Chromium-based thin sputtered composite coatings for solar thermal collectors
Source abstract
Abstract
Abstract One of the fundamental components of a solar thermal collector is the absorber surface that should be spectrally selective for solar radiation. Efficient solar photothermal conversion benefits from spectrally selective absorber surfaces. Most solar selective coatings use metal-dielectric composites, known as cermets, as the absorber of solar energy. In this study we will present a numerical model that allow us to correlate the selectivity of the produced absorbers to the collector efficiency. The cathodic magnetron sputtering being a promising method to produce thin solar selective films, a study of some cermet Cr–Cr2O3–CrO3 coatings obtained by this technique in reactive atmosphere and using a DC power unit will be presented. The multilayered composites produced were based in metallic chromium in a matrix of a chromium oxide with a gradient in oxygen composition. The selective graded films were produced by a reactive DC magnetron sputtering of pure chromium target in a plasma of argon–oxygen at different sputtering pressures and substrate temperatures. The microstructure, surface roughness, crystallographic phases, composition and chemical analysis by X-ray photoelectron spectroscopy and reflectivity spectra in vis-NIR were analysed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Seraphin · 1979
2. Sella · Appl Surf Sci · 1988 · 33/34 · 94210.1016/0169-4332(88)90402-3 ↗
3. Costa MFM, Teixeira V, Nunes C. Microtopographic inspection of Cr–Cr2O3 cermet solar absorbers Proceedings of SPIEs 44th Annual Meeting and Exhibition Optical Science Engineering, and Instrumentation Symposium, Solar Optical Materials XVI, SPIE-vol. 3789, 1999. p.140–8.10.1117/12.367561 ↗
4. Zhang · Sol Energy Mater Sol Cells · 1992 · 27 · 27310.1016/0927-0248(92)90089-8 ↗
5. Suzer · Sol Energy Mater Sol Cells · 1998 · 52 · 5510.1016/S0927-0248(97)00270-5 ↗
6. Teixeira V, Sousa E, Monteiro A, Costa MF, Roman E, Gago J. Deposition of Mo–Al2O3 cermet spectrally selective films by magnetron sputtering, presented in RIVA IV. Fourth Iberian Meeting of Vacuum and Applications, Avila, Spain, 13–15 July, 2000, Vacuum 2001, in press.
7. Ari · 1985
8. The equivalence of outdoor mixed indoor/outdoor solar collector testing10.1016/0038-092X(80)90088-2 ↗
9. John A, Duffie W, Beckman A. Solar engineering of thermal processes. New York: Wiley, 1980.
10. Ohring M. The materials science of thin films. London: Academic Press Inc., 1992.10.1016/B978-0-08-051118-4.50012-8 ↗
11. Gall · J Vac Sci Technol A · 1996 · 14 · 37410.1116/1.580092 ↗
12. Thornton · Ann Rev Mater Sci · 1977 · 20 · 23910.1146/annurev.ms.07.080177.001323 ↗
13. Gao · Vacuum · 2000 · 56 · 14310.1016/S0042-207X(99)00199-2 ↗
14. Teixeira V, Andritschky M. Multicomponents multilyered thin films for advanced microtechnologies: techniques fundamentals devices. NATO Series E—Applied Sciences, vol. 234. Dordrecht: Kluwer Academic Publication, 1992. p. 121–7.
15. Andritschky · Vacuum, · 1992 · 43 · 45510.1016/0042-207X(92)90055-2 ↗
16. V. Teixeira V, et al., Spectrally selective composite coatings for solar energy applications. Proceedings of the third ICCG-International Conference on Coatings on Glass, TNO-TPD, Maastricht, Holland, 2000. p. 647–57.
17. Teixeira · High Temperatures–High Pressures · 1993 · 25 · 213