journal article·2020-02

Synthesis, structure, and properties of the high Nb–TiAl alloy after Ni coatings by plasma surface alloying technique

Y.R. Wang, K. Zheng, R.Y. Wang, H.J. Hei, Y.S. Wang, J. Gao, Y.F. Liang, Y. Ma, B. Zhou, S.W. Yu, B. Tang, Y.L. Wang, J.P. Lin, Y.C. Wu

Vacuum· Volume 172
Publisher page

Abstract

Abstract Ni coatings were prepared on the high Nb–TiAl alloy by the plasma surface alloying technique. The results found that surface morphology and microstructure exhibited a strong dependence on the deposited temperature. The elements diffusion during the metalizing stage leaded to the high hardness value and adhesion force between the Ni coating and substrate. The corrosion resistance of the Ni-coated specimens depended on the fabrication temperature related to the deposition and diffusion layers. For the oxidation, the weight gain rate was involved in the chemical reaction in the initial oxidation stage. The inter-diffusion among elements such as the nickel, titanium, and aluminum resulted in the high adhesion force after the oxidation, improving the bonding force between the Ni coating and substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. High-temperature structural intermetallics10.1016/S1359-6454(99)00301-8 ↗
2. Intermetallic alloys based on gamma titanium aluminize10.1007/BF03220267 ↗
3. Mechanism of isothermal oxidation of the intermetallic TiAl and of TiAl alloys10.1007/BF00665663 ↗
4. Oxidation behavior of gamma alloys designed for high temperature applications10.1016/j.intermet.2004.12.007 ↗
5. A study of the corrosion behavior of gamma titanium aluminize in 3.5 wt% NaCl solution and seawater10.1016/j.corsci.2007.04.001 ↗
6. Improvement in the oxidation resistance of a γ-TiAl based alloy by sol-gel derived Al2O3 film10.1016/j.apsusc.2008.06.041 ↗
7. Effect of an Al2O3 coating on the oxidation process of a γ-TiAl phase based alloy10.1016/j.corsci.2012.06.009 ↗
8. Improvement in the oxidation resistance of TiAl by pre-oxidation in a SiO2 powder pack10.1007/BF01196645 ↗
9. Influence of electrolyte compositions on structure and high temperature oxidation resistance of micro arc oxidation coatings formed on Ti2AlNb alloy10.1016/j.jallcom.2015.05.154 ↗
10. Cyclic oxidation behavior of a beta gamma powder metallurgy TiAl-4Nb-3Mn alloy coated with a NiCrAlY coating10.1016/j.surfcoat.2011.12.004 ↗
11. Microstructure and oxidation behavior of plasma-sprayed NiCoCrAlY coatings with and without Ta on Ti44Al6Nb1Cr alloys10.1016/j.corsci.2018.03.008 ↗
12. Oxidation behavior of protective Ti-Al-Cr based coatings applied on the γ-TiAl alloys Ti-48-2-2 and TNM-B110.1016/j.surfcoat.2018.05.067 ↗
13. Oxidation performance of cold spray Ti-Al barrier coated γ-TiAl intermetallic substrates10.1016/j.surfcoat.2014.12.004 ↗
14. Ni-doped Al2O3 coatings prepared by cathode plasma electrolysis deposition on Ti-45Al-8.5Nb alloys10.1016/j.apsusc.2018.05.032 ↗
15. High-temperature oxidation resistance of (Al2O3-Y2O3)/(Y2O3-stabilized ZrO2) laminated coating on 8Nb-TiAl alloy prepared by a novel spray pyrolysis10.1016/j.corsci.2013.08.029 ↗
16. Microstructure and oxidation resistance of a NiCrAlY/Al2O3-sprayed coating on Ti-19Al-10Nb-V alloy10.1016/j.ceramint.2016.04.148 ↗
17. Xu · 2017
18. Double glow plasma surface alloying and plasma nitriding10.1016/j.surfcoat.2006.07.187 ↗
19. Isothermal oxidation behavior and microstructure of plasma surface Ta coating on γ-TiAl10.1016/j.matchar.2014.10.014 ↗
20. Corrosion behavior of tantalum alloying on γ-TiAl by double-glow plasma surface metallurgy technique10.1002/sia.6207 ↗
21. Mechanical properties of the Fe-Al-Nb coating by Double glow plasma surface metallurgy10.1142/S0218625X19500343 ↗
22. Oxidation behavior of NiCoCrAlY coatings deposited by double-Glow plasma alloying10.1016/j.apsusc.2017.09.215 ↗
23. Plasma surface tantalum alloying on titanium and its corrosion behavior in sulfuric acid and hydrochloric acid10.1016/j.apsusc.2018.02.058 ↗
24. Preparation and characterization of Cr/CrC multilayer on γ-TiAl alloy by the double glow plasma surface alloying technology10.1016/j.matlet.2017.12.104 ↗
25. Wang · 2005
26. Oxidation behavior of a single- crystal Ni-base superalloy in air at 900, 1000 and 1100 °C10.1007/s11085-006-9016-z ↗
27. Structural, electrochemical and mechanical studies of ultrasonic irradiation enhanced electroplating Ni coating10.1108/ACMM-04-2017-1789 ↗
28. Effect of mechanical attrition on microstructure and property of electroplated Ni coating10.1016/S1003-6326(11)61418-0 ↗
29. Mechanical attrition enhanced Ni electroplating10.1016/j.surfcoat.2007.08.062 ↗
30. The corrosion behavior of Nanocrystalline nickel10.1016/0956-716X(91)90171-V ↗
31. A study of wear and corrosion resistance of arc-sprayed Ni-Ti composite coatings10.1007/s11666-011-9679-0 ↗
32. Corrosion behaviour of thermal sprayed nitinol coatings10.1016/j.corsci.2008.10.022 ↗
33. Study on VPS-cladding of NiAl intermetallics on the TiAl-based intermetallic10.1016/S0010-938X(98)00197-8 ↗
34. Superior long-term oxidation resistance of Ni-Al coated TiAl alloys10.1016/j.intermet.2004.11.006 ↗
35. Ni-Al-Ti coatings obtained by microwave assisted SHS: oxidation behavior in the 750-900°C range10.1016/j.surfcoat.2009.11.018 ↗
36. Oxidation behavior of sputter- deposited Ni-Cr-Al micro-crystalline coatings10.1016/S1359-6454(97)00346-7 ↗
37. Structure and properties of NiTi alloy surface after Mo alloying by double glow plasma process
38. Influences of temperature and discharge pressure on plasma Ni alloying layer of Ti6Al4V
39. Ni3Al4-A phase with ordered vacancies isotopic to Ni3Ga410.1016/0022-5088(89)90185-9 ↗
40. Nash · 1991
41. Barin · 2003
42. Intermetallic-matrix composites: an overview10.1016/0266-3538(94)90200-3 ↗
43. Microstructure and properties of Al2O3(ZrO2)/Pt laminate coatings on Nb-TiAl alloy prepared by sputtering
44. Preparation and properties of micro-arc oxidation film on Ti3Al based alloy
45. Effect of pH on the corrosion behavior of aluminum alloy welded plate in chloride solutions
46. Sun · 2004