Stability and process parameter optimization for a vertical rotating ZnO-MOCVD reaction chamber
Source abstract
Abstract
Abstract Developing an understanding of the cavity stability underlying the metalorganic chemical vapor deposition (MOCVD) of ZnO is critical to the fabrication of oxide-based devices. Therefore, computational fluid dynamics (CFD) was used to study the process parameters (e.g., the growth temperature, total gas flow, chamber pressure, and substrate speed) of the MOCVD H-type reaction chamber for four states in the cavity: buoyancy-induced flow, plug flow, rotating-plug flow, and rotating flow. Based on these states, criteria for determining stable and unstable flows were determined. These can be presented on the pressure–rotation rate spectrum, which can be used to visualize the effects of specific process parameters on the flow stability. In order to obtain a good film deposition rate in the stable flow state of the cavity, a response surface model and genetic algorithm were also used to optimize the process parameters. The coefficient of variation of the optimized ZnO film was reduced to 2%, which greatly improved the film quality. This study provides a comprehensive insight into the transport phenomena of the MOCVD H-type reaction chamber, including coupled heat and mass transfer and chemical reactions, and presents the optimal combination of parameters to provide a useful reference for obtaining high-quality thin films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Fluid Dynamics and Thin Films · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Ultraviolet spontaneous and stimulated emissions from ZnO microcrystallite thin films at room temperature10.1016/S0038-1098(97)00216-0 ↗
2. Will UV lasers beat the blues?10.1126/science.276.5314.895 ↗
3. Fabrication and optoelectronic properties of a transparent ZnO homostructural light-emitting diode10.1143/JJAP.40.L177 ↗
4. Near-UV emitting diodes based on a transparent p-n Junction composed of heteroepitaxially grown p-SrCu2O2 and n-ZnO10.1016/S0022-0248(01)01951-0 ↗
5. Fabrication and charaterization of n-ZnO/p-ALGaN heterojunction light-emitting diodes on 6H-SiC substrates10.1063/1.1632537 ↗
6. Repeated temperature modulation epitaxy for p-type doping and light-emitting diode based on ZnO10.1038/nmat1284 ↗
7. ZnO p-n junction light-emitting diodes fabricated on sapphire substrates10.1063/1.2166686 ↗
8. Electroluminescence at 375 nm from a ZnO/GaN: Mg/c-Al203 heterojunction light emitting diode10.1063/1.2195009 ↗
9. Blue-yellow ZnO homostructural light-emitting diode realized by metalorganic chemical vapor deposition technique10.1063/1.2169908 ↗
10. Ultraviolet electroluminescence from ZnO/p-Si heterojunctions10.1063/1.2464185 ↗
11. Visual-infrared electroluminescence emission from ZnO/GaAs heterojunctions grown by metal-organic chemical vapor deposition10.1063/1.2748093 ↗
12. Ultraviolet electroluminescence from n-ZnO: Ga/p-ZnO: N homojunction device on sapphire substrate with p-type ZnO: N layer formed by annealine in N2O plasma ambient10.1016/j.cplett.2008.06.039 ↗
13. Room temperature electroluminescence from ZnO/Si heterojunction devices grown by metal-organic chemical vapor deposition10.1016/j.jlumin.2008.08.012 ↗
14. Homojunction photodiodes based on Sb-doped p-type ZnO for ultraviolet detection
15. Comparison of ZnO metal–oxide–semiconductor field effect transistor and metal–semiconductor fieldeffect transistor structures grown on sapphire by pulsed laser deposition10.1116/1.1924613 ↗
16. Recent progress in processing and properties of ZnO
17. Hydrogen-selective sensing at room temperature with ZnO nanorods
18. High-performance ZnO nanowire field effect transistors10.1063/1.1836870 ↗
19. Fabrication and electrical characteristics of high-performance ZnO nanorod field-effect transistors10.1002/adma.200401732 ↗
20. ZnO thin films deposited on various LiNbO 3 substrates by RF-sputtering10.1016/S0169-4332(00)00750-9 ↗
21. Comparison between ZnO films grown by femtosecond and nanosecond laser ablation10.1063/1.1426250 ↗
22. Growth of ZnO thin film by laser MBE: lasing of exciton at room temperature10.1002/1521-3951(199708)202:2<669::AID-PSSB669>3.0.CO;2-T ↗
23. Aluminum-doped zinc oxide transparent conductors deposited by the sol-gel process10.1016/0040-6090(94)90653-X ↗
24. Growth of pure ZnO thin films prepared by chemical spray pyrolysis on silicon10.1016/S0022-0248(02)01917-6 ↗
25. Selective MOCVD growth of ZnO nanotips10.1109/TNANO.2003.809120 ↗
26. Design and verification of nearly ideal flow and heat transfer in a rotating disk chemical vapor deposition reactor10.1149/1.2085878 ↗
27. The scaling of CVD rotating disk reactors to large sizes and comparison with theory10.1007/BF02655388 ↗
28. Fundamental kinetics determining growth rate profiles of InP and GaAs in MOCVD with horizontal reactor10.1016/j.jcrysgro.2003.11.024 ↗
29. A numerical study on heat transfer and film growth rate of InP and GaAs MOCVD process10.1016/j.jcrysgro.2004.12.082 ↗
30. Nonlinear kinetics of GaAs MOVPE examined by selective area growth technique10.1149/1.2400603 ↗
31. Kinetic studies on thermal decomposition of MOVPE sources using fourier transform infrared spectroscopy10.1016/S0169-4332(97)80176-6 ↗
32. Complex flow and gas-phase reactions in a horizontal reactor for GaN meteor ganic vapor phase expitaxy10.1143/JJAP.39.6180 ↗
33. Design of gas inlets for the growth of gallium nitride by metalorganic vapor phase epitaxy10.1016/S0022-0248(00)00402-4 ↗
34. An overview of gallium nitride growth chemistry and its effect on reactor design: application to a planetary radial-flow CVD system10.1016/j.jcrysgro.2005.09.050 ↗
35. Growth conditions and surface morphology of AlN MOVPE10.1016/j.jcrysgro.2008.07.098 ↗
36. A reaction-transport model for AlGaN MOVPE growth10.1016/S0022-0248(98)00649-6 ↗
37. Modeling and experimental analysis of AlGaN MOVPE in commercial vertical high-speed rotating-disk reactors10.1016/j.jcrysgro.2003.11.011 ↗
38. Properties of zinc oxide films prepared by the oxidation of diethyl zinc10.1063/1.328618 ↗
39. Molecular orbital studies of zinc oxide chemical vapor Deposition: gas-phase hydrolysis of diethyl zinc, elimination reactions, and formation of dimers and tetramers10.1021/cm020726p ↗
40. Growth mechanism of atomic layer deposition of zinc oxide: a density functional theory approach10.1063/1.4852655 ↗
41. Homogeneous decomposition mechanisms of diethylzinc by Raman spectroscopy and quantum chemical calculations10.1021/jp7103787 ↗
42. Investigation on reaction pathways for ZnO formation from diethylzinc and water during chemical vapor deposition
43. Chemical vapor reactions of ZnO growth by metal-organic vapor phase epitaxy10.1016/j.jcrysgro.2006.04.117 ↗
44. Parametric studies of III-nitride MOVPE in commercial vertical high-speed rotating disk reactors10.1016/j.jcrysgro.2004.02.066 ↗
45. On the flow stability in vertical rotating disc MOCVD reactors under a wide range of process parameters10.1016/j.jcrysgro.2005.10.131 ↗
46. Process conditions optimization for the maximum deposition rate and uniformity in vertical rotating disc MOCVD reactors based on CFD modeling10.1016/j.jcrysgro.2006.11.247 ↗
47. Transport phenomena and the effects of reactor geometry for epitaxial GaN growth in a vertical MOCVD reactor10.1016/j.jcrysgro.2015.09.003 ↗
48. Influencing factors of GaN growth uniformity through orthogonal test analysis10.1016/j.applthermaleng.2015.08.007 ↗
49. Species transport and chemical reaction in a MOCVD reactor and their influence on the GaN growth uniformity10.1016/j.jcrysgro.2016.09.010 ↗
50. Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing10.1016/j.icheatmasstransfer.2017.06.007 ↗
51. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel10.1016/j.ijheatmasstransfer.2016.08.049 ↗
52. Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron10.1016/j.ijheatmasstransfer.2017.04.055 ↗
53. Hydrodynamic description of CVD processes10.1016/0040-6090(77)90099-2 ↗
54. Kleijn · 1993 · 19
55. Co-evolving parasites improve simulated evolution as an optimization procedure
56. 2D shape optimization under proximity constraints by CFD and response surface methodology