journal article·2016-07

The influence of Ce content and preparation temperature on the microstructure and oxidation behavior of Ce–modified Cr coating on open–cell NiCrFe alloy foam

Q. Pang, Z.L. Hu, D.L. Sun

Vacuum· Volume 129
Publisher page

Abstract

Abstract The Ce/Cr coating was deposited onto the surface of the open–cell Ni Cr Fe alloy foam by the pack cementation. The effects of process parameters (Ce content and preparation temperature) on the microstructure and oxidation behavior of the Ce/Cr coatings were systematically investigated. Isothermal oxidation tests of Ce/Cr coatings with various Ce contents were performed at 1000 °C for 120 h, which were also compared with those of the substrate and Cr coating. Scanning electron microscopy and energy dispersive analysis (SEM/EDS) were used to investigate the microstructure and chemical composition of the Ce/Cr coatings before and after oxidation, respectively. The results show that the addition of CeO2 powders in the packs distinctly influences the coating thickness, the contents of Cr, and the density of cavities in the coatings. In addition, the oxidation resistance of the Ce/Cr coatings is improved with the adding of Ce element. This is due to that these large Ce atoms give rise to a “site-blocking” effect for the outward transport of the cations and the inward Cr diffusion. As a result, Cr2O3 content is increased sharply in the oxide layer. Especially the 2 wt% Ce/Cr coating exhibits the best oxidation resistance performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Electroless Ni–Cu–P plating onto open cell stainless steel foam
2. Synthesis and mechanical properties of open-cell Ni–Fe–Cr foams10.1016/j.msea.2011.12.034 ↗
3. Mechanical properties of reticulated aluminum foams with electrodeposited Ni–W coatings10.1016/j.scriptamat.2008.03.035 ↗
4. Study of oxidation-resistant NiCrAl-Al coatings co-deposited by electrophoresis on nickel foams10.1016/j.scriptamat.2006.02.050 ↗
5. Nickel foams with oxidation-resistant coatings formed by combustion synthesis10.1016/j.scriptamat.2008.01.014 ↗
6. Mechanical properties of oxidation-resistant Ni–Cr foams10.1016/S0921-5093(04)00814-7 ↗
7. Synthesis, structure, and mechanical properties of Ni–Al and Ni–Cr–Al superalloy foams10.1016/j.actamat.2003.11.012 ↗
8. Synthesis of nickel-aluminide foams by pack-aluminization of nickel foams10.1016/S0966-9795(01)00047-4 ↗
9. Effect of reactive element oxide coating on the high temperature oxidation behaviour of FeCrAl alloys10.1016/j.apsusc.2004.01.072 ↗
10. Formation of perovskite type phases during the high temperature oxidation of stainless steels coated with reactive element oxides10.1016/S1359-6454(02)00106-4 ↗
11. Mechanical properties and phase composition of potential biodegradable Mg-Zn-Mn-base alloys with addition of rare earth elements10.1016/j.matchar.2010.06.004 ↗
12. Microstructure and properties of HVOF-sprayed NiCrAlY coatings modified by rare earth10.1007/s11666-014-0097-y ↗
13. Microstructures, properties and high-temperature carburization resistances of HVOF thermal sprayed NiAl intermetallic-based alloy coatings10.1016/j.surfcoat.2003.08.080 ↗
14. Microstructure, oxidation resistance and high-temperature strength of a new class of 3D open–cell nickel-based foams10.1016/j.matchar.2012.05.010 ↗
15. A dual-layer Ce-Cr/Al oxidation resistant coating for 3D open-cell nickel based foams by a two-step pack cementation10.1016/j.msea.2013.01.032 ↗
16. Pack cementation aluminide coatings on superalloys: codeposition of Cr and reactive elements10.1149/1.2056219 ↗
17. Consequence of source material on the surface properties of nebulizer spray coated cerium oxide thin films10.1016/j.vacuum.2014.06.016 ↗
18. Influence of rare earth on carbide in weld metal
19. Comparison about effects of Ce, Sn and Gd additions on as-cast microstructure and mechanical properties of Mg-3.8Zn-2.2Ca (wt.%) magnesium alloy10.1007/s10853-009-3696-0 ↗
20. Effect of Ce and La on microstructure and properties of a 6xxx series type aluminum alloy10.1007/s10853-008-3022-2 ↗
21. Oxidation of a novel chromium coating with CeO2 dispersions10.1007/s11085-004-0921-8 ↗
22. Oxidation of a novel CeO2-dispersion-strengthened chromium coating in simulated coal-combustion gases10.1016/j.msea.2006.04.030 ↗
23. Huang · 2007 · 78
24. Microstructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb–Ti–Si based ultrahigh temperature alloy10.1016/j.pnsc.2013.02.003 ↗
25. Cao · 2007 · 128
26. Effect of rare earth on B-Al permeating and computer kinetic simulation of permeation layer forming
27. Influence of process parameters on thickness and wear resistance of rare earth modified chromium coatings on P110 steel synthesized by pack cementation10.1016/S1002-0721(10)60467-X ↗
28. Synthesis and properties of open-cell Ni–Cr–Fe–Al alloy foams by pack co-deposition process10.1016/j.jmatprotec.2012.06.017 ↗
29. Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect10.1007/BF01046818 ↗
30. Role of rare earth oxide coatings on oxidation resistance of chromia-forming alloys10.1007/s10853-007-1855-8 ↗
31. Effects of temperature and rare earth content on oxidation resistance of Ni-based superalloy10.1016/S1002-0071(12)60035-5 ↗
32. (001) CeO2 films epitaxially grown on SrTiO3(001) substrates by pulsed laser deposition using a metallic Ce target10.1016/j.vacuum.2012.07.012 ↗
33. Effect of rare earth on oxidation resistance of iron base fluxing alloy spray-welding coating10.1016/S0925-8388(00)00863-X ↗