Monocrystalline-like silicon solar cells fabricated by wet and dry texturing processes for improving light-trapping effect
Source abstract
Abstract
Abstract Surface texturing techniques of crystalline silicon (Si) wafers are an effective and permanent method for increases in the conversion efficiency of solar cells by reducing reflection losses and improving light trapping effects compared to antireflection coatings such as hydrogenated silicon nitride (SiNx:H) thin films. In this study, monocrystalline-like Si surfaces were textured by acidic solutions followed by reactive ion etching (RIE). Also, we investigated the optical and electrical properties of Si surfaces prepared by different texturing processes. By using the acidic and RIE texturing processes for monocrystalline-like Si surfaces, we achieved open circuit voltage (V oc ), short circuit current density (J sc ), fill factor (FF) and conversion efficiency as high as 633 mV, 36.7 mA/cm 2 , 77.5% and 18%, respectively, in a solar cell with an active surface area of 156 × 156 mm 2 (243 cm 2 ). Compared to the conventional acidic texturing, the acidic and RIE texturing of front Si surfaces improved the solar cell conversion efficiency of 0.9%. Therefore, the results indicate that large-area monocrystalline-like Si solar cells with high efficiency can be fabricated by standard wet chemical and additional RIE texturing processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Gas flow effect on global heat transport and melt convection in czochralski silicon growth10.1016/S0022-0248(02)02109-7 ↗
2. Degradation of carrier lifetime in Cz silicon solar cells10.1016/S0927-0248(00)00098-2 ↗
3. Comparison of the predictions from 3D numerical simulation with temperature distributions measured in Si czochralski melts under the influence of different magnetic fields10.1016/S0022-0248(01)01347-1 ↗
4. Hydrodynamical aspects of the floating zone silicon crystal growth process10.1016/j.jcrysgro.2013.12.066 ↗
5. Precipitates caused by prolonged high-temperature annealing in floating zone silicon wafer grown from czochralski single-crystal rod10.1016/j.mssp.2013.01.020 ↗
6. Feasibility of directional solidification of silicon ingot by electromagnetic casting10.1016/j.mssp.2011.12.006 ↗
7. Problems and recent advances in melt crystal growth technology10.1016/j.jcrysgro.2011.11.049 ↗
8. Relationship between dislocation density and nucleation of multicrystalline silicon10.1016/j.actamat.2010.01.042 ↗
9. Spatially resolved modeling of the combined effect of dislocations and grain boundaries on minority carrier lifetime10.1063/1.2435815 ↗
10. Structural and electrical charaterization of crystallographic defects in silicon ribbons10.1016/0022-0248(80)90252-3 ↗
11. Metal precipitation at grain boundaries in silicon: dependence on grain boundary character and dislocation decoration10.1063/1.2234570 ↗
12. Electrical and structural properties of polycrystalline silicon10.1063/1.373475 ↗
13. Casting single crystal silicon: novel defect profiles from BP solars Mono2TM wafers10.4028/www.scientific.net/SSP.131-133.1 ↗
14. Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells10.1002/pip.1221 ↗
15. Control of grain boundary propagation in mono-like Si: utilization of functional grain boundaries10.7567/APEX.6.025505 ↗
16. Optimizing seeded casting of mono-like silicon crystals through numerical simulation10.1016/j.jcrysgro.2012.04.033 ↗
17. Reduction of polycrystalline grains region near the crucible wall during seeded growth of monocrystalline silicon in a unidirectional solidification furnace10.1016/j.jcrysgro.2011.11.084 ↗
18. Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells10.1016/j.solmat.2012.01.024 ↗
19. Low temperature reactive ion etching of silicon with SF6/O2 plasmas10.1116/1.589333 ↗
20. Surface texturing for silicon solar cells using reactive ion etching technique
21. Chemistry studies of SF6/CF4, SF6/O2 and CF4/O2 gas phase during hollow cathode reactive ion etching plasma10.1016/j.vacuum.2014.03.003 ↗
22. Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing10.1016/j.solmat.2014.04.001 ↗
23. Anisotropic etching of silicon in SF6 plasma10.1016/j.vacuum.2004.07.063 ↗
24. Plasma surface texturization for multicrystalline silicon solar cells