Hemocompatibility of ZnO thin films prepared by filtered cathodic vacuum arc deposition
Source abstract
Abstract
Abstract Zinc Oxide (ZnO) thin films were prepared by cathodic vacuum arc deposition (CVAD) and filtered cathodic vacuum arc deposition (FCVAD) technology with a mixture of O2, Ar and N2. XRD patterns indicated that ZnO thin films prepared by CVAD had a combined orientation of ZnO (002) and ZnO (101). The preferential orientation ZnO (002) could be obtained at an optimum deposition pressure. On the other hand, a perfectly oriented ZnO (002) thin film prepared by FCVAD was obtained in lower pressure, which was beneficial to enhance the crystallization. The wetting behavior showed that all the ZnO thin films prepared by FCVAD were hydrophobic with low surface energy, but the reference samples of the polyurethane (PU) and glass are hydrophilic. Platelet adhesion test indicated that fewer platelets adhered and aggregated on the ZnO thin films prepared by FCVAD. The mechanism of hemocompatibility of ZnO thin films has also been investigated. It is suggested that hydrophobic surface with lower polar component and adhesive work are the two factors responsible for the excellent hemocompatibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Surface engineered polymeric biomaterials with improved biocontact properties10.1155/2010/296094 ↗
2. Hemocompatibility of titanium-based coatings prepared by metal plasma immersion ion implantation and deposition10.1016/j.nimb.2006.12.169 ↗
3. Evaluation on corrosion behavior and haemocompatibility of phosphorus incorporated tetrahedral amorphous carbon films10.1016/j.msec.2008.03.007 ↗
4. High-performance ZnO thin-film transistors on gate dielectrics grown by atomic layer deposition10.1063/1.2188379 ↗
5. Observation of 430 nm electroluminescence from ZnO/GaN heterojunction light-emitting diodes10.1063/1.1615308 ↗
6. Hydrogen induced metallicity on the ZnO(1010) surface10.1103/PhysRevLett.95.266104 ↗
7. High resistive layers toward ZnO-based enzyme modified field effect transistor10.1016/j.snb.2003.12.022 ↗
8. Material and device properties of ZnO-based film bulk acoustic resonator for mass sensing applications10.1016/j.apsusc.2007.05.081 ↗
9. Piezoelectric nanogenerators based on zinc oxide nanowire arrays10.1126/science.1124005 ↗
10. Dissolving behavior and stability of ZnO wires in biofluids: a study on biodegradability and biocompatibility of ZnO nanostructures10.1002/adma.200600200 ↗
11. Influence of annealing on the structural and optical properties of ZnO films grown by MOCVD10.1016/j.jallcom.2011.03.036 ↗
12. Low temperature annealing effects on the structure and optical properties of ZnO films grown by pulsed laser deposition10.1016/j.vacuum.2010.01.059 ↗
13. Growth of single-crystalline ZnO film with two-dimensional periodic structureon Si(111) substrate by molecular beam epitaxy10.1016/j.jcrysgro.2008.09.140 ↗
14. Optical and photoconductivity properties of ZnO thin films grown by pulsed filtered cathodic vacuum arc deposition10.1016/j.vacuum.2008.04.021 ↗
15. Influence of O2 flow rate on structure and properties of MgOx films prepared by cathodic-vacuum-arc ion deposition system10.1109/TPS.2006.876488 ↗
16. Effect of surface microstructure and wettability on plasma protein adsorption to ZnO thin films prepared at different RF powers10.1088/1748-6041/5/5/054116 ↗
17. Influence of silicon concentration on the haemocompatibility of amorphous carbon10.1016/j.biomaterials.2007.05.031 ↗