journal article·2013-02

Suitability evaluation of plasma ion beam sputtered TiN/TiOxNy multilayers on steel for bio implants

B. Subramanian, R. Ananthakumar, S. Yugeswaran, M. Jayachandran, M. Takahashi, Akira Kobayashi

Vacuum· Volume 88
Publisher page

Abstract

Abstract Layers of TiN/TiO x N y were coated onto 316L stainless steel substrates by plasma ion sputtering technique. The layers were sputtered with the arc current of 2.5 A and with an acceleration voltage of 1000 V, for a sputtering time of 120 min. The XPS survey spectra on the surface of coatings showed the characteristic Ti2p, N1s and O1s peaks at the corresponding binding energies. X-ray diffraction and TEM-SAD analysis showed mixed oxynitride phase with TiO 2 and TiN for TiN/TiO x N y multilayer coatings. Cross sectional HRTEM analysis indicated the columnar structure of the coatings. Nanohardness value of 29 GPa was observed for mulilayered coatings. The electrochemical impedance measurements showed that the TiN/TiO x N y coatings on 316L SS exhibited superior corrosion resistance compared to the single layers and the bare 316L SS substrate in simulated bodily fluid solution. Platelet adhesion experiments were done to examine the interaction between blood and the materials in-vitro.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Surface engineering of titanium by collagen immobalization surface characterization and in vitro and in vivo studies10.1016/S0142-9612(03)00360-0 ↗
2. Single layer and multilayer wear resistant coatings of (Ti, Al)N: a review10.1016/S0921-5093(02)00259-9 ↗
3. Structural characterizations of magnetron sputtered nanocrystalline TiN thin films10.1016/j.matchar.2007.08.017 ↗
4. Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere10.1016/j.apsusc.2007.03.062 ↗
5. Resistivities of titanium nitride films prepared onto silicon by an ion beam assisted deposition method10.1088/0022-3727/37/7/023 ↗
6. The electrochemical corrosion behavior of TiN and (Ti, Al)N coatings in acid and salt solution10.1016/S0010-938X(02)00223-8 ↗
7. Characterization of AgInSe2 films deposited by hot-wall vacuum evaporation method10.1080/10426910903367360 ↗
8. Structural and tribological properties of DC reactive magnetron sputtered titanium/titanium nitride (Ti/TiN) multilayered coatings10.1016/j.surfcoat.2010.12.016 ↗
9. Corrosion resistance of single TiN layers, Ti/TiN bilayers and Ti/TiN/Ti/TiN multilayers on iron under a salt fog spray (phohesion) test: an evaluation by XPS10.1002/(SICI)1096-9918(199902)27:2<71::AID-SIA469>3.0.CO;2-G ↗
10. Properties of titanium based hard coatings deposited by the cathodic arc method I. Microchemical and microstructural characteristics
11. Raman microscopic studies of PVD hard coatings10.1016/S0257-8972(99)00072-9 ↗
12. Infrared – active defects in a TiO2 mixture of coexisting anatase and rutile phases10.1002/pssa.200306734 ↗
13. Cullite · 1978
14. Imaging microtubules and kinesin decorated microtubules using tapping mode atomic force microscopy in fluids10.1007/s002490050001 ↗
15. Haemocompatibility of DLC and TiC–TiN interlayers on titanium10.1016/S0925-9635(98)00426-9 ↗