journal article·2012-02

Morphology control of barium ferrite thin films

Wenxu Zhang, Fang Li, Hao Tang, Bin Peng, Wanli Zhang

Vacuum· Volume 86· Issue 7
Publisher page

Abstract

Abstract Hexagonal barium ferrite thin films were fabricated by spin coating of precursors obtained by sol-gel methods onto sapphire (00l) faces. Citric acid and ethylenediaminetetraacetic acid (EDTA) were used to tune the morphology of the films. The films show texture with c-axis normal to the film plane as shown by the strong x-ray diffractions from the (001) plane with full width at half maximum of the rocking curves about 0.4°. The [100] direction of the film is parallel to the [110] direction of the sapphire. With the increase of the citric acid, the percentage of the acicular crystallites increased. EDTA can be used to produce films with the best texture where faceted grains were obtained. The maximum coercive force obtained was about 302 kA/m.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Multiferroics and related materials · Magnetic Properties and Synthesis of Ferrites · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Harris · J Appl Phys · 2006 · 99 · 08M91110.1063/1.2165145 ↗
2. Song · Appl Phys Lett · 2009 · 94 · 18250510.1063/1.3131042 ↗
3. Gee · IEEE Trans Magn · 2005 · 41 · 435310.1109/TMAG.2005.855248 ↗
4. Tang · Thin Solid Films · 2010 · 518 · 334210.1016/j.tsf.2010.01.038 ↗
5. Hylton · Appl Phys Lett · 1992 · 61 · 86710.1063/1.107772 ↗
6. Kakihana · J. Sol-Gel Sci. Tech · 1996 · 6 · 710.1007/BF00402588 ↗