journal article·2015-05

The effect of oxygen partial pressure on the properties of CuFeO2 thin films prepared by RF sputtering

Zanhong Deng, Xiaodong Fang, Suzhen Wu, Shimao Wang, Weiwei Dong, Jingzhen Shao, Ruhua Tao

Vacuum· Volume 115
Publisher page

Abstract

Abstract Single phase CuFeO 2 thin films with c-axis orientation were prepared by RF sputtering method at room temperature under oxygen partial pressure P O from 5% to 15% and then post annealed at 900 °C for 4 h in flowing N 2 atmosphere. The grains of the films show layer-by-layer structure and are closely gathered and densely arranged. The E g at near-UV region shows a redshift with increment of P O which may due to the impurity levels induced by oxygen interstitials. The resistivity of the films first decreased and then increased with increasing P O . The minimum resistivity of 0.32 Ωcm at room temperature for the sample 10%-PA is nearly two-order magnitude smaller than that (18 Ωcm) for 5%-PA. Oxygen interstitial doping can effectively enhance the conductivity of CuFeO 2 thin films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Oxygen storage capacity of CuMO2 (M = Al, Fe, Mn, Ga) with a delafossite-type structure10.1016/j.apcatb.2008.11.033 ↗
2. NO3− removal with a new delafossite CuCrO2 photocatalyst10.1016/j.desal.2008.05.020 ↗
3. Photocatalytic reduction of cadmium over CuFeO2 synthesized by sol–gel10.1016/j.jphotochem.2008.09.015 ↗
4. Room temperature ozone sensing properties of p-type CuCrO2 nanocrystals10.1016/j.snb.2009.09.026 ↗
5. Room temperature sensing of ozone by transparent p-type semiconductor CuAlO210.1063/1.1784888 ↗
6. Magnetic and electrical properties of p-type Mn-doped CuCrO2 semiconductors
7. Fe concentration dependences of microstructure and magnetic properties for Cu(Cr1−xFex)O2 ceramics10.1016/j.jallcom.2013.02.161 ↗
8. Optical bandgap modulation and magnetic characterization of Fe-doped CuCrO2 nanopowders10.1016/j.jallcom.2012.03.059 ↗
9. Evidence of room temperature ferromagnetism in Co-doped transparent CuAlO2 semiconductor10.1016/j.jallcom.2011.09.062 ↗
10. Color tunable light-emitting diodes based on nanorod array heterojunctions10.1063/1.3459963 ↗
11. P-type electrical conduction in transparent thin films of CuAlO210.1038/40087 ↗
12. Characterization of transparent conductive delafossite-CuCr1−xO2 films10.1016/j.apsusc.2013.02.038 ↗
13. Effects of citric acid on properties of single phase CuAlO2 thin films derived by chemical solution deposition10.1016/j.jallcom.2009.07.149 ↗
14. Chemistry of noble metal oxides. III. electrical transport properties and crystal chemistry of ABO2 compounds with the delafossite structure10.1021/ic50098a013 ↗
15. Structural, magnetic, and ferroelectric properties of CuFe1−xMnxO210.1103/PhysRevB.87.064418 ↗
16. Multiferroic phase of doped delafossite CuFeO2 identified using inelastic neutron scattering
17. Spin dynamics of triangular lattice antiferromagnet CuFeO2 crossover from spin-liquid to paramagnetic phase10.1103/PhysRevB.80.144413 ↗
18. Spin-wave dynamics for the high-magnetic-field phases of the frustrated CuFeO2 antiferromagnet predictions for inelastic neutron scattering10.1103/PhysRevB.86.024412 ↗
19. Opto-electronic properties of p- and n-type delafossite, CuFeO210.1016/0022-3697(87)90103-X ↗
20. Synthesis and characterization of CuFeO2+δ delafossite powders10.1016/j.ssi.2005.11.026 ↗
21. Epitaxial growth of delafossite CuFeO2 thin films by pulse laser deposition10.1016/j.tsf.2009.01.111 ↗
22. Epitaxial growth of delafossite CuFeO2 thin films by pulse laser deposition10.1016/j.physb.2012.03.037 ↗
23. Preparation of delafossite CuFeO2 thin films by rf-sputtering on conventional glass substrate10.1016/j.matlet.2006.03.033 ↗
24. Transparent conductive CuFeO2 thin films prepared by sol–gel processing10.1016/j.apsusc.2012.01.022 ↗
25. Chemical solution deposition and transport properties of epitaxial CuFeO2 thin films10.1016/j.matlet.2011.07.018 ↗
26. Electrochemical synthesis of p-type CuFeO2 electrodes for use in a photoelectrochemical cell10.1021/jz300709t ↗
27. Copper and iron based thin film nanocomposites prepared by radio-frequency sputtering. Part II: elaboration and characterization of oxide/oxide thin film nanocomposites using controlled ex-situ oxidation process10.1007/s10853-012-7116-5 ↗
28. Influences of post-annealing conditions on the formation of delafossite-CuFeO2 thin films10.1016/j.apsusc.2013.10.017 ↗
29. Delafossite–CuFeO2 thin films prepared by atmospheric pressure plasma annealing10.1016/j.matlet.2014.01.017 ↗
30. Structure and optoelectronic properties of Mg-doped CuFeO2 thin films prepared by sol-gel method10.1016/j.jallcom.2013.06.155 ↗
31. Electronic structure and optical properties of AFeO2 (A = Ag, Cu) within GGA calculations10.1021/cm062481c ↗
32. Energy band engineering and controlled p-type conductivity of CuAlO2 thin films by nonisovalent Cu-O alloying10.1063/1.3683499 ↗