journal article·2014-11

Microstructure and mechanical properties of a Mo-toughened Mo3Si-based in situ nanocomposite

Jiang Xu, Wei Hu, Yong Yan, Xiaolin Lu, Paul Munroe, Zong-Han Xie

Vacuum· Volume 109
Publisher page

Abstract

Abstract To explore the plasticity of cubic A15-structured Mo 3 Si, mechanical parameters, including bulk modulus, shear modulus, Young's modulus, Cauchy's pressure and Poisson's ratio are obtained from first-principles calculations. Subsequently, a Mo-toughened Mo 3 Si-based nanocomposite coating is synthesized in-situ onto a Ti–6Al–4V substrate by a double glow discharge plasma technique. The new coating exhibits a dual-phase microstructure, where a coarser-grained Mo-rich phase is uniformly distributed within a finer-grained Mo 3 Si matrix. The results show that the incorporation of the “coarser-grained” Mo phase improves both damage resistance and hardness of the monolithic Mo 3 Si nanocrystalline coating.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · MXene and MAX Phase Materials · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings10.1016/S1359-6454(03)00465-8 ↗
2. Mechanical behaviour and oxidation resistance of structural silicides10.1179/174328006X79454 ↗
3. Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy-SiC composite processed by reaction hot pressing10.1016/j.msea.2004.04.063 ↗
4. Effect of small aluminum additions on microstructure and mechanical properties of molybdenum di-silicide10.1016/S0966-9795(98)00064-8 ↗
5. Tensile deformation and fracture behaviour in NbSi2 and MoSi2single crystals10.1016/S1359-6454(02)00185-4 ↗
6. Damage-tolerant, hard nanocomposite coatings enabled by a hierarchical structure10.1021/jp204091e ↗
7. The effects of substitution of Cr for Mo on the mechanical properties of nanocrystalline Mo5Si3 films10.1039/B9NR00225A ↗
8. Mechanical behavior of MoSi2 and MoSi2 composites10.1016/0921-5093(94)03246-7 ↗
9. Thermal oxidation kinetics of MoSi2-based powders10.1111/j.1151-2916.1999.tb02156.x ↗
10. Wear performance of Nb-alloyed, pulsed plasma nitrided Mo3Si intermetallic10.1016/j.ijrmhm.2006.06.004 ↗
11. The influence of powder characteristics on mechanical properties of Al2O3–TiC–Co ceramic materials prepared by co-coated Al2O3/TiC powders10.1016/j.ijrmhm.2012.04.015 ↗
12. Effect of (Ni,Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials10.1016/j.msea.2006.07.012 ↗
13. Ambient to high temperature fracture toughness and fatigue-crack propagation behavior in a Mo–12Si–8.5B(at.%) intermetallic10.1016/S0966-9795(01)00008-5 ↗
14. Hardness to toughness relationship of fine-grained WC-Co hardmetals10.1016/S0263-4368(98)00028-6 ↗
15. Deformation of a multiphase Mo–9.4Si–13.8B alloy at elevated temperatures10.1016/S0966-9795(00)00098-4 ↗
16. Microstructure and dry sliding wear resistance of moss-toughened Mo2Ni3Si metal silicide alloys10.1016/j.ijrmhm.2006.11.001 ↗
17. A Mo–Si–B intermetallic alloy with a continuous a-Mo matrix10.1016/S1359-6462(01)01227-1 ↗
18. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
19. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
20. Designing meaningful density functional theory calculations in materials science-a primer
21. Theoretical study of the phase stability and site preference for R3(Fe,T)29 (R = Nd, Sm; T = V, Ti, Cr, Cu, Nb, Mo, Ag)10.1016/S0925-8388(01)01863-1 ↗
22. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
23. Structural, thermodynamic and optical properties of MgF2 studied from first-principles theory10.1016/j.jssc.2010.11.025 ↗
24. First-principles calculations of electronic, optical, and thermodynamic properties of SrSi210.1063/1.3532031 ↗
25. The elastic behavior of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
26. Ab initio studies of Mo-based alloys: mechanical, elastic, and vibrational properties10.1016/j.intermet.2013.03.002 ↗
27. Intrinsic brittlement of Mo3Si by first-principle calculations10.4028/www.scientific.net/MSF.747-748.63 ↗
28. Theoretical predictions of structure and related properties of intermetallics10.1179/mst.1992.8.4.345 ↗
29. Relations between elastic moduli and plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
30. Poisson's ratio and modern materials10.1038/nmat3134 ↗
31. Tanaka · Intermetallics · 1998 · 6 · 60710.1016/S0966-9795(98)00057-0 ↗
32. High temperature deformation of A15 Mo3Si single crystals10.1016/S1359-6462(02)00360-3 ↗
33. Microstructures and mechanical properties of a Mo3 Si–Mo5 Si3 composite10.1016/S1359-6462(98)00406-0 ↗
34. Toward a quantitative understanding of mechanical behavior of nanocrystalline metals10.1016/j.actamat.2007.01.038 ↗
35. Effects of laminate architecture on fracture resistance of Sponge Biosilica: lessons from nature10.1002/adfm.200701135 ↗
36. Mechanical and tribological properties of amorphous carbon films deposited on implanted steel substrates10.1016/j.tsf.2003.12.073 ↗
37. Hard and superhard nanocomposite coatings10.1016/S0257-8972(99)00586-1 ↗
38. Tribological properties of a-C/Cr(N) coatings in micro and nano-scales10.1016/j.surfcoat.2006.07.220 ↗
39. Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate10.1016/j.surfcoat.2008.06.055 ↗
40. Analysis of an ultra hard magnetic biomineral in chiton radular teeth10.1016/S1369-7021(10)70016-X ↗
41. Studies on synthesis and characterization of Mo based in situ composite by silicothermy co-reduction process10.1007/s11663-011-9513-6 ↗
42. Synthesis and characterization of Mo3Si single crystal10.1016/j.jcrysgro.2008.05.044 ↗
43. The Hall–Petch breakdown in nanocrystalline metals: a crossover to glass-like deformation10.1016/j.actamat.2007.07.020 ↗
44. A maximum in the strength of nanocrystalline copper10.1126/science.1086636 ↗
45. Deformation twinning in nanocrystalline aluminum10.1126/science.1083727 ↗
46. Effect of grain size on the fracture toughness of nanocrystalline FeMoSiB10.1016/S1359-6462(01)01066-1 ↗
47. Mechanical properties of sputter-deposited nanocrystalline Cr3Si film10.1016/j.matlet.2009.02.025 ↗
48. Novel Ti-base nanostructure-dendrite composite with enhanced plasticity10.1038/nmat792 ↗
49. Mechanisms of fatigue-crack propagation in ductile and brittle solids10.1023/A:1018655917051 ↗
50. A three-dimensional analysis of crack trapping and bridging by tough particles10.1016/0022-5096(91)90026-K ↗
51. Composite formed by precipitation of dendritic ductile intermetallic in metallic glass10.1103/PhysRevLett.84.2901 ↗
52. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗