.2018.02.059 ↗
9. Wear performance of TiC/Fe cermet electrical discharge coatings10.1016/j.wear.2018.02.007 ↗
10. Enhancing thermal and mechanical response of aluminum using nanolength scale TiC ceramic reinforcement10.1016/j.ceramint.2018.02.135 ↗
11. In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering10.1016/j.jmst.2017.03.006 ↗
12. Kinetics of niobium carbide reinforced composite coating produced in situ10.1016/j.vacuum.2015.05.035 ↗
13. Additive manufacturing of complex-shaped graded TiC/steel composites10.1016/j.matdes.2017.01.024 ↗
14. Study on an Fe–TiC surface composite produced in situ10.1016/S0261-3069(98)00049-1 ↗
15. TiC – based local composite reinforcement obtained in situ in ductile iron based castings with use of rode preform10.1016/j.matlet.2018.03.159 ↗
16. Time dependence of microstructure and hardness in plasma carbonized Ti–6Al–4V alloys10.1016/j.vacuum.2013.02.004 ↗
17. Formation mechanism of TiC by mechanical alloying10.1063/1.112596 ↗
18. In situ fabrication of titanium carbide particulates-reinforced iron matrix composites10.1016/j.matdes.2011.03.031 ↗
19. New strategy to grow TiC coatings on titanium alloy: contact solid carburization by cast iron10.1016/j.jallcom.2018.02.235 ↗
20. Fe–W–C thermodynamics and in situ preparation of tungsten carbide-reinforced iron-based surface composites by solid-phase diffusion10.1016/j.ijrmhm.2016.02.001 ↗
21. In-situ production of Fe–TiC composite10.1016/j.matlet.2007.02.011 ↗
22. Characterization of Mo surface modified Ti by indentation techniques10.1016/j.surfcoat.2013.03.038 ↗
23. Growth kinetics of in situ preparation of dense TiC ceramic layer-reinforced gray cast iron matrix surface composites10.1002/adem.201500122 ↗
24. Diffusion of 44Ti in TiCx10.1063/1.1658229 ↗
25. Interactions in iron-based cermet systems10.1016/S0925-8388(97)00360-5 ↗
26. Mechanism of synthesizing nanocrystalline TiC in different milling atmospheres10.1016/j.ijrmhm.2008.11.003 ↗
27. Formation of TiC hexagonal platelets and their growth mechanism10.1016/j.powtec.2007.09.018 ↗