journal article·2015-06

Effect of sealing temperature on the sealing edge performance of vacuum glazing

Hong Miao, Xiang Shan, Jianfeng Zhang, Juan Sun, Hongjun Wang

Vacuum· Volume 116
Publisher page

Abstract

Abstract Because inadequate control of the temperature of vacuum glazing may cause changes in form, stress, microstructure, or performance and thereby affect its lifetime, vacuum welding has been adopted to seal the vacuum glazing from the side, and experiments using different sealing temperatures have been executed. The impact of different sealing temperatures on the microstructure of the sealing layer was analyzed to evaluate the combination of material science features on the interface and to reveal the influence of the sealing temperature on the hardness and residual stress of the sealing layer. The results show that a sufficiently high sealing temperature will drive the sealing layer to transform from a hybrid structure to the liquid phase, accelerate the element migration, eliminate pores, stabilize and compact the structure and improve the sealing performance of the vacuum glazing. As the sealing temperature increases, the residual stress and hardness substantially increase. However, when the sealing temperature reaches 460 °C, the residual stress and hardness begin to plateau, and when the sealing temperature reaches 470 °C, no further change can be detected. Therefore, a sufficiently high sealing temperature is beneficial to the bonding of glass and sealing solder and can promote the sealing performance of the vacuum glazing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building Energy and Comfort Optimization · Aerogels and thermal insulation · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Optical properties of soda-lime float glass from spectroscopic ellipsometry10.1016/j.tsf.2010.12.110 ↗
2. Sealing properties of BaO–CaO–Al2O3–B2O3–SiO2 glass ceramics to large size planar IT-SOFC
3. Synergic effect of V2O5 and P2O5 on the sealing properties of barium-strontium-alumino-silicate glass/glass-ceramics10.1016/j.ijhydene.2013.09.052 ↗
4. Evacuated windows-theory and practice
5. Fabrication of evacuated glazing at low temperature10.1016/S0038-092X(98)00019-X ↗
6. Numerical calculation and experimental research on wind load of vacuum plate glass
7. Indium alloy-sealed vacuum glazing development and context10.1016/j.rser.2014.05.029 ↗
8. Thermal conductance measurement on vacuum glazing10.1016/j.ijheatmasstransfer.2006.05.032 ↗
9. Structure and sealing properties of Bi2O3–BaO–SiO2–RxOy glass
10. Study on active brazing of AlN ceramics and Mo–Ni–Cu alloy
11. Theoretical analysis and experimental study on heat transfer in vacuum plate glass
12. Finite-element analysis of static and modal response of He vacuum plate glass
13. Sealing technology of the SiO2–BaO system glass and metal
14. Effects of GeO2 on structure and properties of PbO–B2O3–ZnO