Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system
Source abstract
Abstract
Abstract Effect of Ti Content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system are studied. The results show that small additions of Ti in AgCu braze alloys can decrease the final contact angle θF, but the Ti content increases from 2.0 wt % to 7.8 wt %, the contact angle θ changes little. The additions of Ti in AgCu can obviously increase the work of adhesion, as Ti content increase to 2.0 wt %, 4.0 wt % and 7.8 wt %, the increased work of adhesion is 1080 mJm−2 (ΔW1), 1083 mJm−2 (ΔW2) and 1083 mJm−2 (ΔW3), respectively. However,the little changes of the increased work of adhesion for enhancing Ti content in braze alloys are responsible for the tiny change of the final contact angle θF. The results also show that as the Ti content increases, the microstructures in the wetting drop zone change. As the Ti content increases to (4.0, 7.8) wt. %, Ti5Si3 compounds are formed in the wetting drop, which decrease the activity of Ti leading to the little change in spread rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint10.1016/j.vacuum.2017.03.037 ↗
2. Interface evolution of SiO2 glass ceramic and Ti–6Al–4V alloy joint brazed with Ag-Cu-Ti alloy10.1179/026708309X12506933873026 ↗
3. Active metal brazing of SiO2–BN ceramic and Ti plate with Ag-Cu-Ti + BN composite filler10.1016/j.jmst.2017.04.005 ↗
4. Wetting of AgCu-Ti filler on porous Si3N4 ceramic and brazing of the ceramic to TiAl alloy10.1016/j.ceramint.2017.11.212 ↗
5. Microstructure andmechanical response of the SiO2f/SiO2 composite and Invar alloy joints brazed with an AgCuTi alloy10.1016/j.matdes.2016.08.075 ↗
6. Brazing SiO2f/SiO2 composite to Invar alloy using a novel TiO2 particle-modified composite braze filler10.1016/j.ceramint.2018.10.052 ↗
7. Microstructure and brazing mechanism of porous Si3N4/Invar jointbrazed with Ag-Cu-Ti/Cu/Ag-Cu multi-layered filler10.1016/j.jmst.2017.07.001 ↗
8. Interfacial reactions between sapphire and Ag–Cu–Ti-based active braze alloys10.1016/j.actamat.2015.11.019 ↗
9. In situ observation of Ag–Cu–Ti liquid alloy/solid oxide interfaces10.1016/j.msea.2007.10.098 ↗
10. The role of adsorption and reaction in wetting in the CuAg–Ti/alumina system10.1016/j.scriptamat.2004.05.002 ↗
11. The relation between wetting and interfacial chemistry in the CuAgTi/alumina system10.1016/j.actamat.2005.11.048 ↗
12. Nanostructure of wetting triple line in a Ag–Cu–Ti/Si3N4 reactive system10.1016/S1359-6454(98)00375-9 ↗
13. Effect of Ti content on the wetting behavior of Sn0.3Ag0.7Cu/AlN system10.1016/j.matdes.2016.11.041 ↗
14. Effect of Ti addition on the wetting and brazing of Sn0.3Ag0.7Cu filler on SiC ceramic
15. Wetting and interfacial behavior of Sn–Ti alloys on zirconia10.1007/s10853-018-2829-8 ↗
16. Ba · Ceram. Int. · 2019 · 45 · 805410.1016/j.ceramint.2019.01.091 ↗
17. Control interfacial microstructure and improve mechanical properties of TC4-SiO2f/SiO2 joint by AgCuTi with Cu foam as interlayer10.1016/j.ceramint.2016.07.084 ↗
18. Interfacial microstructures formation mechanism between SiO2 substrate and AgCuTi braze alloys10.1016/j.ceramint.2018.06.246 ↗
19. C/SiC composite-Ti6Al4V joints brazed with negative thermal expansion ZrP2WO12 nanoparticle reinforced AgCu alloy10.1016/j.jeurceramsoc.2018.12.028 ↗
20. Correlation between the mechanical properties and the microstructural behaviour of Al2O3–(Ag–Cu–Ti) brazed joints10.1016/j.msea.2004.06.002 ↗
21. Progress in understanding and modeling reactive wetting of metals on ceramics10.1016/j.cossms.2006.04.004 ↗
22. Precursor film of tin-based active solder wetting on ceramics10.1007/BF00400889 ↗
23. Contribution to the study of reactive wetting in the CuTi/Al2O3 system10.1007/BF01124693 ↗
24. Surface tension and density in liquid Ag–Cu–Sn alloys10.1016/j.jnoncrysol.2007.05.136 ↗
25. Progress in modelling of chemical-reaction limited wetting10.1016/S0955-2219(03)00291-7 ↗