Effects of surface “micro-holes” on the flashover properties of a disk-type ceramic-vacuum insulator
Source abstract
Abstract
Abstract A surface treatment method is proposed which creates surface “micro-holes” to improve the flashover properties of large disk-type alumina ceramic-vacuum insulators operating under high pulsed voltages. This method eliminates residual surface flashover traces and recovers the insulation strength. A structure optimized ceramic vacuum insulator was treated with this method and tested using a high-voltage pulse modulator (600 kV, 100 ns). Experimental results show that this treatment can improve the insulation reliability greatly. Scanning electron microscope (SEM) and laser scanning confocal microscope (LSCM) were applied to investigate the influence of surface micro-hole on flashover properties. It was found that the width (W) and depth (D) of micro-holes greatly influenced flashover properties. A D/W ratio was introduced to explain the mechanism of this improvement. The surface micro-holes had the greatest beneficial effect on insulation strength when the ratio was between 1.2 and 2.0. A mechanism explaining the effect of surface “micro-hole” on the flashover properties was proposed. Simulation results of VSim-PIC code corroborate our observations and explanation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High voltage insulation and dielectric phenomena · Vacuum and Plasma Arcs · Electrostatic Discharge in Electronics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Time-and space-resolved light emission and spectroscopic research of the flashover plasma10.1063/1.4913213 ↗
2. Secondary electron emission and surface charging evaluation of alumina ceramics and sapphire10.1109/TDEI.2006.1593403 ↗
3. Flashover of insulators in vacuum: the last twenty years10.1109/TDEI.2015.004702 ↗
4. Probabilistic model for the simulation of secondary electron emission10.1103/PhysRevSTAB.5.124404 ↗
5. Latham · 1995
6. Benford · 2015
7. Experimental research of different plasma cathodes for generation of high-current electron beams10.1063/1.4935880 ↗
8. A high-efficiency repetitively pulsed magnetically insulated transmission line oscillator10.1016/j.vacuum.2016.03.006 ↗
9. Effects of vacuum pressures on the performance of a velvet cathode under repetitive high-current pulse discharges10.1016/j.vacuum.2010.07.004 ↗
10. Maintenance of high vacuum level in a compact and lightweight sealed hard-tube magnetically insulated line oscillator system10.1016/j.vacuum.2014.09.019 ↗
11. High-current, pulsed electron beam sources with SiC nanowire cathodes10.1016/j.vacuum.2015.11.023 ↗
12. A high-vacuum high-electric-field pulsed power interface based on a ceramic insulator10.1109/TPS.2015.2497276 ↗
13. A ceramic radial insulation structure for a relativistic electron beam vacuum diode10.1063/1.2936884 ↗
14. Hydrodynamic loading of ceramic components due to pulsed discharge in water10.1109/TPS.2009.2016201 ↗
15. Surface charges on alumina in vacuum with varying surface roughness and electric field distribution10.1109/TDEI.2007.369523 ↗
16. Enhanced surface flashover strength in vacuum of polymethylmethacrylate by surface modification using atmospheric-pressure dielectric barrier discharge10.1063/1.4893884 ↗
17. Estimation of flashover voltage along cylindrical insulator in vacuum10.1109/TDEI.2015.005212 ↗
18. Effect of mechanical finishes on secondary electron emission of alumina ceramics10.1109/TDEI.2007.369522 ↗
19. Surface resistivity tailoring of ceramic insulators for an ion microprobe application10.1016/j.surfcoat.2006.10.051 ↗
20. Effect of surface shallow traps on flashover characteristics across machinable ceramic in vacuum10.1109/TDEI.2008.4656257 ↗
21. Influence of surface ion exchange on pulsed flashover characteristics of machinable ceramics in vacuum10.1109/TDEI.2011.5976089 ↗
22. Flashover of insulators in vacuum: review of the phenomena and techniques to improved holdoff voltage10.1109/14.231534 ↗
23. Ceramic secondary electron emission and surface charge measurements10.1109/TPS.2002.805370 ↗
24. Control of charge on insulating glass in vacuum by plasma processing10.1109/94.993740 ↗
25. High-energy metal ion implantation for reduction of surface resistivity of alumina ceramic10.1063/1.3670599 ↗
26. Savkin · 2012 · 89
27. Asari · 2014 · 554
28. Compact rep-rate GW pulsed generator based on forming line with built-in high-coupling transformer10.1109/TPS.2013.2288333 ↗
29. Simulation of secondary electron emission from rough surfaces10.1016/0022-3115(94)00460-9 ↗
30. Perkins · 2009 · 441
31. Perkins · 2010 · 727
32. Initiation of vacuum insulator surface high-voltage flashover with electrons produced by laser illumination10.1063/1.4928580 ↗
33. Effects of dielectric constant on surface discharge of polymer insulators in vacuum10.1063/1.1662683 ↗
34. Flashover voltage over ceramic in high vacuum10.1143/JJAP.13.1541 ↗
35. Whitehouse · 2004