Electron microscopy study on grain boundary characterizations of Fe–Co–V alloy during annealing
Source abstract
Abstract
Abstract The present study investigates the microstructure and grain boundaries evolutions during recrystallization of commercial FeCo-∼7 wt.% V. The resulting microstructures were characterized using electron back scatter diffraction after annealing at different temperatures. At low temperatures (∼400 °C), where only recovery occurs during annealing, the fraction of low angle boundaries was increased. But, at high temperatures (∼850 °C), where recrystallization occurs during annealing, the fraction of high angle boundaries and low-Σ coincidence site lattice (CSL) boundaries (especially Σ3) were increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Influence of annealing treatment on micro/macrotexture and texture dependent magnetic properties in cold rolled FeCo-7.15V alloy10.1016/j.jmmm.2014.11.050 ↗
2. Non-isothermal kinetic analysis on the phase transformations of Fe–Co–V alloy10.1016/j.tca.2014.09.020 ↗
3. Effect of recrystallization and degree of order on the magnetic and mechanical properties of soft magnetic FeCo-2V alloy10.1016/j.msea.2013.04.066 ↗
4. Effect of long range order on mechanical properties of partially recrystallized Fe49Co-2V alloy10.1016/j.msea.2013.10.093 ↗
5. Effect of additive elements on cold workability in FeCo alloys10.1007/BF00542066 ↗
6. Influence of alloying elements on the mechanical properties of FeCo–V alloys10.1016/j.intermet.2004.02.022 ↗
7. Effect of cold rolling on the mechanical properties of an FeCo-2V alloy10.1007/BF00544172 ↗
8. Structures and mechanical properties of an FeCo-2V alloy10.1007/BF00544171 ↗
9. On the role of atomic ordering in the formation of a high coercivity state in iron-cobalt-vanadium alloys10.1134/S0031918X12010152 ↗
10. Tumanski · 2011
11. Study of Co–Fe–V permanent magnet alloys (vicalloys)10.1007/BF00550114 ↗
12. Dependence of the magnetic anisotropy on the alloy composition in cold-rolled vicalloy magnet
13. Chemical synthesis, structure and magnetic properties of nanocrystalline Fe–Co alloys10.1016/j.matlet.2012.01.090 ↗
14. Evolution of strength and coercivity during annealing of FeCo based alloys10.1016/j.scriptamat.2004.05.028 ↗
15. Nano/sub-micron crystallization of Fe-Co-7.15V alloy by thermo-mechanical process to improve magnetic properties10.1016/j.mseb.2014.09.013 ↗
16. Pinning effect of the grain boundaries on magnetic domain wall in FeCo-based magnetic alloys10.1063/1.370175 ↗
17. Magnetic domains and coercivity in FeCo soft magnetic alloys10.1063/1.369073 ↗
18. Magnetic evidence for structural-phase transformations in Fe–Co alloy nanocrystals produced by a carbon arc10.1063/1.364887 ↗
19. Iron-cobalt-vanadium alloys: a critical study of the phase diagrams in relation to magnetic properties10.1109/TMAG.1974.1058300 ↗
20. Influence of annealing temperature and time on hysteresis parameters and microstructure of an Fe/Co/V alloy10.1109/TMAG.1975.1058770 ↗
21. Phase characterization in the Fe–Co–V and Fe–Co–Nb systems10.1007/BF02395880 ↗
22. Near equiatomic FeCo alloys: constitution, mechanical and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
23. High temperature soft magnetic materials: FeCo alloys and composites10.1109/20.908809 ↗
24. Control of brittleness and development of desirable mechanical properties in polycrystalline systems by grain boundary engineering10.1016/S1359-6454(99)00275-X ↗
25. Improving the weld ability and service performance of nickel and iron-based superalloys by grain boundary engineering10.1007/s11661-998-0214-y ↗
26. Grain boundary character distribution control to inhibit cavitation in superplastic P/M747510.1016/S1359-6462(03)00434-2 ↗
27. A study of low-strain and medium-strain grain boundary engineering10.1016/j.actamat.2009.04.002 ↗
28. Effect of grain boundary engineering on microstructural stability during annealing10.1016/j.scriptamat.2009.03.013 ↗
29. On the role of iterative processing in grain boundary engineering10.1016/j.scriptamat.2006.04.049 ↗
30. Grain boundary engineering based on fractal analysis for control of segregation-induced intergranular brittle fracture in polycrystalline nickel10.1016/j.actamat.2012.07.065 ↗
31. Reversed anisotropy of grain boundary properties and its effect on grain boundary engineering10.1016/j.actamat.2009.11.036 ↗
32. Grain boundary engineering of 304 austenitic stainless steel by laser surface melting and annealing10.1007/s10853-006-0063-2 ↗
33. Ordering and recrystallisation in Fe-50Co-0.4%Cr10.1179/msc.1979.13.2.67 ↗
34. Ordering transformations in Fe-50Co based alloys
35. Humphres · 2005
36. EBSD study on grain boundary characteristics in fine-grained Al alloys10.1016/S1359-6462(00)00393-6 ↗