journal article·2018-02

Microstructure and properties of Cr18-Ni8 steel joints brazed with BNi7+3%Cu composite solder

Guojin Li, Peilei Zhang, Haichuan Shi, Zhishui Yu

Vacuum· Volume 148
Publisher page

Abstract

Abstract A vacuum brazing process using BNi7+3% Cu composite solders to braze Cr18-Ni8 steel was carried out. The joint can be divided into three zones: Isothermally Solidified Zone (ISZ), Athermally Solidified Zone (ASZ) and Diffusion Affected Zone (DAZ). The characteristics of microstructure were observed by scanning electron microscope (SEM). The element distribution in the Cr18-Ni8 steel brazed joint and the content of elements in the organizations were measured by energy dispersive spectrum (EDS). The brazed joints are mainly composed of FeNi3 phases, Ni solid solutions, Ni3P eutectic structures and Cr-Ni-P compounds. The effects of different factors on the microstructure and properties were studied. The growth rate of solid solution increased first and then decreased with the rise of temperature. The hardness of diffusion zone increased first and then decreased when the brazing temperature went up. Cu played an important role to increase the hardness of brazing seam. Prolonging holding time or reducing the brazing gap width was beneficial for the formation of the solid solution. The hardness increased with the extension of holding time. The brazing gap had little effect on hardness. The fracture mode of the joint was ductile fracture. The joints had higher strength when the brazing temperature increased.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Jewkes · 1969
2. Microstructural characterization in diffusion bonded TiC-Al2O3/Cr18-Ni8 joint with Ti interlayer10.1007/BF02704608 ↗
3. Ultrasonic semi-solid coating soldering 6061 aluminum alloys with Sn-Pb-Zn alloys10.1016/j.ultsonch.2016.01.004 ↗
4. Microstructure of Ni–NiCr laminated composite and Cr18–Ni8 steel joint by vacuum brazing10.1016/j.vacuum.2012.05.027 ↗
5. Microstructure and mechanical properties of vacuum brazed martensitic stainless steel/tin bronze by Ag-based alloy10.1016/j.jmatprotec.2017.05.018 ↗
6. Microstructure and phase constitution near interface of Cu/Al vacuum brazing10.1016/j.vacuum.2007.11.007 ↗
7. The influence of rare earth elements on microstructures and properties of 6061 aluminum alloy vacuum-brazed joints10.1016/S0925-8388(02)01117-9 ↗
8. Prediction of primary intermetallic compound formation during interfacial reaction between Sn-based solder and Ni substrate10.1016/S1359-6462(02)00074-X ↗
9. Wide gap brazing of stainless steel to nickel-based superalloy10.1016/S0924-0136(01)00596-9 ↗
10. Strength of stainless steel joint brazed by various nickel-based brazing filler metals. Pre-prints of the national meeting of JWS
11. Microstructural evolution and thermal stress relaxation of Al 2 O 3/1Cr18Ni9Ti brazed joints with nickel foam10.1016/j.vacuum.2017.10.030 ↗
12. Infrared repair brazing of 403 stainless steel with a nickel-based braze alloy10.1007/s11661-002-0185-3 ↗
13. Effect of mechanical vibration on TLP brazing with BNi-2 nickel-based filler metal10.1023/A:1006762730197 ↗
14. Effects of interfacial reaction and atomic diffusion on the mechanical property of Ti 3 SiC 2, ceramic to Cu brazing joints10.1016/j.vacuum.2016.05.002 ↗
15. Phase-structures and micro-hardness of vacuum brazed joint of pure Ni with BNi7+Cu9% solder
16. The effect of metal filler on structure formation of composite materials10.1007/s10717-005-0103-4 ↗
17. Prediction of the mechanical behavior of flax polypropylene composites based on multi-scale finite element analysis
18. Microstructure and microhardness of 316L stainless steel joint seam vacuum brazed by BNi7 Ni-Based filler metal
19. Investigation of tungsten/steel brazing using Ta and Cu interlayer10.1016/j.fusengdes.2016.11.004 ↗
20. Brazing of stainless steels using Cu-Ag-Mn-Zn braze filler: studies on wettability, mechanical properties, and microstructural aspects10.1016/j.matdes.2017.02.057 ↗