Design and fabrication of a differential pressure MEMS capacitance diaphragm gauge based on heavily boron-doping technique
Source abstract
Abstract
Abstract In this paper, a differential pressure MEMS CDG with a full range of (5–4000) Pa has been developed, and its pressure-sensing diaphragm is manufactured by boron-doping technique. The design principle and manufacturing process of the MEMS CDG were demonstrated in detail. To test the working performance of the CDG, a differential pressure high vacuum pumping system and a precision LCR meter are adopted to obtain the capacitance value of the vacuum gauge varying with pressure. The test results show that the MEMS CDG can work normally in the pressure range of (5–4000) Pa, and the maximum sensitivity is 87.2 fF/Pa. In addition, boron-doped diaphragm can effectively improve the sensitivity of vacuum gauge and further extend its measurement upper limit.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Mechanical and Optical Resonators · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. MEMS capacitive pressure sensors: a review on recent development and prospective[J]
2. Miniature and MEMS-type vacuum sensors and pumps10.1016/j.vacuum.2009.05.003 ↗
3. Low power integrated pressure sensor system for medical applications[J]10.1016/S0924-4247(98)00255-6 ↗
4. Silicon micromachining for integrated microsystems[J]10.1016/0042-207X(96)00003-6 ↗
5. The structures for electrostatic servo capacitive vacuum sensors[J]10.1016/S0924-4247(98)00037-5 ↗
6. Modeling of circular diaphragm and spreadsheet solution programming for touch mode capacitive sensors[J]10.1016/S0924-4247(99)00055-2 ↗
7. Design of pressure-sensing diaphragm for MEMS capacitance diaphragm gauge considering size effect[J]10.1063/1.5021374 ↗
8. A new high precision, broad range gas micro-flow calibration apparatus10.1016/j.vacuum.2019.02.037 ↗
9. A simple method for calculation of the pull-in voltage and touch-point pressure for the small deflection of square diaphragm in MEMS[J]10.1016/j.sna.2007.10.036 ↗
10. Shahiri · 2012
11. Internal stress compensation and scaling in ultrasensitive silicon pressure sensors[J]10.1109/16.127473 ↗
12. A touch mode capacitive pressure sensor with long linear range and high sensitivity[C]
13. Design and experiment of a touch mode MEMS capacitance vacuum gauge with square diaphragm[J]10.1016/j.sna.2020.112154 ↗
14. Comparison of etch characteristics of KOH, TMAH and EDP for bulk micromachining of silicon (110)[J]10.1007/s00542-011-1351-6 ↗
15. Differential pressure design and test of MEMS capacitance diaphragm gauge[J]