Microstructures and tribological behaviour of oxynitrided austenitic stainless steel
Source abstract
Abstract
Abstract This study investigates the microstructures and tribological behaviour in the modified layers of AISI 304 steel produced by active screen plasma oxynitriding. Compositional analysis of modified layers was carried out by field emission scanning electron microscopy, atomic force microscopy and high-resolution transmission electron microscopy. The results demonstrated that the modified composite duplex layer consisted of an amorphous and nanocrystalline oxynitrided layer (upper layer) and the nitrided layer (lower layer). Additionally, the wear resistance of the active screen plasma oxynitrided specimens was much higher than that of the untreated ones. The wear rate of the treated specimen decreased by approximately 95% compared with that of the untreated one. The analysis of the worn surface indicated that the treated specimen exhibited slight oxidation and abrasive wear, whereas the untreated one showed severe adhesive wear and plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomography10.1016/j.actamat.2011.12.012 ↗
2. Anisotropy changes in hardness and indentation modulus induced by plasma nitriding of 316L polycrystalline stainless steel10.1016/j.scriptamat.2010.08.058 ↗
3. Using of artificial neural network for the prediction of tribological properties of plasma nitrided 316L stainless steel10.1016/j.matlet.2015.06.015 ↗
4. Novel plasma nitriding–oxidizing duplex treatment of AISI 316 austenitic stainless steel10.1016/j.matlet.2009.12.042 ↗
5. Evaluation of nitrogen diffusion in thermo-mechanically nanostructured and plasma nitrided stainless steel10.1016/j.surfcoat.2016.03.058 ↗
6. Microstructural characterization of low temperature plasma-nitrided 316L stainless steel surface with prior severe shot peening10.1016/j.matdes.2016.07.005 ↗
7. Low temperature nitriding of AISI 300 and 200 series austenitic stainless steels10.1016/j.vacuum.2016.02.009 ↗
8. Characteristics of the nitrided layer formed on AISI 304 austenitic stainless steel by high temperature nitriding assisted hollow cathode discharge10.1016/j.matdes.2014.08.023 ↗
9. Ferromagnetism in interstitially hardened austenitic stainless steel induced by low-temperature gas-phase nitriding10.1016/j.scriptamat.2011.09.023 ↗
10. Modeling of the lattice rotations induced by plasma nitriding of 316L polycrystalline stainless steel10.1016/j.actamat.2014.09.052 ↗
11. The wear and corrosion resistance of shot peened–nitrided 316L austenitic stainless steel10.1016/j.matdes.2011.02.037 ↗
12. Enhanced surface properties of plain carbon steel using plasma nitriding with austenitic steel cathodic cage10.1016/j.matdes.2016.07.044 ↗
13. Active screen plasma nitriding of 316 stainless steel for the application of bipolar plates in proton exchange membrane fuel cells10.1016/j.ijhydene.2014.04.102 ↗
14. Active screen plasma nitriding–an overview
15. Use of cathodic cage in plasma nitriding10.1016/j.surfcoat.2006.04.014 ↗
16. Active screen plasma nitriding of Al using an iron cage: characterization and evaluation10.1016/j.vacuum.2015.09.018 ↗
17. Cathodic cage plasma nitriding (CCPN) of austenitic stainless steel (AISI 316): influence of the different ratios of the (N2/H2) on the nitrided layers properties10.1016/j.vacuum.2012.05.008 ↗
18. On the fundamental mechanisms of active screen plasma nitriding10.1016/j.vacuum.2009.07.002 ↗
19. A new method for deposition of nano sized titanium nitride on steels10.1016/j.vacuum.2011.04.020 ↗
20. Towards long-lasting antibacterial stainless steel surfaces by combining double glow plasma silvering with active screen plasma nitriding10.1016/j.actbio.2010.08.009 ↗
21. Investigation of nitrogen mass transfer within an industrial plasma nitriding system I: the role of surface deposits10.1016/j.surfcoat.2009.08.029 ↗
22. Investigation of nitrogen mass transfer within an industrial plasma nitriding system II: application of a biased screen10.1016/j.surfcoat.2009.08.030 ↗
23. The generation of wear-resistant antimicrobial stainless steel surfaces by active screen plasma alloying with N and nanocrystalline Ag10.1002/jbm.b.31573 ↗
24. Effect of post-oxidizing on tribological and corrosion behaviour of plasma nitrided AISI 5140 steel10.1016/S0257-8972(03)00770-9 ↗
25. The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel10.1016/j.apsusc.2013.06.152 ↗
26. Influence of the chemical surface structure on the nanoscale friction in plasma nitrided and post-oxidized ferrous alloy10.1063/1.4894803 ↗
27. Machining with AlCr-oxinitride PVD coated cutting tools10.1016/j.triboint.2013.03.020 ↗
28. Characterization of tribological behavior and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures10.1016/j.triboint.2014.08.016 ↗
29. The response of austenitic stainless steels to low-temperature plasma nitriding
30. Lattice rotation induced by plasma nitriding in a 316L polycrystalline stainless steel10.1016/j.actamat.2010.01.002 ↗
31. Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time10.1016/j.apsusc.2014.01.177 ↗
32. Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels10.1016/j.matchar.2014.07.006 ↗
33. New insights into the mechanism of low-temperature active-screen plasma nitriding of austenitic stainless steel10.1016/j.scriptamat.2012.03.028 ↗
34. Industrial application of AISI 4340 steels treated in cathodic cage plasma nitriding technique10.1016/j.msea.2007.06.033 ↗
35. Can oxygen stabilize chromium nitride?—Characterization of high temperature cycled chromium oxynitride10.1016/S0040-6090(03)01066-6 ↗
36. S phase surface engineering of Fe-Cr, Co-Cr and N-Cr alloys10.1179/095066009X12572530170589 ↗
37. Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding10.1016/S0257-8972(99)00085-7 ↗
38. Phase transformation from Fe4N to Fe3O4 due to electron irradiation in the transmission electron microscope10.1016/j.actamat.2003.12.011 ↗
39. Modifying the properties of AISI 316L steel by glow discharge assisted low-temperature nitriding and oxynitriding10.1016/j.vacuum.2010.05.006 ↗